Am Mittwoch, dem 17.11.2021 um 19:16 +0200 schrieb Laurent Pinchart: > On Wed, Nov 17, 2021 at 02:51:48PM +0000, Rui Miguel Silva wrote: > > Hi Martin, > > Thanks for the patch. > > > > On Wed Nov 17, 2021 at 9:27 AM WET, Martin Kepplinger wrote: > > > > > Modeled after the NXP driver mx6s_capture.c that this driver is > > > based on, > > > imx8mq needs different settings for the baseaddr_switch > > > mechanism. Define > > > the needed bits and set that for imx8mq. > > > > > > Without these settings, the system will "sometimes" hang > > > completely when > > > starting to stream (the interrupt will never be called). > > Do we know why ? Are all the bits that you set required ? tbh I don't know much more details about why. I debugged this quite a while and yes, from what I saw I need all these bits set. rx fifo overflow should be taken care of by the underrun buffer, but since imx8mq has an erratum that hangs the system in such case, see below, can it in any way be one reason for this to be needed? https://community.nxp.com/t5/i-MX-Processors/IMX8MQ-MIPI-CSI2-Base-address-switching-change-error/m-p/1216509/highlight/true#M167970 intuitively I'd say it's unrelated though. > > > > Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx> > > > --- > > > drivers/staging/media/imx/imx7-media-csi.c | 34 > > > ++++++++++++++++++++-- > > > 1 file changed, 32 insertions(+), 2 deletions(-) > > > > > > diff --git a/drivers/staging/media/imx/imx7-media-csi.c > > > b/drivers/staging/media/imx/imx7-media-csi.c > > > index 2288dadb2683..8619cf2fc694 100644 > > > --- a/drivers/staging/media/imx/imx7-media-csi.c > > > +++ b/drivers/staging/media/imx/imx7-media-csi.c > > > @@ -12,6 +12,7 @@ > > > #include <linux/interrupt.h> > > > #include <linux/mfd/syscon.h> > > > #include <linux/module.h> > > > +#include <linux/of_device.h> > > > #include <linux/of_graph.h> > > > #include <linux/pinctrl/consumer.h> > > > #include <linux/platform_device.h> > > > @@ -122,6 +123,10 @@ > > > #define BIT_DATA_FROM_MIPI BIT(22) > > > #define BIT_MIPI_YU_SWAP BIT(21) > > > #define BIT_MIPI_DOUBLE_CMPNT BIT(20) > > > +#define BIT_MASK_OPTION_FIRST_FRAME (0 << 18) > > > +#define BIT_MASK_OPTION_CSI_EN (1 << 18) > > > +#define BIT_MASK_OPTION_SECOND_FRAME (2 << 18) > > > +#define BIT_MASK_OPTION_ON_DATA (3 << 18) > > > #define BIT_BASEADDR_CHG_ERR_EN BIT(9) > > > #define BIT_BASEADDR_SWITCH_SEL BIT(5) > > > #define BIT_BASEADDR_SWITCH_EN BIT(4) > > > @@ -154,6 +159,12 @@ > > > #define CSI_CSICR18 0x48 > > > #define CSI_CSICR19 0x4c > > > > > > +enum imx_soc { > > > + IMX6UL = 0, > > > + IMX7, > > > + IMX8MQ, > > > > maybe instead of this enum we could use a bool in structure... > > An enum would be more extensible, but we shouldn't define different > values for IMX6UL and IMX7 if they're compatible. Maybe an enum > imx_csi_model with two values (IMX_CSI_IMX7 and IMX_CSI_IMX8MQ ?). > > Are there other SoCs in the i.MX8 family that require this ? The BSP > driver sets the baseaddr switch mechanism for i.MX8MM too, but it > seems > to work fine without it. I'm looking at https://source.codeaurora.org/external/imx/linux-imx/tree/drivers/media/platform/mxc/capture/mx6s_capture.c?h=imx_5.4.70_2.3.0 for the comparison that is not explicitly targeting imx8mm, right? Anyway it looks like we need these bits on imx8mq only. Sorry, but maybe somebody from NXP could tell us more about the reasons? thanks a lot for reviewing, I'll queue a v2. > > > > +}; > > > + > > > struct imx7_csi { > > > struct device *dev; > > > struct v4l2_subdev sd; > > > @@ -189,6 +200,8 @@ struct imx7_csi { > > > bool is_csi2; > > > > > > struct completion last_eof_completion; > > > + > > > + enum imx_soc type; > > > > here, bool is_imx8mq? > > > > > }; > > > > > > static struct imx7_csi * > > > @@ -537,6 +550,16 @@ static void imx7_csi_deinit(struct imx7_csi > > > *csi, > > > clk_disable_unprepare(csi->mclk); > > > } > > > > > > +static void imx8mq_baseaddr_switch(struct imx7_csi *csi) > > > > I think this function needs a better name. First add the imx7_csi > > prefix that all functions have, and also you are setting it > > specific > > to second frame and the function should not be specific to imx8. > > > > maybe something: > > > > imx7_csi_write_on_second_frame_enable, maybe? > > > > > +{ > > > + u32 cr18 = imx7_csi_reg_read(csi, CSI_CSICR18); > > > + > > > + cr18 |= BIT_BASEADDR_SWITCH_EN | BIT_BASEADDR_SWITCH_SEL > > > | > > > + BIT_BASEADDR_CHG_ERR_EN; > > > + cr18 |= BIT_MASK_OPTION_SECOND_FRAME; > > > + imx7_csi_reg_write(csi, cr18, CSI_CSICR18); > > > +} > > > + > > > static void imx7_csi_enable(struct imx7_csi *csi) > > > { > > > /* Clear the Rx FIFO and reflash the DMA controller. */ > > > @@ -551,7 +574,11 @@ static void imx7_csi_enable(struct imx7_csi > > > *csi) > > > > > > /* Enable the RxFIFO DMA and the CSI. */ > > > imx7_csi_dmareq_rff_enable(csi); > > > + > > > > unrelated new line. > > > > > imx7_csi_hw_enable(csi); > > > + > > > + if (csi->type == IMX8MQ) > > > + imx8mq_baseaddr_switch(csi); > > > > change this to new types and names? > > > > > } > > > > > > static void imx7_csi_disable(struct imx7_csi *csi) > > > @@ -1155,6 +1182,8 @@ static int imx7_csi_probe(struct > > > platform_device *pdev) > > > if (IS_ERR(csi->regbase)) > > > return PTR_ERR(csi->regbase); > > > > > > + csi->type = (enum imx_soc)of_device_get_match_data(&pdev- > > > >dev); > > > > here something: > > csi->is_imx8mq = of_device_is_compatible(np, "fsl,imx8mq- > > csi"); > > > > > + > > > spin_lock_init(&csi->irqlock); > > > mutex_init(&csi->lock); > > > > > > @@ -1249,8 +1278,9 @@ static int imx7_csi_remove(struct > > > platform_device *pdev) > > > } > > > > > > static const struct of_device_id imx7_csi_of_match[] = { > > > - { .compatible = "fsl,imx7-csi" }, > > > - { .compatible = "fsl,imx6ul-csi" }, > > > + { .compatible = "fsl,imx8mq-csi", .data = (void *)IMX8MQ > > > }, > > > > and with the above you should not need to add the data field here. > > I like match data personally (especially if we keep a device model > enum). This is exactly what match data has been designed for, to > avoid > is_compatible() checks. > > > > + { .compatible = "fsl,imx7-csi", .data = (void *)IMX7 }, > > > + { .compatible = "fsl,imx6ul-csi", .data = (void *)IMX6UL > > > }, > > > { }, > > > }; > > > MODULE_DEVICE_TABLE(of, imx7_csi_of_match); >
