Re: [PATCH v10, 15/19] dt-bindings: media: mtk-vcodec: Adds decoder dt-bindings for mt8192

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Yunfei,

On Thu, 11 Nov 2021 at 01:15, Yunfei Dong <yunfei.dong@xxxxxxxxxxxx> wrote:
>
> Adds decoder dt-bindings for mt8192.
>
> Signed-off-by: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
> ---
>  .../media/mediatek,vcodec-subdev-decoder.yaml | 261 ++++++++++++++++++
>  1 file changed, 261 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
> new file mode 100644
> index 000000000000..1886fae6e39d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
> @@ -0,0 +1,261 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/media/mediatek,vcodec-subdev-decoder.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: Mediatek Video Decode Accelerator With Multi Hardware
> +
> +maintainers:
> +  - Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
> +
> +description: |
> +  Mediatek Video Decode is the video decode hardware present in Mediatek
> +  SoCs which supports high resolution decoding functionalities. Required
> +  main and subdev device node.
> +
> +  About the Decoder Hardware Block Diagram, please check below:
> +
> +    +---------------------------------+------------------------------------+
> +    |                                 |                                    |
> +    | input -> lat HW -> lat buffer --|--> lat buffer -> core HW -> output
 |

To be completely honest, I can't really understand what is the meaning
of the blocks
with input -> lat hw -> lat buffer, and how this means lat- and core-
are children of some parent.

> +    |            ||                   |                     ||             |
> +    +------------||-------------------+---------------------||-------------+
> +                 ||       lat thread  |  core thread        ||     <parent>
> +    -------------||-----------------------------------------||----------------
> +                 ||                                         ||     <child>
> +                 \/ <----------------HW index-------------->\/
> +           +------------------------------------------------------+
> +           |                    enable/disable                    |
> +           |           clk     power    irq    iommu port         |
> +           |                 (lat/lat soc/core0/core1)            |
> +           +------------------------------------------------------+
> +
> +  As above, <parent> mean in main device, <child> mean in subdev device. The information
> +  of each hardware will be stored in subdev device. There are two workqueues in main device:
> +  lat and core. Enable/disable the lat clk/power/irq when lat need to work through hardware
> +  index, core is the same.
> +
> +  Normally the smi common may not the same for each hardware, can't combine all hardware in
> +  one node, or leading to iommu fault when access dram data.
> +

To what extent the lat- and core- devices are really "children"
or "subdevices" of the  video-codec@16000000 device?

I.e. what resources do they share? What are the details of
their bus topology?

> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/memory/mt8192-larb-port.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/clock/mt8192-clk.h>
> +    #include <dt-bindings/power/mt8192-power.h>
> +
> +    video-codec@16000000 {
> +        compatible = "mediatek,mt8192-vcodec-dec";
> +        reg = <0x16000000 0x1000>;             /* VDEC_SYS */
> +        mediatek,scp = <&scp>;
> +        iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>;
> +        dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges;
> +        vcodec-lat@16010000 {
> +            compatible = "mediatek,mtk-vcodec-lat";
> +            reg = <0x16010000 0x800>;
> +            interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>;
> +            iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>,
> +                <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>,
> +                <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>,
> +                <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>,
> +                <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>,
> +                <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>,
> +                <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>,
> +                <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>;
> +            clocks = <&topckgen CLK_TOP_VDEC_SEL>,
> +                <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
> +                <&vdecsys_soc CLK_VDEC_SOC_LAT>,
> +                <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
> +                <&topckgen CLK_TOP_MAINPLL_D4>;
> +            clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
> +            assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
> +            assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
> +            power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>;
> +        };
> +
> +        vcodec-core@16025000 {
> +            compatible = "mediatek,mtk-vcodec-core";
> +            reg = <0x16025000 0x1000>;

The children address space might need some thinking.
In other words,

video-codec@16000000 {

  vcodec-lat@16010000 {
  }

  vcodec-core@16025000 {
  }
}

Your proposal has vcodec-lat as children of video-codec, but its address space
are really on the same level, instead of children being contained in
the parent address space:

video-codec@16000000 {

  vcodec-lat@10000 {
  }

  vcodec-core@25000 {
  }
}

I think this last tree makes more sense from a device-tree point of view.
The ranges property allows you to put the right translation information,
so the device driver itself will get the correct address 0x16000000 + 0x25000.

You might find that the ranges property is tricky to understand at first.

Thanks,
Ezequiel


> +            interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>;
> +            iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>,
> +                <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>,
> +                <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>,
> +                <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>,
> +                <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>,
> +                <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>,
> +                <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>,
> +                <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>,
> +                <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>,
> +                <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>,
> +                <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>;
> +            clocks = <&topckgen CLK_TOP_VDEC_SEL>,
> +                <&vdecsys CLK_VDEC_VDEC>,
> +                <&vdecsys CLK_VDEC_LAT>,
> +                <&vdecsys CLK_VDEC_LARB1>,
> +                <&topckgen CLK_TOP_MAINPLL_D4>;
> +            clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
> +            assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
> +            assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
> +            power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>;
> +        };
> +    };
> --
> 2.25.1
>



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux