[PATCH 18/18] media: camss: Do vfe_get/vfe_put for csid on sm8250

["Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>]

The sm8250 CAMSS CSID depends on the VFE it is attached to being powered on
and clocked prior to taking the CSID out of reset.

It is possible to open just the CSID subdev from libcamera and attempt to
bring the CSID block up.

If we do not first bring up the VFE the CSID will fail to come out of
reset.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
 drivers/media/platform/qcom/camss/camss-csid.c | 12 +++++++++++-
 drivers/media/platform/qcom/camss/camss-vfe.c  |  4 ++--
 drivers/media/platform/qcom/camss/camss-vfe.h  |  3 +++
 3 files changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss-csid.c b/drivers/media/platform/qcom/camss/camss-csid.c
index 9ef6fbbeeddf..e6835b92695b 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.c
+++ b/drivers/media/platform/qcom/camss/camss-csid.c
@@ -156,10 +156,18 @@ static int csid_set_clock_rates(struct csid_device *csid)
 static int csid_set_power(struct v4l2_subdev *sd, int on)
 {
 	struct csid_device *csid = v4l2_get_subdevdata(sd);
-	struct device *dev = csid->camss->dev;
+	struct camss *camss = csid->camss;
+	struct device *dev = camss->dev;
+	struct vfe_device *vfe = &camss->vfe[csid->id];
 	int ret;
 
 	if (on) {
+		if (camss->version == CAMSS_8250) {
+			ret = vfe_get(vfe);
+			if (ret < 0)
+				return ret;
+		}
+
 		ret = pm_runtime_resume_and_get(dev);
 		if (ret < 0)
 			return ret;
@@ -204,6 +212,8 @@ static int csid_set_power(struct v4l2_subdev *sd, int on)
 		camss_disable_clocks(csid->nclocks, csid->clock);
 		ret = csid->vdda ? regulator_disable(csid->vdda) : 0;
 		pm_runtime_put_sync(dev);
+		if (camss->version == CAMSS_8250)
+			vfe_put(vfe);
 	}
 
 	return ret;
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 5b5fe620914d..703ea39f1262 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -575,7 +575,7 @@ static int vfe_check_clock_rates(struct vfe_device *vfe)
  *
  * Return 0 on success or a negative error code otherwise
  */
-static int vfe_get(struct vfe_device *vfe)
+int vfe_get(struct vfe_device *vfe)
 {
 	int ret;
 
@@ -637,7 +637,7 @@ static int vfe_get(struct vfe_device *vfe)
  * vfe_put - Power down VFE module
  * @vfe: VFE Device
  */
-static void vfe_put(struct vfe_device *vfe)
+void vfe_put(struct vfe_device *vfe)
 {
 	mutex_lock(&vfe->power_lock);
 
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
index 6500474a749e..0eba04eb9b77 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.h
+++ b/drivers/media/platform/qcom/camss/camss-vfe.h
@@ -203,4 +203,7 @@ extern const struct vfe_hw_ops vfe_ops_4_8;
 extern const struct vfe_hw_ops vfe_ops_170;
 extern const struct vfe_hw_ops vfe_ops_480;
 
+int vfe_get(struct vfe_device *vfe);
+void vfe_put(struct vfe_device *vfe);
+
 #endif /* QC_MSM_CAMSS_VFE_H */
-- 
2.33.0