Hi Hans, Thanks for the set. On Mon, Oct 25, 2021 at 11:41:12AM +0200, Hans de Goede wrote: > The TPS68470 PMIC provides Clocks, GPIOs and Regulators. At present in > the kernel the Regulators and Clocks are controlled by an OpRegion > driver designed to work with power control methods defined in ACPI, but > some platforms lack those methods, meaning drivers need to be able to > consume the resources of these chips through the usual frameworks. > > This commit adds a driver for the regulators provided by the tps68470, > and is designed to bind to the platform_device registered by the > intel_skl_int3472 module. > > This is based on this out of tree driver written by Intel: > https://github.com/intel/linux-intel-lts/blob/4.14/base/drivers/regulator/tps68470-regulator.c > with various cleanups added. > > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > --- > Changes in v4: > - Make the top comment block use c++ style comments Why? > - Drop the bogus builtin regulator_init_data > - Add || COMPILE_TEST to Kconfig snippet > - Make the driver enable the PMIC clk when enabling the Core buck > regulator, this switching regulator needs the PLL to be on > > Changes in v2: > - Update the comment on why a subsys_initcall is used to register the drv > - Make struct regulator_ops const > --- > drivers/regulator/Kconfig | 9 ++ > drivers/regulator/Makefile | 1 + > drivers/regulator/tps68470-regulator.c | 215 +++++++++++++++++++++++++ > 3 files changed, 225 insertions(+) > create mode 100644 drivers/regulator/tps68470-regulator.c > > diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig > index 4fd13b06231f..1f6a6adc4ab0 100644 > --- a/drivers/regulator/Kconfig > +++ b/drivers/regulator/Kconfig > @@ -1339,6 +1339,15 @@ config REGULATOR_TPS65912 > help > This driver supports TPS65912 voltage regulator chip. > > +config REGULATOR_TPS68470 > + tristate "TI TPS68370 PMIC Regulators Driver" s/3/4/ > + depends on INTEL_SKL_INT3472 || COMPILE_TEST > + help > + This driver adds support for the TPS68470 PMIC to register > + regulators against the usual framework. > + > + The module will be called "tps68470-regulator". > + > config REGULATOR_TPS80031 > tristate "TI TPS80031/TPS80032 power regulator driver" > depends on MFD_TPS80031 > diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile > index 9e382b50a5ef..03c318110986 100644 > --- a/drivers/regulator/Makefile > +++ b/drivers/regulator/Makefile > @@ -158,6 +158,7 @@ obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o > obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o > obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o > obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o > +obj-$(CONFIG_REGULATOR_TPS68470) += tps68470-regulator.o > obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o > obj-$(CONFIG_REGULATOR_TPS65132) += tps65132-regulator.o > obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o twl6030-regulator.o > diff --git a/drivers/regulator/tps68470-regulator.c b/drivers/regulator/tps68470-regulator.c > new file mode 100644 > index 000000000000..7bce45df1596 > --- /dev/null > +++ b/drivers/regulator/tps68470-regulator.c > @@ -0,0 +1,215 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// > +// Regulator driver for TPS68470 PMIC > +// > +// Copyright (c) 2021 Red Hat Inc. > +// Copyright (C) 2018 Intel Corporation > +// > +// Authors: > +// Hans de Goede <hdegoede@xxxxxxxxxx> > +// Zaikuo Wang <zaikuo.wang@xxxxxxxxx> > +// Tianshu Qiu <tian.shu.qiu@xxxxxxxxx> > +// Jian Xu Zheng <jian.xu.zheng@xxxxxxxxx> > +// Yuning Pu <yuning.pu@xxxxxxxxx> > +// Rajmohan Mani <rajmohan.mani@xxxxxxxxx> > + > +#include <linux/clk.h> > +#include <linux/device.h> > +#include <linux/err.h> > +#include <linux/init.h> > +#include <linux/kernel.h> > +#include <linux/mfd/tps68470.h> > +#include <linux/module.h> > +#include <linux/platform_data/tps68470.h> > +#include <linux/platform_device.h> > +#include <linux/regulator/driver.h> > +#include <linux/regulator/machine.h> > + > +struct tps68470_regulator_data { > + struct clk *clk; > +}; > + > +#define TPS68470_REGULATOR(_name, _id, _ops, _n, _vr, \ > + _vm, _er, _em, _t, _lr, _nlr) \ > + [TPS68470_ ## _name] = { \ > + .name = # _name, \ > + .id = _id, \ > + .ops = &_ops, \ > + .n_voltages = _n, \ > + .type = REGULATOR_VOLTAGE, \ > + .owner = THIS_MODULE, \ > + .vsel_reg = _vr, \ > + .vsel_mask = _vm, \ > + .enable_reg = _er, \ > + .enable_mask = _em, \ > + .volt_table = _t, \ > + .linear_ranges = _lr, \ > + .n_linear_ranges = _nlr, \ > + } > + > +static const struct linear_range tps68470_ldo_ranges[] = { > + REGULATOR_LINEAR_RANGE(875000, 0, 125, 17800), > +}; > + > +static const struct linear_range tps68470_core_ranges[] = { > + REGULATOR_LINEAR_RANGE(900000, 0, 42, 25000), > +}; > + > +int tps68470_regulator_enable(struct regulator_dev *rdev) > +{ > + struct tps68470_regulator_data *data = rdev->reg_data; > + int ret; > + > + /* The Core buck regulator needs the PMIC's PLL to be enabled */ > + if (rdev->desc->id == TPS68470_CORE) { > + ret = clk_prepare_enable(data->clk); > + if (ret) { > + dev_err(&rdev->dev, "Error enabling TPS68470 clock\n"); > + return ret; > + } > + } > + > + return regulator_enable_regmap(rdev); > +} > + > +int tps68470_regulator_disable(struct regulator_dev *rdev) > +{ > + struct tps68470_regulator_data *data = rdev->reg_data; > + > + if (rdev->desc->id == TPS68470_CORE) > + clk_disable_unprepare(data->clk); > + > + return regulator_disable_regmap(rdev); > +} > + > +/* Operations permitted on DCDCx, LDO2, LDO3 and LDO4 */ > +static const struct regulator_ops tps68470_regulator_ops = { > + .is_enabled = regulator_is_enabled_regmap, > + .enable = tps68470_regulator_enable, > + .disable = tps68470_regulator_disable, > + .get_voltage_sel = regulator_get_voltage_sel_regmap, > + .set_voltage_sel = regulator_set_voltage_sel_regmap, > + .list_voltage = regulator_list_voltage_linear_range, > + .map_voltage = regulator_map_voltage_linear_range, > +}; > + > +static const struct regulator_desc regulators[] = { > + TPS68470_REGULATOR(CORE, TPS68470_CORE, > + tps68470_regulator_ops, 43, TPS68470_REG_VDVAL, > + TPS68470_VDVAL_DVOLT_MASK, TPS68470_REG_VDCTL, > + TPS68470_VDCTL_EN_MASK, > + NULL, tps68470_core_ranges, > + ARRAY_SIZE(tps68470_core_ranges)), > + TPS68470_REGULATOR(ANA, TPS68470_ANA, > + tps68470_regulator_ops, 126, TPS68470_REG_VAVAL, > + TPS68470_VAVAL_AVOLT_MASK, TPS68470_REG_VACTL, > + TPS68470_VACTL_EN_MASK, > + NULL, tps68470_ldo_ranges, > + ARRAY_SIZE(tps68470_ldo_ranges)), > + TPS68470_REGULATOR(VCM, TPS68470_VCM, > + tps68470_regulator_ops, 126, TPS68470_REG_VCMVAL, > + TPS68470_VCMVAL_VCVOLT_MASK, TPS68470_REG_VCMCTL, > + TPS68470_VCMCTL_EN_MASK, > + NULL, tps68470_ldo_ranges, > + ARRAY_SIZE(tps68470_ldo_ranges)), > + TPS68470_REGULATOR(VIO, TPS68470_VIO, > + tps68470_regulator_ops, 126, TPS68470_REG_VIOVAL, > + TPS68470_VIOVAL_IOVOLT_MASK, TPS68470_REG_S_I2C_CTL, > + TPS68470_S_I2C_CTL_EN_MASK, > + NULL, tps68470_ldo_ranges, > + ARRAY_SIZE(tps68470_ldo_ranges)), > + > +/* > + * (1) This register must have same setting as VIOVAL if S_IO LDO is used to > + * power daisy chained IOs in the receive side. > + * (2) If there is no I2C daisy chain it can be set freely. > + * > + */ > + TPS68470_REGULATOR(VSIO, TPS68470_VSIO, > + tps68470_regulator_ops, 126, TPS68470_REG_VSIOVAL, > + TPS68470_VSIOVAL_IOVOLT_MASK, TPS68470_REG_S_I2C_CTL, > + TPS68470_S_I2C_CTL_EN_MASK, > + NULL, tps68470_ldo_ranges, > + ARRAY_SIZE(tps68470_ldo_ranges)), > + TPS68470_REGULATOR(AUX1, TPS68470_AUX1, > + tps68470_regulator_ops, 126, TPS68470_REG_VAUX1VAL, > + TPS68470_VAUX1VAL_AUX1VOLT_MASK, > + TPS68470_REG_VAUX1CTL, > + TPS68470_VAUX1CTL_EN_MASK, > + NULL, tps68470_ldo_ranges, > + ARRAY_SIZE(tps68470_ldo_ranges)), > + TPS68470_REGULATOR(AUX2, TPS68470_AUX2, > + tps68470_regulator_ops, 126, TPS68470_REG_VAUX2VAL, > + TPS68470_VAUX2VAL_AUX2VOLT_MASK, > + TPS68470_REG_VAUX2CTL, > + TPS68470_VAUX2CTL_EN_MASK, > + NULL, tps68470_ldo_ranges, > + ARRAY_SIZE(tps68470_ldo_ranges)), > +}; > + > +static int tps68470_regulator_probe(struct platform_device *pdev) > +{ > + struct tps68470_regulator_platform_data *pdata = pdev->dev.platform_data; > + struct tps68470_regulator_data *data; > + struct regulator_config config = { }; > + struct regulator_dev *rdev; > + int i; > + > + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); > + if (!data) > + return -ENOMEM; > + > + data->clk = devm_clk_get(&pdev->dev, "tps68470-clk"); > + if (IS_ERR(data->clk)) { > + dev_err(&pdev->dev, "Error getting tps68470-clk\n"); > + return PTR_ERR(data->clk); > + } > + > + config.dev = pdev->dev.parent; > + config.regmap = dev_get_drvdata(pdev->dev.parent); > + config.driver_data = data; > + > + for (i = 0; i < TPS68470_NUM_REGULATORS; i++) { > + if (pdata) > + config.init_data = pdata->reg_init_data[i]; > + else > + config.init_data = NULL; > + > + rdev = devm_regulator_register(&pdev->dev, ®ulators[i], &config); > + if (IS_ERR(rdev)) { > + dev_err(&pdev->dev, "failed to register %s regulator\n", > + regulators[i].name); > + return PTR_ERR(rdev); > + } > + } > + > + return 0; > +} > + > +static struct platform_driver tps68470_regulator_driver = { > + .driver = { > + .name = "tps68470-regulator", > + }, > + .probe = tps68470_regulator_probe, > +}; > + > +/* > + * The ACPI tps68470 probe-ordering depends on the clk/gpio/regulator drivers > + * registering before the drivers for the camera-sensors which use them bind. > + * subsys_initcall() ensures this when the drivers are builtin. > + */ > +static int __init tps68470_regulator_init(void) > +{ > + return platform_driver_register(&tps68470_regulator_driver); > +} > +subsys_initcall(tps68470_regulator_init); > + > +static void __exit tps68470_regulator_exit(void) > +{ > + platform_driver_unregister(&tps68470_regulator_driver); > +} > +module_exit(tps68470_regulator_exit); > + > +MODULE_ALIAS("platform:tps68470-regulator"); > +MODULE_DESCRIPTION("TPS68470 voltage regulator driver"); > +MODULE_LICENSE("GPL v2"); -- Kind regards, Sakari Ailus
