[PATCH 02/11] media: atomisp-ov2680: Turn on power only once

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add a power_on bool to track if the power is on, and make
power_up() a no-op if the power is already on.

This also removes a power_down() call from ov2680_s_config() since
that is a no-op now, this is ok because s_config() is only called
once on probe and the sensor is off at boot.

Besides avoiding to the work in power_up() multiple times this patch
is also a preparation for switching to the clk and regulator frameworks
which keep an enable count, so there we must call enable() and
disable() only once per power-cycle.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 .../media/atomisp/i2c/atomisp-ov2680.c        | 27 +++++++++----------
 drivers/staging/media/atomisp/i2c/ov2680.h    |  1 +
 2 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
index 56f95e44316d..7b7cf7a68823 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
@@ -736,6 +736,9 @@ static int power_up(struct v4l2_subdev *sd)
 		return -ENODEV;
 	}
 
+	if (dev->power_on)
+		return 0; /* Already on */
+
 	/* power control */
 	ret = power_ctrl(sd, 1);
 	if (ret)
@@ -760,6 +763,7 @@ static int power_up(struct v4l2_subdev *sd)
 	/* according to DS, 20ms is needed between PWDN and i2c access */
 	msleep(20);
 
+	dev->power_on = true;
 	return 0;
 
 fail_clk:
@@ -785,6 +789,9 @@ static int power_down(struct v4l2_subdev *sd)
 		return -ENODEV;
 	}
 
+	if (!dev->power_on)
+		return 0; /* Already off */
+
 	ret = dev->platform_data->flisclk_ctrl(sd, 0);
 	if (ret)
 		dev_err(&client->dev, "flisclk failed\n");
@@ -799,10 +806,13 @@ static int power_down(struct v4l2_subdev *sd)
 
 	/* power control */
 	ret = power_ctrl(sd, 0);
-	if (ret)
+	if (ret) {
 		dev_err(&client->dev, "vprog failed.\n");
+		return ret;
+	}
 
-	return ret;
+	dev->power_on = false;
+	return 0;
 }
 
 static int ov2680_s_power(struct v4l2_subdev *sd, int on)
@@ -866,7 +876,7 @@ static int ov2680_set_fmt(struct v4l2_subdev *sd,
 	dev_dbg(&client->dev, "%s: %dx%d\n",
 		__func__, fmt->width, fmt->height);
 
-	// IS IT NEEDED?
+	/* s_power has not been called yet for std v4l2 clients (camorama) */
 	power_up(sd);
 	ret = ov2680_write_reg_array(client, dev->res->regs);
 	if (ret)
@@ -998,16 +1008,6 @@ static int ov2680_s_config(struct v4l2_subdev *sd,
 	    (struct camera_sensor_platform_data *)platform_data;
 
 	mutex_lock(&dev->input_lock);
-	/*
-	 * power off the module, then power on it in future
-	 * as first power on by board may not fulfill the
-	 * power on sequqence needed by the module
-	 */
-	ret = power_down(sd);
-	if (ret) {
-		dev_err(&client->dev, "ov2680 power-off err.\n");
-		goto fail_power_off;
-	}
 
 	ret = power_up(sd);
 	if (ret) {
@@ -1041,7 +1041,6 @@ static int ov2680_s_config(struct v4l2_subdev *sd,
 fail_power_on:
 	power_down(sd);
 	dev_err(&client->dev, "sensor power-gating failed\n");
-fail_power_off:
 	mutex_unlock(&dev->input_lock);
 	return ret;
 }
diff --git a/drivers/staging/media/atomisp/i2c/ov2680.h b/drivers/staging/media/atomisp/i2c/ov2680.h
index 9f9f6695eed9..edd87bb8563f 100644
--- a/drivers/staging/media/atomisp/i2c/ov2680.h
+++ b/drivers/staging/media/atomisp/i2c/ov2680.h
@@ -173,6 +173,7 @@ struct ov2680_device {
 	struct v4l2_ctrl_handler ctrl_handler;
 	struct ov2680_resolution *res;
 	struct camera_sensor_platform_data *platform_data;
+	bool power_on;
 };
 
 /**
-- 
2.31.1




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux