Valid pixel clock detection is performed by spinning on a register read
which if repeated too frequently might fail. As the error is not fatal
ignore it instead of bailing out to continue spinning until the timeout
completion.
Also relax the time between bus transactions and slightly increase the
wait interval to mitigate the failure risk.
Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
---
v1->v2:
- Do not continue but jump to a label to respect the sleep timout after a
failed read
Niklas I kept your tag anyway, hope it's ok.
Thanks
j
---
drivers/media/i2c/max9271.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/media/i2c/max9271.c b/drivers/media/i2c/max9271.c
index ff86c8c4ea61..aa4add473716 100644
--- a/drivers/media/i2c/max9271.c
+++ b/drivers/media/i2c/max9271.c
@@ -55,7 +55,7 @@ static int max9271_write(struct max9271_device *dev, u8 reg, u8 val)
/*
* max9271_pclk_detect() - Detect valid pixel clock from image sensor
*
- * Wait up to 10ms for a valid pixel clock.
+ * Wait up to 15ms for a valid pixel clock.
*
* Returns 0 for success, < 0 for pixel clock not properly detected
*/
@@ -64,15 +64,16 @@ static int max9271_pclk_detect(struct max9271_device *dev)
unsigned int i;
int ret;
- for (i = 0; i < 100; i++) {
+ for (i = 0; i < 10; i++) {
ret = max9271_read(dev, 0x15);
if (ret < 0)
- return ret;
+ goto skip;
if (ret & MAX9271_PCLKDET)
return 0;
- usleep_range(50, 100);
+skip:
+ usleep_range(1000, 1500);
}
dev_err(&dev->client->dev, "Unable to detect valid pixel clock\n");
--
2.33.1
