Hello all This series extends the ov8865 driver with: * Support for binding to ACPI enumerated devices. * Support for a 19.2MHz clock in addition to existing 24MHz clock support * Another v4l2_subdev_pad_ops callback * 4 more V4L2 controls * makes the driver supported by the cio2-bridge There's also a little bit of tidying that I did along the way. The series is tested on an MS Surface Go 2. Thanks Dan Series changes since V2: - Added a patch changing the HTS values in some modes to be >= the value for output size x - Added a patch re-ordering calls to pm_runtime - Added a patch using dev_err_probe() to avoid error prints when the driver defers probe. Daniel Scally (15): media: i2c: Add ACPI support to ov8865 media: i2c: Fix incorrect value in comment media: i2c: Defer probe if not endpoint found media: i2c: Support 19.2MHz input clock in ov8865 media: i2c: Add .get_selection() support to ov8865 media: i2c: Switch control to V4L2_CID_ANALOGUE_GAIN media: i2c: Add vblank control to ov8865 media: i2c: Add hblank control to ov8865 media: i2c: Update HTS values in ov8865 media: i2c: cap exposure at height + vblank in ov8865 media: i2c: Add controls from fwnode to ov8865 media: i2c: Switch exposure control unit to lines media: i2c: Re-order runtime pm initialisation media: i2c: Use dev_err_probe() in ov8865 media: ipu3-cio2: Add INT347A to cio2-bridge Hans de Goede (1): media: i2c: ov8865: Fix lockdep error drivers/media/i2c/ov8865.c | 459 +++++++++++++++------ drivers/media/pci/intel/ipu3/cio2-bridge.c | 2 + 2 files changed, 327 insertions(+), 134 deletions(-) -- 2.25.1
