[BUG/RFC PATCH 2/5] [BUG][RFC] media: atomisp: pci: remove dummy_ptr NULL check to avoid duplicate active_bo

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is almost a BUG report with a patch to just avoid kernel error
message. Thus, prefixed with [BUG][RFC].

RFC:
  1. Regarding the NULL check in hmm_init(), it was added for the case
     when probe failed [1]. So, need to address that case with the other
     means? But I'm not sure how we can do for the case.
  2. Regarding the WARN_ON() in hmm_free(), there is a patch from Alan
     ("atomisp: hmm gives a bogus warning on unload") [1] but I haven't
     looked into it yet.

[1] https://lore.kernel.org/linux-media/151001141201.77201.10725942741811192730.stgit@alans-desktop/

>8-----------------------------------------------------------------8<

The NULL check for dummy_ptr in hmm_init() [1] results in the following
"hmm_init Failed to create sysfs" error exactly once every
two times on atomisp reload by rmmod/insmod (although atomisp module
loads and works fine regardless of this error):

	kern  :warn  : [  140.230662] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/active_bo'
	kern  :warn  : [  140.230668] CPU: 1 PID: 2502 Comm: insmod Tainted: G         C OE     5.15.0-rc4-1-surface-mainline #1 b8acf6eb64994414b2e20bad312a7a2c45f748f9
	kern  :warn  : [  140.230675] Hardware name: OEMB OEMB/OEMB, BIOS 1.51116.238 03/09/2015
	kern  :warn  : [  140.230678] Call Trace:
	kern  :warn  : [  140.230687]  dump_stack_lvl+0x46/0x5a
	kern  :warn  : [  140.230702]  sysfs_warn_dup.cold+0x17/0x24
	kern  :warn  : [  140.230710]  sysfs_add_file_mode_ns+0x160/0x170
	kern  :warn  : [  140.230717]  internal_create_group+0x126/0x390
	kern  :warn  : [  140.230723]  hmm_init+0x5c/0x70 [atomisp 7a6a680bf400629363d2a6f58fd10e7299678b99]
	kern  :warn  : [  140.230811]  atomisp_pci_probe.cold+0x1136/0x148e [atomisp 7a6a680bf400629363d2a6f58fd10e7299678b99]
	kern  :warn  : [  140.230875]  local_pci_probe+0x45/0x80
	kern  :warn  : [  140.230882]  ? pci_match_device+0xd7/0x130
	kern  :warn  : [  140.230887]  pci_device_probe+0xfa/0x1b0
	kern  :warn  : [  140.230892]  really_probe+0x1f5/0x3f0
	kern  :warn  : [  140.230899]  __driver_probe_device+0xfe/0x180
	kern  :warn  : [  140.230903]  driver_probe_device+0x1e/0x90
	kern  :warn  : [  140.230908]  __driver_attach+0xc0/0x1c0
	kern  :warn  : [  140.230912]  ? __device_attach_driver+0xe0/0xe0
	kern  :warn  : [  140.230915]  ? __device_attach_driver+0xe0/0xe0
	kern  :warn  : [  140.230919]  bus_for_each_dev+0x89/0xd0
	kern  :warn  : [  140.230924]  bus_add_driver+0x12b/0x1e0
	kern  :warn  : [  140.230929]  driver_register+0x8f/0xe0
	kern  :warn  : [  140.230933]  ? 0xffffffffc153f000
	kern  :warn  : [  140.230937]  do_one_initcall+0x57/0x220
	kern  :warn  : [  140.230945]  do_init_module+0x5c/0x260
	kern  :warn  : [  140.230952]  load_module+0x24bd/0x26a0
	kern  :warn  : [  140.230962]  ? __do_sys_finit_module+0xae/0x110
	kern  :warn  : [  140.230966]  __do_sys_finit_module+0xae/0x110
	kern  :warn  : [  140.230972]  do_syscall_64+0x5c/0x80
	kern  :warn  : [  140.230979]  ? syscall_exit_to_user_mode+0x23/0x40
	kern  :warn  : [  140.230983]  ? do_syscall_64+0x69/0x80
	kern  :warn  : [  140.230988]  ? exc_page_fault+0x72/0x170
	kern  :warn  : [  140.230991]  entry_SYSCALL_64_after_hwframe+0x44/0xae
	kern  :warn  : [  140.230997] RIP: 0033:0x7f7fd5d8718d
	kern  :warn  : [  140.231003] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48
	kern  :warn  : [  140.231006] RSP: 002b:00007ffefc25f0e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
	kern  :warn  : [  140.231012] RAX: ffffffffffffffda RBX: 000055ac3edcd7f0 RCX: 00007f7fd5d8718d
	kern  :warn  : [  140.231015] RDX: 0000000000000000 RSI: 000055ac3d723270 RDI: 0000000000000003
	kern  :warn  : [  140.231017] RBP: 0000000000000000 R08: 0000000000000000 R09: 00007f7fd5e52380
	kern  :warn  : [  140.231019] R10: 0000000000000003 R11: 0000000000000246 R12: 000055ac3d723270
	kern  :warn  : [  140.231021] R13: 0000000000000000 R14: 000055ac3edd06e0 R15: 0000000000000000
	kern  :err   : [  140.231038] atomisp-isp2 0000:00:03.0: hmm_init Failed to create sysfs

So, remove the NULL check to always call sysfs_remove_group() and fix
the above error.

At this point, atomisp now gives WARN_ON() in hmm_free() [2] on atomisp
reload by rmmod/insmod. So, also remove it.

[1] added on commit
    d9ab83953fa7 ("media: atomisp: don't cause a warn if probe failed")
[2] added on commit
    b83cc378dfc4 ("atomisp: clean up the hmm init/cleanup indirections")

Signed-off-by: Tsuchiya Yuto <kitakar@xxxxxxxxx>
---
 drivers/staging/media/atomisp/pci/hmm/hmm.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/staging/media/atomisp/pci/hmm/hmm.c b/drivers/staging/media/atomisp/pci/hmm/hmm.c
index 6a5ee4607089..47dc3df3b800 100644
--- a/drivers/staging/media/atomisp/pci/hmm/hmm.c
+++ b/drivers/staging/media/atomisp/pci/hmm/hmm.c
@@ -209,8 +209,6 @@ int hmm_init(void)
 
 void hmm_cleanup(void)
 {
-	if (!dummy_ptr)
-		return;
 	sysfs_remove_group(&atomisp_dev->kobj, atomisp_attribute_group);
 
 	/* free dummy memory first */
@@ -288,8 +286,6 @@ void hmm_free(ia_css_ptr virt)
 
 	dev_dbg(atomisp_dev, "%s: free 0x%08x\n", __func__, virt);
 
-	WARN_ON(!virt);
-
 	bo = hmm_bo_device_search_start(&bo_device, (unsigned int)virt);
 
 	if (!bo) {
-- 
2.33.1




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux