On 05/10/2021 10:57, Tomi Valkeinen wrote:
> From: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
>
> Add documentation for VIDIOC_SUBDEV_G/S_ROUTING ioctl and add
> description of multiplexed media pads and internal routing to the
> V4L2-subdev documentation section.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
> ---
> .../userspace-api/media/v4l/dev-subdev.rst | 2 +
> .../userspace-api/media/v4l/user-func.rst | 1 +
> .../media/v4l/vidioc-subdev-g-routing.rst | 146 ++++++++++++++++++
> 3 files changed, 149 insertions(+)
> create mode 100644 Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst
>
> diff --git a/Documentation/userspace-api/media/v4l/dev-subdev.rst b/Documentation/userspace-api/media/v4l/dev-subdev.rst
> index fd1de0a73a9f..a67c2749089a 100644
> --- a/Documentation/userspace-api/media/v4l/dev-subdev.rst
> +++ b/Documentation/userspace-api/media/v4l/dev-subdev.rst
> @@ -29,6 +29,8 @@ will feature a character device node on which ioctls can be called to
>
> - negotiate image formats on individual pads
>
> +- inspect and modify internal data routing between pads of the same entity
> +
> Sub-device character device nodes, conventionally named
> ``/dev/v4l-subdev*``, use major number 81.
>
> diff --git a/Documentation/userspace-api/media/v4l/user-func.rst b/Documentation/userspace-api/media/v4l/user-func.rst
> index 53e604bd7d60..228c1521f190 100644
> --- a/Documentation/userspace-api/media/v4l/user-func.rst
> +++ b/Documentation/userspace-api/media/v4l/user-func.rst
> @@ -70,6 +70,7 @@ Function Reference
> vidioc-subdev-g-crop
> vidioc-subdev-g-fmt
> vidioc-subdev-g-frame-interval
> + vidioc-subdev-g-routing
> vidioc-subdev-g-selection
> vidioc-subdev-querycap
> vidioc-subscribe-event
> diff --git a/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst
> new file mode 100644
> index 000000000000..41f4873c49f7
> --- /dev/null
> +++ b/Documentation/userspace-api/media/v4l/vidioc-subdev-g-routing.rst
> @@ -0,0 +1,146 @@
> +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
> +.. c:namespace:: V4L
> +
> +.. _VIDIOC_SUBDEV_G_ROUTING:
> +
> +******************************************************
> +ioctl VIDIOC_SUBDEV_G_ROUTING, VIDIOC_SUBDEV_S_ROUTING
> +******************************************************
> +
> +Name
> +====
> +
> +VIDIOC_SUBDEV_G_ROUTING - VIDIOC_SUBDEV_S_ROUTING - Get or set routing between streams of media pads in a media entity.
> +
> +
> +Synopsis
> +========
> +
> +.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_G_ROUTING, struct v4l2_subdev_routing *argp )
> + :name: VIDIOC_SUBDEV_G_ROUTING
> +
> +.. c:function:: int ioctl( int fd, VIDIOC_SUBDEV_S_ROUTING, struct v4l2_subdev_routing *argp )
> + :name: VIDIOC_SUBDEV_S_ROUTING
> +
> +
> +Arguments
> +=========
> +
> +``fd``
> + File descriptor returned by :ref:`open() <func-open>`.
> +
> +``argp``
> + Pointer to struct :c:type:`v4l2_subdev_routing`.
> +
> +
> +Description
> +===========
> +
> +These ioctls are used to get and set the routing in a media entity.
> +The routing configuration determines the flows of data inside an entity.
> +
> +Drivers report their current routing tables using the
> +``VIDIOC_SUBDEV_G_ROUTING`` ioctl and application may enable or disable routes
> +with the VIDIOC_SUBDEV_S_ROUTING ioctl, by adding or removing routes and setting
> +or clearing the ``V4L2_SUBDEV_ROUTE_FL_ACTIVE`` flag of the ``flags`` field of
> +a struct :c:type:`v4l2_subdev_route`.
> +
> +A special case for routing are routes marked with
> +``V4L2_SUBDEV_ROUTE_FL_SOURCE`` flag. These routes are used to describe
> +source endpoints on sensors and the sink fields are unused.
> +
> +When inspecting routes through VIDIOC_SUBDEV_G_ROUTING and the application
> +provided ``num_routes`` is not big enough to contain all the available routes
> +the subdevice exposes, drivers return the ENOSPC error code and adjust the
> +value of the ``num_routes`` field. Application should then reserve enough memory
> +for all the route entries and call VIDIOC_SUBDEV_G_ROUTING again.
> +
> +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
> +
> +.. c:type:: v4l2_subdev_routing
> +
> +.. flat-table:: struct v4l2_subdev_routing
> + :header-rows: 0
> + :stub-columns: 0
> + :widths: 1 1 2
> +
> + * - __u32
> + - ``which``
> + - Format to modified, from enum
> + :ref:`v4l2_subdev_format_whence <v4l2-subdev-format-whence>`.
> + * - struct :c:type:`v4l2_subdev_route`
> + - ``routes[]``
> + - Array of struct :c:type:`v4l2_subdev_route` entries
> + * - __u32
> + - ``num_routes``
> + - Number of entries of the routes array
> + * - __u32
> + - ``reserved``\ [5]
> + - Reserved for future extensions. Applications and drivers must set
> + the array to zero.
> +
> +.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
> +
> +.. c:type:: v4l2_subdev_route
> +
> +.. flat-table:: struct v4l2_subdev_route
> + :header-rows: 0
> + :stub-columns: 0
> + :widths: 1 1 2
> +
> + * - __u32
> + - ``sink_pad``
> + - Sink pad number.
> + * - __u32
> + - ``sink_stream``
> + - Sink pad stream number.
> + * - __u32
> + - ``source_pad``
> + - Source pad number.
> + * - __u32
> + - ``source_stream``
> + - Source pad stream number.
> + * - __u32
> + - ``flags``
> + - Route enable/disable flags
> + :ref:`v4l2_subdev_routing_flags <v4l2-subdev-routing-flags>`.
> + * - __u32
> + - ``reserved``\ [5]
> + - Reserved for future extensions. Applications and drivers must set
> + the array to zero.
> +
> +.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.7cm}|
> +
> +.. _v4l2-subdev-routing-flags:
> +
> +.. flat-table:: enum v4l2_subdev_routing_flags
> + :header-rows: 0
> + :stub-columns: 0
> + :widths: 3 1 4
> +
> + * - V4L2_SUBDEV_ROUTE_FL_ACTIVE
> + - 0
> + - The route is enabled. Set by applications.
> + * - V4L2_SUBDEV_ROUTE_FL_IMMUTABLE
> + - 1
> + - The route is immutable. Set by the driver.
> + * - V4L2_SUBDEV_ROUTE_FL_SOURCE
> + - 2
> + - The route is a source route, and the ``sink_pad`` and ``sink_stream``
> + fields are unused. Set by the driver.
> +
> +Return Value
> +============
> +
> +On success 0 is returned, on error -1 and the ``errno`` variable is set
> +appropriately. The generic error codes are described at the
> +:ref:`Generic Error Codes <gen-errors>` chapter.
> +
> +ENOSPC
> + The number of provided route entries is less than the available ones.
> +
> +EINVAL
> + The sink or source pad identifiers reference a non-existing pad, or reference
> + pads of different types (ie. the sink_pad identifiers refers to a source pad)
> + or the sink or source stream identifiers reference a non-existing stream on
> + the sink or source pad.
>
