[PATCH v5 4/7] media: venus: hfi: Skip AON register programming for V6 1pipe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Dikshita Agarwal <dikshita@xxxxxxxxxxxxxx>

AON register programming is used to set NOC to low power mode
during V6 power off sequence. However AON register memory map
is not applicable to 1pipe, hence skipping AON register programming.

Co-developed-by: Mansur Alisha Shaik <mansur@xxxxxxxxxxxxxx>
Signed-off-by: Mansur Alisha Shaik <mansur@xxxxxxxxxxxxxx>
Co-developed-by: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
Signed-off-by: Vikash Garodia <vgarodia@xxxxxxxxxxxxxx>
Signed-off-by: Dikshita Agarwal <dikshita@xxxxxxxxxxxxxx>
Acked-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
---
 drivers/media/platform/qcom/venus/hfi_venus.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/platform/qcom/venus/hfi_venus.c b/drivers/media/platform/qcom/venus/hfi_venus.c
index ce98c523b3c6..3a75a27632fb 100644
--- a/drivers/media/platform/qcom/venus/hfi_venus.c
+++ b/drivers/media/platform/qcom/venus/hfi_venus.c
@@ -551,6 +551,9 @@ static int venus_halt_axi(struct venus_hfi_device *hdev)
 	if (IS_V6(hdev->core)) {
 		writel(0x3, cpu_cs_base + CPU_CS_X2RPMH_V6);
 
+		if (hdev->core->res->num_vpp_pipes == 1)
+			goto skip_aon_mvp_noc;
+
 		writel(0x1, aon_base + AON_WRAPPER_MVP_NOC_LPI_CONTROL);
 		ret = readl_poll_timeout(aon_base + AON_WRAPPER_MVP_NOC_LPI_STATUS,
 					 val,
@@ -560,6 +563,7 @@ static int venus_halt_axi(struct venus_hfi_device *hdev)
 		if (ret)
 			return -ETIMEDOUT;
 
+skip_aon_mvp_noc:
 		mask_val = (BIT(2) | BIT(1) | BIT(0));
 		writel(mask_val, wrapper_base + WRAPPER_DEBUG_BRIDGE_LPI_CONTROL_V6);
 
-- 
2.25.1




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux