On Thu, Jun 03, 2010 at 03:04:14AM -0300, Mauro Carvalho Chehab wrote: > Em 01-06-2010 17:32, Jarod Wilson escreveu: > > This is a new driver for the Windows Media Center Edition/eHome > > Infrared Remote transceiver devices. Its a port of the current > > lirc_mceusb driver to ir-core, and currently lacks transmit support, > > but will grow it back soon enough... This driver also differs from > > lirc_mceusb in that it borrows heavily from a simplified IR buffer > > decode routine found in Jon Smirl's earlier ir-mceusb port. > > > > This driver has been tested on the original first-generation MCE IR > > device with the MS vendor ID, as well as a current-generation device > > with a Topseed vendor ID. Every receiver supported by lirc_mceusb > > should work equally well. Testing was done primarily with RC6 MCE > > remotes, but also briefly with a Hauppauge RC5 remote, and all works > > as expected. > > > > v2: fix call to ir_raw_event_handle so repeats work as they should. > > The driver seems ok, except for a few "magic" numbers. > > I'll apply at the tree, to allow more people to test. Please send me later > a patch fixing those small issues. I'll get something in flight tonight or tomorrow. All those uglies are in the 1st-gen init code, which needs some further work anyway to kill off a warning about the driver mapping memory from stack. I've got a number of other 1st-gen tx and debug output fixes queued up as well. -- Jarod Wilson jarod@xxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html