From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> [ Upstream commit 51f93add3669f1b1f540de1cf397815afbd4c756 ] The frame_length_lines (0x0340) registers are hard-coded as follows: - 4208x3118 frame_length_lines = 0x0c50 - 2104x1560 frame_length_lines = 0x0638 - 1048x780 frame_length_lines = 0x034c The driver exposes the V4L2_CID_VBLANK control in read-only mode and sets its value to vts_def - height, where vts_def is a mode-dependent value coming from the supported_modes array. It is set using one of the following macros defined in the driver: #define IMX258_VTS_30FPS 0x0c98 #define IMX258_VTS_30FPS_2K 0x0638 #define IMX258_VTS_30FPS_VGA 0x034c There's a clear mismatch in the value for the full resolution mode i.e. IMX258_VTS_30FPS. Fix it by rectifying the macro with the value set for the frame_length_lines register as stated above. Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Signed-off-by: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx> Reviewed-by: Bingbu Cao <bingbu.cao@xxxxxxxxx> Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/media/i2c/imx258.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c index f86ae18bc104..5f5e50c01b12 100644 --- a/drivers/media/i2c/imx258.c +++ b/drivers/media/i2c/imx258.c @@ -22,7 +22,7 @@ #define IMX258_CHIP_ID 0x0258 /* V_TIMING internal */ -#define IMX258_VTS_30FPS 0x0c98 +#define IMX258_VTS_30FPS 0x0c50 #define IMX258_VTS_30FPS_2K 0x0638 #define IMX258_VTS_30FPS_VGA 0x034c #define IMX258_VTS_MAX 0xffff -- 2.30.2
