On Mon, 2010-05-31 at 17:38 +0200, Sedji Gaouaou wrote: > Hi, > > I am currently working on the atmel video driver, and I am facing a issue. > I have written a driver for the ov2640 omnivison sensor(enclosed). In > the ov2640 driver I am using the v4l2_subdev API. The point is I don't > how how can I access it in my video driver? > How to register the subdev struct in the atmel driver, so I could access > the s_ftm function for instance. That depends. Is the atmel video driver instantiating a v4l_device for itself, or is it using some frame work that instantiates one for it? The details of using the v4l2 framework are in linux/Documentation/video4linux/v4l2-framework.txt but, typically 1. Something first should call v4l2_device_register() on a v4l2_device object. (Typically there is only one v4l2_device object per "bridge" chip between the PCI, PCIe, or USB bus and the subdevices, even if that bridge chip has more than one I2C master implementation.) 2. Then, for subdevices connected to the bridge chip via I2C, something needs to call v4l2_i2c_new_subdev() with the v4l2_device pointer as one of the arguments, to get back a v4l2_subdevice instance pointer. 3. After that, v4l2_subdev_call() with the v4l2_subdev pointer as one of the arguments can be used to invoke the subdevice methods. TV Video capture drivers do this work themselves. Drivers using a camera framework may have the framework doing some of the work for them. Regards, Andy -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
