Re: [RFC] Make use of non-dynamic dmabuf in RDMA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 24, 2021 at 10:27:23AM -0700, John Hubbard wrote:
> On 8/24/21 2:32 AM, Christian König wrote:
> > Am 24.08.21 um 11:06 schrieb Gal Pressman:
> > > On 23/08/2021 13:43, Christian König wrote:
> > > > Am 21.08.21 um 11:16 schrieb Gal Pressman:
> > > > > On 20/08/2021 17:32, Jason Gunthorpe wrote:
> > > > > > On Fri, Aug 20, 2021 at 03:58:33PM +0300, Gal Pressman wrote:
> ...
> > > > > IIUC, we're talking about three different exporter "types":
> > > > > - Dynamic with move_notify (requires ODP)
> > > > > - Dynamic with revoke_notify
> > > > > - Static
> > > > > 
> > > > > Which changes do we need to make the third one work?
> > > > Basically none at all in the framework.
> > > > 
> > > > You just need to properly use the dma_buf_pin() function when you start using a
> > > > buffer (e.g. before you create an attachment) and the dma_buf_unpin() function
> > > > after you are done with the DMA-buf.
> > > I replied to your previous mail, but I'll ask again.
> > > Doesn't the pin operation migrate the memory to host memory?
> > 
> > Sorry missed your previous reply.
> > 
> > And yes at least for the amdgpu driver we migrate the memory to host
> > memory as soon as it is pinned and I would expect that other GPU drivers
> > do something similar.
> 
> Well...for many topologies, migrating to host memory will result in a
> dramatically slower p2p setup. For that reason, some GPU drivers may
> want to allow pinning of video memory in some situations.
> 
> Ideally, you've got modern ODP devices and you don't even need to pin.
> But if not, and you still hope to do high performance p2p between a GPU
> and a non-ODP Infiniband device, then you would need to leave the pinned
> memory in vidmem.
> 
> So I think we don't want to rule out that behavior, right? Or is the
> thinking more like, "you're lucky that this old non-ODP setup works at
> all, and we'll make it work by routing through host/cpu memory, but it
> will be slow"?

I think it depends on the user, if the user creates memory which is
permanently located on the GPU then it should be pinnable in this way
without force migration. But if the memory is inherently migratable
then it just cannot be pinned in the GPU at all as we can't
indefinately block migration from happening eg if the CPU touches it
later or something.

Jason



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux