Hi Daniel,
On Mon, Aug 09, 2021 at 11:58:42PM +0100, Daniel Scally wrote:
> Exposure limits depend on the total height; when vblank is altered (and
> thus the total height is altered), change the exposure limits to reflect
> the new cap.
>
> Signed-off-by: Daniel Scally <djrscally@xxxxxxxxx>
> ---
> Changes in v2:
>
> - None
>
> drivers/media/i2c/ov8865.c | 24 ++++++++++++++++++++++--
> 1 file changed, 22 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/i2c/ov8865.c b/drivers/media/i2c/ov8865.c
> index db84294b7a03..70747552e32a 100644
> --- a/drivers/media/i2c/ov8865.c
> +++ b/drivers/media/i2c/ov8865.c
> @@ -675,6 +675,7 @@ struct ov8865_ctrls {
> struct v4l2_ctrl *pixel_rate;
> struct v4l2_ctrl *hblank;
> struct v4l2_ctrl *vblank;
> + struct v4l2_ctrl *exposure;
>
> struct v4l2_ctrl_handler handler;
> };
> @@ -2461,6 +2462,18 @@ static int ov8865_s_ctrl(struct v4l2_ctrl *ctrl)
> unsigned int index;
> int ret;
>
> + /* If VBLANK is altered we need to update exposure to compensate */
> + if (ctrl->id == V4L2_CID_VBLANK) {
> + int exposure_max;
> +
> + exposure_max = sensor->state.mode->output_size_y + ctrl->val;
> + __v4l2_ctrl_modify_range(sensor->ctrls.exposure,
> + sensor->ctrls.exposure->minimum,
> + exposure_max,
> + sensor->ctrls.exposure->step,
> + min(sensor->ctrls.exposure->val, exposure_max));
> + }
> +
> /* Wait for the sensor to be on before setting controls. */
> if (pm_runtime_suspended(sensor->dev))
> return 0;
> @@ -2517,8 +2530,8 @@ static int ov8865_ctrls_init(struct ov8865_sensor *sensor)
>
> /* Exposure */
>
> - v4l2_ctrl_new_std(handler, ops, V4L2_CID_EXPOSURE, 16, 1048575, 16,
> - 512);
> + ctrls->exposure = v4l2_ctrl_new_std(handler, ops, V4L2_CID_EXPOSURE, 16,
> + 1048575, 16, 512);
>
> /* Gain */
>
> @@ -2699,6 +2712,7 @@ static int ov8865_set_fmt(struct v4l2_subdev *subdev,
> u32 mbus_code = 0;
> unsigned int hblank;
> unsigned int index;
> + int exposure_max;
> int ret = 0;
>
> mutex_lock(&sensor->mutex);
> @@ -2746,6 +2760,12 @@ static int ov8865_set_fmt(struct v4l2_subdev *subdev,
> __v4l2_ctrl_modify_range(sensor->ctrls.hblank, hblank, hblank, 1,
> hblank);
>
> + exposure_max = mode->vts;
> + __v4l2_ctrl_modify_range(sensor->ctrls.exposure,
> + sensor->ctrls.exposure->minimum, exposure_max,
> + sensor->ctrls.exposure->step,
> + min(sensor->ctrls.exposure->val, exposure_max));
Please wrap lines over 80 (unless there's a sound reason not to).
> +
> complete:
> mutex_unlock(&sensor->mutex);
>
--
Sakari Ailus
