Re: [PATCH v2 9/9] media: stm32-dma2d: STM32 DMA2D driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Hans

Thanks for the detailed review.
All the suggestions will be addressed at v3.

On Mon, 9 Aug 2021 at 17:09, Hans Verkuil <hverkuil-cisco@xxxxxxxxx> wrote:
>
> On 15/07/2021 11:24, dillon.minfei@xxxxxxxxx wrote:
> > From: Dillon Min <dillon.minfei@xxxxxxxxx>
> >
> > This V4L2 subdev m2m driver enables Chrom-Art Accelerator unit
> > of STMicroelectronics STM32 SoC series.
> >
> > Currently support r2m, m2m, m2m_pfc functions.
> > - r2m, Filling a part or the whole of a destination image with a specific
> >   color.
> > - m2m, Copying a part or the whole of a source image into a part or the
> >   whole of a destination.
> > - m2m_pfc, Copying a part or the whole of a source image into a part or the
> >   whole of a destination image with a pixel format conversion.
> >
> > Signed-off-by: Dillon Min <dillon.minfei@xxxxxxxxx>
> > ---
> > v2: all the changes are based on Hans's review, thanks.
> > - update Kconfig, replace ',' to 'and', add '.' at the description end,
> >   add COMPILE_TEST.
> > - fix a lots of warrnings from checkpatch.pl --strict.
> > - add const to formats[] and def_frame.
> > - chage line_ofs to line_offset.
> > - replace ctx->fg to ctx->cap.
> > - change implemention of get_frame().
> > - move the ioctls definition from the code to stm32-media.h.
> > - change "Set to r2m mode" to "Set R2M Mode".
> > - add decription for r2m, m2m, m2m_pfc.
> >
> >  drivers/media/platform/Kconfig                  |   9 +
> >  drivers/media/platform/Makefile                 |   1 +
> >  drivers/media/platform/stm32/Makefile           |   2 +
> >  drivers/media/platform/stm32/dma2d/dma2d-hw.c   | 143 +++++
> >  drivers/media/platform/stm32/dma2d/dma2d-regs.h | 113 ++++
> >  drivers/media/platform/stm32/dma2d/dma2d.c      | 796 ++++++++++++++++++++++++
> >  drivers/media/platform/stm32/dma2d/dma2d.h      | 136 ++++
> >  7 files changed, 1200 insertions(+)
> >  create mode 100644 drivers/media/platform/stm32/dma2d/dma2d-hw.c
> >  create mode 100644 drivers/media/platform/stm32/dma2d/dma2d-regs.h
> >  create mode 100644 drivers/media/platform/stm32/dma2d/dma2d.c
> >  create mode 100644 drivers/media/platform/stm32/dma2d/dma2d.h
> >
> > diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> > index 157c924686e4..4df18623e4ad 100644
> > --- a/drivers/media/platform/Kconfig
> > +++ b/drivers/media/platform/Kconfig
> > @@ -473,6 +473,15 @@ config VIDEO_STI_DELTA_DRIVER
> >
> >  endif # VIDEO_STI_DELTA
> >
> > +config VIDEO_STM32_DMA2D
> > +     tristate "STM32 Chrom-Art Accelerator (DMA2D)"
> > +     depends on (VIDEO_DEV && VIDEO_V4L2 && ARCH_STM32) || COMPILE_TEST
> > +     select VIDEOBUF2_DMA_CONTIG
> > +     select V4L2_MEM2MEM_DEV
> > +     help
> > +       The STM32 DMA2D is a memory-to-memory engine for pixel conversion
> > +       and specialized DMA dedicated to image manipulation.
> > +
> >  config VIDEO_RENESAS_FDP1
> >       tristate "Renesas Fine Display Processor"
> >       depends on VIDEO_DEV && VIDEO_V4L2
> > diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
> > index 73ce083c2fc6..46f1c05bc576 100644
> > --- a/drivers/media/platform/Makefile
> > +++ b/drivers/media/platform/Makefile
> > @@ -70,6 +70,7 @@ obj-$(CONFIG_VIDEO_ATMEL_ISI)               += atmel/
> >  obj-$(CONFIG_VIDEO_ATMEL_XISC)               += atmel/
> >
> >  obj-$(CONFIG_VIDEO_STM32_DCMI)               += stm32/
> > +obj-$(CONFIG_VIDEO_STM32_DMA2D)              += stm32/
> >
> >  obj-$(CONFIG_VIDEO_MEDIATEK_VPU)     += mtk-vpu/
> >
> > diff --git a/drivers/media/platform/stm32/Makefile b/drivers/media/platform/stm32/Makefile
> > index 48b36db2c2e2..896ef98a73ab 100644
> > --- a/drivers/media/platform/stm32/Makefile
> > +++ b/drivers/media/platform/stm32/Makefile
> > @@ -1,2 +1,4 @@
> >  # SPDX-License-Identifier: GPL-2.0-only
> >  obj-$(CONFIG_VIDEO_STM32_DCMI) += stm32-dcmi.o
> > +stm32-dma2d-objs := dma2d/dma2d.o dma2d/dma2d-hw.o
> > +obj-$(CONFIG_VIDEO_STM32_DMA2D) += stm32-dma2d.o
> > diff --git a/drivers/media/platform/stm32/dma2d/dma2d-hw.c b/drivers/media/platform/stm32/dma2d/dma2d-hw.c
> > new file mode 100644
> > index 000000000000..8c1c664ab13b
> > --- /dev/null
> > +++ b/drivers/media/platform/stm32/dma2d/dma2d-hw.c
> > @@ -0,0 +1,143 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * ST stm32 Chrom-Art - 2D Graphics Accelerator Driver
> > + *
> > + * Copyright (c) 2021 Dillon Min
> > + * Dillon Min, <dillon.minfei@xxxxxxxxx>
> > + *
> > + * based on s5p-g2d
> > + *
> > + * Copyright (c) 2011 Samsung Electronics Co., Ltd.
> > + * Kamil Debski, <k.debski@xxxxxxxxxxx>
> > + */
> > +
> > +#include <linux/io.h>
> > +
> > +#include "dma2d.h"
> > +#include "dma2d-regs.h"
> > +
> > +static inline u32 reg_read(void __iomem *base, u32 reg)
> > +{
> > +     return readl_relaxed(base + reg);
> > +}
> > +
> > +static inline void reg_write(void __iomem *base, u32 reg, u32 val)
> > +{
> > +     writel_relaxed(val, base + reg);
> > +}
> > +
> > +static inline void reg_set(void __iomem *base, u32 reg, u32 mask)
> > +{
> > +     reg_write(base, reg, reg_read(base, reg) | mask);
> > +}
> > +
> > +static inline void reg_clear(void __iomem *base, u32 reg, u32 mask)
> > +{
> > +     reg_write(base, reg, reg_read(base, reg) & ~mask);
> > +}
> > +
> > +static inline void reg_update_bits(void __iomem *base, u32 reg, u32 mask,
> > +                                u32 val)
> > +{
> > +     reg_write(base, reg, (reg_read(base, reg) & ~mask) | val);
> > +}
> > +
> > +void dma2d_start(struct dma2d_dev *d)
> > +{
> > +     reg_update_bits(d->regs, DMA2D_CR_REG, CR_START, CR_START);
> > +}
> > +
> > +u32 dma2d_get_int(struct dma2d_dev *d)
> > +{
> > +     return reg_read(d->regs, DMA2D_ISR_REG);
> > +}
> > +
> > +void dma2d_clear_int(struct dma2d_dev *d)
> > +{
> > +     u32 isr_val = reg_read(d->regs, DMA2D_ISR_REG);
> > +
> > +     reg_write(d->regs, DMA2D_IFCR_REG, isr_val & 0x003f);
> > +}
> > +
> > +void dma2d_config_common(struct dma2d_dev *d, enum dma2d_op_mode op_mode,
> > +                      u16 width, u16 height)
> > +{
> > +     reg_update_bits(d->regs, DMA2D_CR_REG, CR_MODE_MASK,
> > +                     op_mode << CR_MODE_SHIFT);
> > +
> > +     reg_write(d->regs, DMA2D_NLR_REG, (width << 16) | height);
> > +}
> > +
> > +void dma2d_config_out(struct dma2d_dev *d, struct dma2d_frame *frm,
> > +                   dma_addr_t o_addr)
> > +{
> > +     reg_update_bits(d->regs, DMA2D_CR_REG, CR_CEIE, CR_CEIE);
> > +     reg_update_bits(d->regs, DMA2D_CR_REG, CR_CTCIE, CR_CTCIE);
> > +     reg_update_bits(d->regs, DMA2D_CR_REG, CR_CAEIE, CR_CAEIE);
> > +     reg_update_bits(d->regs, DMA2D_CR_REG, CR_TCIE, CR_TCIE);
> > +     reg_update_bits(d->regs, DMA2D_CR_REG, CR_TEIE, CR_TEIE);
> > +
> > +     if (frm->fmt->cmode >= CM_MODE_ARGB8888 &&
> > +         frm->fmt->cmode <= CM_MODE_ARGB4444)
> > +             reg_update_bits(d->regs, DMA2D_OPFCCR_REG, OPFCCR_CM_MASK,
> > +                             frm->fmt->cmode);
> > +
> > +     reg_write(d->regs, DMA2D_OMAR_REG, o_addr);
> > +
> > +     reg_write(d->regs, DMA2D_OCOLR_REG,
> > +               (frm->a_rgb[3] << 24) |
> > +               (frm->a_rgb[2] << 16) |
> > +               (frm->a_rgb[1] << 8) |
> > +               frm->a_rgb[0]);
> > +
> > +     reg_update_bits(d->regs, DMA2D_OOR_REG, OOR_LO_MASK,
> > +                     frm->line_offset & 0x3fff);
> > +}
> > +
> > +void dma2d_config_fg(struct dma2d_dev *d, struct dma2d_frame *frm,
> > +                  dma_addr_t f_addr)
> > +{
> > +     reg_write(d->regs, DMA2D_FGMAR_REG, f_addr);
> > +     reg_update_bits(d->regs, DMA2D_FGOR_REG, FGOR_LO_MASK,
> > +                     frm->line_offset);
> > +
> > +     if (frm->fmt->cmode >= CM_MODE_ARGB8888 &&
> > +         frm->fmt->cmode <= CM_MODE_A4)
> > +             reg_update_bits(d->regs, DMA2D_FGPFCCR_REG, FGPFCCR_CM_MASK,
> > +                             frm->fmt->cmode);
> > +
> > +     reg_update_bits(d->regs, DMA2D_FGPFCCR_REG, FGPFCCR_AM_MASK,
> > +                     (frm->a_mode << 16) & 0x03);
> > +
> > +     reg_update_bits(d->regs, DMA2D_FGPFCCR_REG, FGPFCCR_ALPHA_MASK,
> > +                     frm->a_rgb[3] << 24);
> > +
> > +     reg_write(d->regs, DMA2D_FGCOLR_REG,
> > +               (frm->a_rgb[2] << 16) |
> > +               (frm->a_rgb[1] << 8) |
> > +               frm->a_rgb[0]);
> > +}
> > +
> > +void dma2d_config_bg(struct dma2d_dev *d, struct dma2d_frame *frm,
> > +                  dma_addr_t b_addr)
> > +{
> > +     reg_write(d->regs, DMA2D_BGMAR_REG, b_addr);
> > +     reg_update_bits(d->regs, DMA2D_BGOR_REG, BGOR_LO_MASK,
> > +                     frm->line_offset);
> > +
> > +     if (frm->fmt->cmode >= CM_MODE_ARGB8888 &&
> > +         frm->fmt->cmode <= CM_MODE_A4)
> > +             reg_update_bits(d->regs, DMA2D_BGPFCCR_REG, BGPFCCR_CM_MASK,
> > +                             frm->fmt->cmode);
> > +
> > +     reg_update_bits(d->regs, DMA2D_BGPFCCR_REG, BGPFCCR_AM_MASK,
> > +                     (frm->a_mode << 16) & 0x03);
> > +
> > +     reg_update_bits(d->regs, DMA2D_BGPFCCR_REG, BGPFCCR_ALPHA_MASK,
> > +                     frm->a_rgb[3] << 24);
> > +
> > +     reg_write(d->regs, DMA2D_BGCOLR_REG,
> > +               (frm->a_rgb[2] << 16) |
> > +               (frm->a_rgb[1] << 8) |
> > +               frm->a_rgb[0]);
> > +}
> > diff --git a/drivers/media/platform/stm32/dma2d/dma2d-regs.h b/drivers/media/platform/stm32/dma2d/dma2d-regs.h
> > new file mode 100644
> > index 000000000000..2128364406c8
> > --- /dev/null
> > +++ b/drivers/media/platform/stm32/dma2d/dma2d-regs.h
> > @@ -0,0 +1,113 @@
> > +/* SPDX-License-Identifier: GPL-2.0-or-later */
> > +/*
> > + * ST stm32 Chrom-Art - 2D Graphics Accelerator Driver
> > + *
> > + * Copyright (c) 2021 Dillon Min
> > + * Dillon Min, <dillon.minfei@xxxxxxxxx>
> > + *
> > + * based on s5p-g2d
> > + *
> > + * Copyright (c) 2011 Samsung Electronics Co., Ltd.
> > + * Kamil Debski, <k.debski@xxxxxxxxxxx>
> > + */
> > +
> > +#ifndef __DMA2D_REGS_H__
> > +#define __DMA2D_REGS_H__
> > +
> > +#define DMA2D_CR_REG         0x0000
> > +#define CR_MODE_MASK         GENMASK(17, 16)
> > +#define CR_MODE_SHIFT                16
> > +#define CR_M2M                       0x0000
> > +#define CR_M2M_PFC           BIT(16)
> > +#define CR_M2M_BLEND         BIT(17)
> > +#define CR_R2M                       (BIT(17) | BIT(16))
> > +#define CR_CEIE                      BIT(13)
> > +#define CR_CTCIE             BIT(12)
> > +#define CR_CAEIE             BIT(11)
> > +#define CR_TWIE                      BIT(10)
> > +#define CR_TCIE                      BIT(9)
> > +#define CR_TEIE                      BIT(8)
> > +#define CR_ABORT             BIT(2)
> > +#define CR_SUSP                      BIT(1)
> > +#define CR_START             BIT(0)
> > +
> > +#define DMA2D_ISR_REG                0x0004
> > +#define ISR_CEIF             BIT(5)
> > +#define ISR_CTCIF            BIT(4)
> > +#define ISR_CAEIF            BIT(3)
> > +#define ISR_TWIF             BIT(2)
> > +#define ISR_TCIF             BIT(1)
> > +#define ISR_TEIF             BIT(0)
> > +
> > +#define DMA2D_IFCR_REG               0x0008
> > +#define IFCR_CCEIF           BIT(5)
> > +#define IFCR_CCTCIF          BIT(4)
> > +#define IFCR_CAECIF          BIT(3)
> > +#define IFCR_CTWIF           BIT(2)
> > +#define IFCR_CTCIF           BIT(1)
> > +#define IFCR_CTEIF           BIT(0)
> > +
> > +#define DMA2D_FGMAR_REG              0x000c
> > +#define DMA2D_FGOR_REG               0x0010
> > +#define FGOR_LO_MASK         GENMASK(13, 0)
> > +
> > +#define DMA2D_BGMAR_REG              0x0014
> > +#define DMA2D_BGOR_REG               0x0018
> > +#define BGOR_LO_MASK         GENMASK(13, 0)
> > +
> > +#define DMA2D_FGPFCCR_REG    0x001c
> > +#define FGPFCCR_ALPHA_MASK   GENMASK(31, 24)
> > +#define FGPFCCR_AM_MASK              GENMASK(17, 16)
> > +#define FGPFCCR_CS_MASK              GENMASK(15, 8)
> > +#define FGPFCCR_START                BIT(5)
> > +#define FGPFCCR_CCM_RGB888   BIT(4)
> > +#define FGPFCCR_CM_MASK              GENMASK(3, 0)
> > +
> > +#define DMA2D_FGCOLR_REG     0x0020
> > +#define FGCOLR_REG_MASK              GENMASK(23, 16)
> > +#define FGCOLR_GREEN_MASK    GENMASK(15, 8)
> > +#define FGCOLR_BLUE_MASK     GENMASK(7, 0)
> > +
> > +#define DMA2D_BGPFCCR_REG    0x0024
> > +#define BGPFCCR_ALPHA_MASK   GENMASK(31, 24)
> > +#define BGPFCCR_AM_MASK              GENMASK(17, 16)
> > +#define BGPFCCR_CS_MASK              GENMASK(15, 8)
> > +#define BGPFCCR_START                BIT(5)
> > +#define BGPFCCR_CCM_RGB888   BIT(4)
> > +#define BGPFCCR_CM_MASK              GENMASK(3, 0)
> > +
> > +#define DMA2D_BGCOLR_REG     0x0028
> > +#define BGCOLR_REG_MASK              GENMASK(23, 16)
> > +#define BGCOLR_GREEN_MASK    GENMASK(15, 8)
> > +#define BGCOLR_BLUE_MASK     GENMASK(7, 0)
> > +
> > +#define DMA2D_OPFCCR_REG     0x0034
> > +#define OPFCCR_CM_MASK               GENMASK(2, 0)
> > +
> > +#define DMA2D_OCOLR_REG              0x0038
> > +#define OCOLR_ALPHA_MASK     GENMASK(31, 24)
> > +#define OCOLR_RED_MASK               GENMASK(23, 16)
> > +#define OCOLR_GREEN_MASK     GENMASK(15, 8)
> > +#define OCOLR_BLUE_MASK              GENMASK(7, 0)
> > +
> > +#define DMA2D_OMAR_REG               0x003c
> > +
> > +#define DMA2D_OOR_REG                0x0040
> > +#define OOR_LO_MASK          GENMASK(13, 0)
> > +
> > +#define DMA2D_NLR_REG                0x0044
> > +#define NLR_PL_MASK          GENMASK(29, 16)
> > +#define NLR_NL_MASK          GENMASK(15, 0)
> > +
> > +/* Hardware limits */
> > +#define MAX_WIDTH            0x3fff
> > +#define MAX_HEIGHT           0xffff
> > +
> > +#define DEFAULT_WIDTH                240
> > +#define DEFAULT_HEIGHT               320
> > +#define DEFAULT_SIZE         307200
> > +
> > +#define CM_MODE_ARGB8888     0x00
> > +#define CM_MODE_ARGB4444     0x04
> > +#define CM_MODE_A4           0x0a
> > +#endif /* __DMA2D_REGS_H__ */
> > diff --git a/drivers/media/platform/stm32/dma2d/dma2d.c b/drivers/media/platform/stm32/dma2d/dma2d.c
> > new file mode 100644
> > index 000000000000..f41f94dfb7b7
> > --- /dev/null
> > +++ b/drivers/media/platform/stm32/dma2d/dma2d.c
> > @@ -0,0 +1,796 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * STM32 DMA2D - 2D Graphics Accelerator Driver
> > + *
> > + * Copyright (c) 2021 Dillon Min
> > + * Dillon Min, <dillon.minfei@xxxxxxxxx>
> > + *
> > + * based on s5p-g2d
> > + *
> > + * Copyright (c) 2011 Samsung Electronics Co., Ltd.
> > + * Kamil Debski, <k.debski@xxxxxxxxxxx>
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/fs.h>
> > +#include <linux/timer.h>
> > +#include <linux/sched.h>
> > +#include <linux/slab.h>
> > +#include <linux/clk.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/of.h>
> > +
> > +#include <linux/platform_device.h>
> > +#include <media/v4l2-mem2mem.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/v4l2-ioctl.h>
> > +#include <media/v4l2-event.h>
> > +#include <media/videobuf2-v4l2.h>
> > +#include <media/videobuf2-dma-contig.h>
> > +#include <uapi/linux/stm32-media.h>
> > +
> > +#include "dma2d.h"
> > +#include "dma2d-regs.h"
> > +
> > +/*
> > + * This V4L2 subdev m2m driver enables Chrom-Art Accelerator unit
> > + * of STMicroelectronics STM32 SoC series.
> > + *
> > + * Currently support r2m, m2m, m2m_pfc.
> > + *
> > + * - r2m, Filling a part or the whole of a destination image with a specific
> > + *   color.
> > + * - m2m, Copying a part or the whole of a source image into a part or the
> > + *   whole of a destination.
> > + * - m2m_pfc, Copying a part or the whole of a source image into a part or the
> > + *   whole of a destination image with a pixel format conversion.
> > + */
> > +
> > +#define fh2ctx(__fh) container_of(__fh, struct dma2d_ctx, fh)
> > +
> > +static const struct dma2d_fmt formats[] = {
> > +     {
> > +             .fourcc = V4L2_PIX_FMT_ARGB32,
> > +             .cmode = DMA2D_CMODE_ARGB8888,
> > +             .depth = 32,
> > +     },
> > +     {
> > +             .fourcc = V4L2_PIX_FMT_RGB24,
> > +             .cmode = DMA2D_CMODE_RGB888,
> > +             .depth = 24,
> > +     },
> > +     {
> > +             .fourcc = V4L2_PIX_FMT_RGB565,
> > +             .cmode = DMA2D_CMODE_RGB565,
> > +             .depth = 16,
> > +     },
> > +     {
> > +             .fourcc = V4L2_PIX_FMT_ARGB555,
> > +             .cmode = DMA2D_CMODE_ARGB1555,
> > +             .depth = 16,
> > +     },
> > +     {
> > +             .fourcc = V4L2_PIX_FMT_ARGB444,
> > +             .cmode = DMA2D_CMODE_ARGB4444,
> > +             .depth = 16,
> > +     },
> > +};
> > +
> > +#define NUM_FORMATS ARRAY_SIZE(formats)
> > +
> > +static const struct dma2d_frame def_frame = {
> > +     .width          = DEFAULT_WIDTH,
> > +     .height         = DEFAULT_HEIGHT,
> > +     .line_offset    = 0,
> > +     .a_rgb          = {0x00, 0x00, 0x00, 0xff},
> > +     .a_mode         = DMA2D_ALPHA_MODE_NO_MODIF,
> > +     .fmt            = (struct dma2d_fmt *)&formats[0],
> > +     .size           = DEFAULT_SIZE,
> > +};
> > +
> > +static struct dma2d_fmt *find_fmt(int pixelformat)
> > +{
> > +     unsigned int i;
> > +
> > +     for (i = 0; i < NUM_FORMATS; i++) {
> > +             if (formats[i].fourcc == pixelformat)
> > +                     return (struct dma2d_fmt *)&formats[i];
> > +     }
> > +
> > +     return NULL;
> > +}
> > +
> > +static struct dma2d_frame *get_frame(struct dma2d_ctx *ctx,
> > +                                  enum v4l2_buf_type type)
> > +{
> > +     return V4L2_TYPE_IS_OUTPUT(type) ? &ctx->cap : &ctx->out;
> > +}
> > +
> > +static int dma2d_queue_setup(struct vb2_queue *vq,
> > +                          unsigned int *nbuffers, unsigned int *nplanes,
> > +                          unsigned int sizes[], struct device *alloc_devs[])
> > +{
> > +     struct dma2d_ctx *ctx = vb2_get_drv_priv(vq);
> > +     struct dma2d_frame *f = get_frame(ctx, vq->type);
> > +
> > +     if (IS_ERR(f))
> > +             return PTR_ERR(f);
>
> Why this check? get_frame() doesn't return an error pointer, it always succeeds.
> Just drop this.

OK, will remove all the checks on get_frame() from this driver.

>
> > +
> > +     if (*nplanes)
> > +             return sizes[0] < f->size ? -EINVAL : 0;
> > +
> > +     sizes[0] = f->size;
> > +     *nplanes = 1;
> > +
> > +     if (*nbuffers == 0)
> > +             *nbuffers = 1;
>
> *nbuffers can never be 0, so you can drop this check.

OK

>
> > +
> > +     return 0;
> > +}
> > +
> > +static int dma2d_buf_out_validate(struct vb2_buffer *vb)
> > +{
> > +     struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> > +
> > +     if (vbuf->field == V4L2_FIELD_ANY)
> > +             vbuf->field = V4L2_FIELD_NONE;
> > +     if (vbuf->field != V4L2_FIELD_NONE)
> > +             return -EINVAL;
> > +
> > +     return 0;
> > +}
> > +
> > +static int dma2d_buf_prepare(struct vb2_buffer *vb)
> > +{
> > +     struct dma2d_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> > +     struct dma2d_frame *f = get_frame(ctx, vb->vb2_queue->type);
> > +
> > +     if (IS_ERR(f))
> > +             return PTR_ERR(f);
>
> Drop this check.

OK

>
> > +
> > +     if (vb2_plane_size(vb, 0) < f->size)
> > +             return -EINVAL;
> > +
> > +     vb2_set_plane_payload(vb, 0, f->size);
> > +
> > +     return 0;
> > +}
> > +
> > +static void dma2d_buf_queue(struct vb2_buffer *vb)
> > +{
> > +     struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> > +     struct dma2d_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> > +
> > +     v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf);
> > +}
> > +
> > +static int dma2d_start_streaming(struct vb2_queue *q, unsigned int count)
> > +{
> > +     struct dma2d_ctx *ctx = vb2_get_drv_priv(q);
> > +     struct dma2d_frame *f = get_frame(ctx, q->type);
> > +
> > +     if (IS_ERR(f))
> > +             return -EINVAL;
>
> Drop check.

OK

>
> > +
> > +     f->sequence = 0;
> > +     return 0;
> > +}
> > +
> > +static void dma2d_stop_streaming(struct vb2_queue *q)
> > +{
> > +     struct dma2d_ctx *ctx = vb2_get_drv_priv(q);
> > +     struct vb2_v4l2_buffer *vbuf;
> > +
> > +     for (;;) {
> > +             if (V4L2_TYPE_IS_OUTPUT(q->type))
> > +                     vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
> > +             else
> > +                     vbuf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
> > +             if (!vbuf)
> > +                     return;
> > +             v4l2_m2m_buf_done(vbuf, VB2_BUF_STATE_ERROR);
> > +     }
> > +}
> > +
> > +static const struct vb2_ops dma2d_qops = {
> > +     .queue_setup    = dma2d_queue_setup,
> > +     .buf_out_validate        = dma2d_buf_out_validate,
> > +     .buf_prepare    = dma2d_buf_prepare,
> > +     .buf_queue      = dma2d_buf_queue,
> > +     .start_streaming = dma2d_start_streaming,
> > +     .stop_streaming  = dma2d_stop_streaming,
> > +     .wait_prepare   = vb2_ops_wait_prepare,
> > +     .wait_finish    = vb2_ops_wait_finish,
> > +};
> > +
> > +static int queue_init(void *priv, struct vb2_queue *src_vq,
> > +                   struct vb2_queue *dst_vq)
> > +{
> > +     struct dma2d_ctx *ctx = priv;
> > +     int ret;
> > +
> > +     src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
> > +     src_vq->io_modes = VB2_MMAP | VB2_DMABUF;
> > +     src_vq->drv_priv = ctx;
> > +     src_vq->ops = &dma2d_qops;
> > +     src_vq->mem_ops = &vb2_dma_contig_memops;
> > +     src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
> > +     src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
> > +     src_vq->lock = &ctx->dev->mutex;
> > +     src_vq->dev = ctx->dev->v4l2_dev.dev;
> > +
> > +     ret = vb2_queue_init(src_vq);
> > +     if (ret)
> > +             return ret;
> > +
> > +     dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> > +     dst_vq->io_modes = VB2_MMAP | VB2_DMABUF;
> > +     dst_vq->drv_priv = ctx;
> > +     dst_vq->ops = &dma2d_qops;
> > +     dst_vq->mem_ops = &vb2_dma_contig_memops;
> > +     dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
> > +     dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
> > +     dst_vq->lock = &ctx->dev->mutex;
> > +     dst_vq->dev = ctx->dev->v4l2_dev.dev;
> > +
> > +     return vb2_queue_init(dst_vq);
> > +}
> > +
> > +static int dma2d_s_ctrl(struct v4l2_ctrl *ctrl)
> > +{
> > +     struct dma2d_frame *frm;
> > +     struct dma2d_ctx *ctx = container_of(ctrl->handler, struct dma2d_ctx,
> > +                                                             ctrl_handler);
> > +     unsigned long flags;
> > +
> > +     spin_lock_irqsave(&ctx->dev->ctrl_lock, flags);
> > +     switch (ctrl->id) {
> > +     case V4L2_CID_ALPHA_COMPONENT:
> > +             /* set the background alpha value*/
> > +             ctx->alpha_component = (u8)ctrl->val;
>
> It's set here, but is never used?!

It's used in mem2mem-pfc-blend mode, as the blending part is not ready
now, so this can be simply removed at this stage.

I'll remove it at v3, add it back in case the m2m-pfc-blend function is ready.

>
> > +             break;
> > +     case V4L2_CID_DMA2D_R2M_COLOR:
> > +             frm = get_frame(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
> > +             frm->a_rgb[2] = (ctrl->val >> 16) & 0xff;
> > +             frm->a_rgb[1] = (ctrl->val >>  8) & 0xff;
> > +             frm->a_rgb[0] = ctrl->val & 0xff;
>
> Hmm, the alpha value isn't copied, but that's documented in V4L2_CID_DMA2D_R2M_COLOR.
> Either this code or the documentation is wrong.

Yes, the description is confusing. The first time I write this code, I
plan to use the heigh 31..24 bits for the dma2d alpha channel of
output color register (DMA2D_OCLOR), which will be used for
mem2mem-pfc-blend mode.

DMA2D output color register (DMA2D_OCOLR)
Bits 31:24 ALPHA[7: 0]: Alpha Channel Value
These bits define the alpha channel of the output color. These bits
can only be written
when data transfers are disabled. Once the transfer has started, they
are read-only.

Since you give a more common way for it, I will drop
V4L2_CID_DMA2D_R2M_COLOR in v3.
turn to use V4L2_CID_COLORFX and V4L2_CID_COLORFX_ARGB.

>
> > +             break;
> > +     case V4L2_CID_DMA2D_R2M_MODE:
> > +             if (ctrl->val)
> > +                     ctx->op_mode = DMA2D_MODE_R2M;
> > +             break;
> > +     default:
> > +             v4l2_err(&ctx->dev->v4l2_dev, "Invalid control\n");
> > +             spin_unlock_irqrestore(&ctx->dev->ctrl_lock, flags);
> > +             return -EINVAL;
> > +     }
> > +     spin_unlock_irqrestore(&ctx->dev->ctrl_lock, flags);
> > +
> > +     return 0;
> > +}
> > +
> > +static const struct v4l2_ctrl_ops dma2d_ctrl_ops = {
> > +     .s_ctrl = dma2d_s_ctrl,
> > +};
> > +
> > +static const struct v4l2_ctrl_config dma2d_r2m_control[] = {
> > +     {
> > +     .ops = &dma2d_ctrl_ops,
> > +     .id = V4L2_CID_DMA2D_R2M_COLOR,
> > +     .name = "R2M Alpha/Color Value",
>
> This mentions alpha support as well. Very unclear how this relates to V4L2_CID_ALPHA_COMPONENT.

This V4L2_CID_DMA2D_R2M_COLOR will be removed in v3.
DMA2D controller has three place related to alpha component for
blending function, which is

DMA2D foreground PFC control register (DMA2D_FGPFCCR)
DMA2D background PFC control register (DMA2D_BGPFCCR)
DMA2D output color register (DMA2D_OCOLR)

for FGPFCCR, BGPFCCR, they can use alpha value setting from user-space
to replace the original background/foreground image alpha channel
value.
for OCOLR, it's used to define the output pfc result alpha channel.

So, I plan to use
V4L2_CID_ALPHA_COMPONENT for BGPFCCR.
fmt.win.global_alpha for FGPFCCR
V4L2_CID_DMA2D_R2M_COLOR high 8 bits for OCOLR.

I'm still not clear about how to add the overlay function to a mem2mem
device driver.  so all the code related to the alpha/blend part will
be removed at v3.

>
> > +     .type = V4L2_CTRL_TYPE_INTEGER,
> > +     .min = 0xffffffff80000000ULL,
> > +     .max = 0x7fffffff,
>
> I suggest using TYPE_BITMASK: it's more appropriate for a control like this.
> (Yes, there are other color controls that are of type integer, but they predate
> the introduction of type bitmask).

OK, I will use TYPE_BITMASK in v3, thanks for the suggestion.

>
> > +     .def = 0,
> > +     .step = 1,
> > +     },
> > +     {
> > +     .ops = &dma2d_ctrl_ops,
> > +     .id = V4L2_CID_DMA2D_R2M_MODE,
> > +     .name = "Set R2M Mode",
> > +     .type = V4L2_CTRL_TYPE_BOOLEAN,
> > +     .min = 0,
> > +     .max = 1,
> > +     .def = 0,
> > +     .step = 1,
> > +     }
> > +};
>
> It's not clear what R2M mode does. Is it just to enable filling the colors? Or will
> there be other features in the future?

Yes, R2M means register to memory, fill the colors at the assigned
address of memory.
this ctrl just lets the driver know which mode to activate.

drivers can decide to activate below modes at device_run():
- register2mem, this is active by user-space ioctl setting before stream on.
- mem2mem, capture has all the same property with output, just address
different.
  Actually, this is something like normal dma.
- mem2mem-pfc, capture has the different fourcc property with output.
- mem2mem-pfc-blend, not ready now.

>
> As it is now, this feature can instead be implemented by adding a new color effect
> (see V4L2_CID_COLORFX): V4L2_COLORFX_SET_COLOR_ARGB.
>
> And add a new bitmask control V4L2_CID_COLORFX_ARGB to set the ARGB value.

Good idea, will follow your suggestion at v3. thanks.

>
> > +
> > +static int dma2d_setup_ctrls(struct dma2d_ctx *ctx)
> > +{
> > +     v4l2_ctrl_handler_init(&ctx->ctrl_handler, 3);
> > +
> > +     v4l2_ctrl_new_std(&ctx->ctrl_handler, &dma2d_ctrl_ops,
> > +                       V4L2_CID_ALPHA_COMPONENT, 0, 255, 1, 255);
> > +     v4l2_ctrl_new_custom(&ctx->ctrl_handler, &dma2d_r2m_control[0], NULL);
> > +     v4l2_ctrl_new_custom(&ctx->ctrl_handler, &dma2d_r2m_control[1], NULL);
> > +
> > +     return 0;
> > +}
> > +
> > +static int dma2d_open(struct file *file)
> > +{
> > +     struct dma2d_dev *dev = video_drvdata(file);
> > +     struct dma2d_ctx *ctx = NULL;
> > +     int ret = 0;
> > +
> > +     ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
> > +     if (!ctx)
> > +             return -ENOMEM;
> > +     ctx->dev = dev;
> > +     /* Set default formats */
> > +     ctx->cap                = def_frame;
> > +     ctx->bg         = def_frame;
> > +     ctx->out        = def_frame;
> > +     ctx->op_mode    = DMA2D_MODE_M2M_FPC;
> > +     ctx->colorspace = V4L2_COLORSPACE_REC709;
> > +     ctx->alpha_component = 0x00;
> > +     if (mutex_lock_interruptible(&dev->mutex)) {
> > +             kfree(ctx);
> > +             return -ERESTARTSYS;
> > +     }
> > +
> > +     ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx, &queue_init);
> > +     if (IS_ERR(ctx->fh.m2m_ctx)) {
> > +             ret = PTR_ERR(ctx->fh.m2m_ctx);
> > +             mutex_unlock(&dev->mutex);
> > +             kfree(ctx);
> > +             return ret;
> > +     }
> > +
> > +     v4l2_fh_init(&ctx->fh, video_devdata(file));
> > +     file->private_data = &ctx->fh;
> > +     v4l2_fh_add(&ctx->fh);
> > +
> > +     dma2d_setup_ctrls(ctx);
> > +
> > +     /* Write the default values to the ctx struct */
> > +     v4l2_ctrl_handler_setup(&ctx->ctrl_handler);
> > +
> > +     ctx->fh.ctrl_handler = &ctx->ctrl_handler;
> > +     mutex_unlock(&dev->mutex);
> > +
> > +     return 0;
> > +}
> > +
> > +static int dma2d_release(struct file *file)
> > +{
> > +     struct dma2d_dev *dev = video_drvdata(file);
> > +     struct dma2d_ctx *ctx = fh2ctx(file->private_data);
> > +
> > +     v4l2_ctrl_handler_free(&ctx->ctrl_handler);
> > +     v4l2_fh_del(&ctx->fh);
> > +     v4l2_fh_exit(&ctx->fh);
> > +     mutex_lock(&dev->mutex);
> > +     v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
> > +     mutex_unlock(&dev->mutex);
> > +     kfree(ctx);
> > +
> > +     return 0;
> > +}
> > +
> > +static int vidioc_querycap(struct file *file, void *priv,
> > +                        struct v4l2_capability *cap)
> > +{
> > +     strscpy(cap->driver, DMA2D_NAME, sizeof(cap->driver));
> > +     strscpy(cap->card, DMA2D_NAME, sizeof(cap->card));
> > +     strscpy(cap->bus_info, BUS_INFO, sizeof(cap->bus_info));
> > +
> > +     return 0;
> > +}
> > +
> > +static int vidioc_enum_fmt(struct file *file, void *prv, struct v4l2_fmtdesc *f)
> > +{
> > +     if (f->index >= NUM_FORMATS)
> > +             return -EINVAL;
> > +
> > +     f->pixelformat = formats[f->index].fourcc;
> > +     return 0;
> > +}
> > +
> > +static int vidioc_g_fmt(struct file *file, void *prv, struct v4l2_format *f)
> > +{
> > +     struct dma2d_ctx *ctx = prv;
> > +     struct vb2_queue *vq;
> > +     struct dma2d_frame *frm;
> > +
> > +     vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
> > +     if (!vq)
> > +             return -EINVAL;
> > +
> > +     frm = get_frame(ctx, f->type);
> > +     if (IS_ERR(frm))
> > +             return PTR_ERR(frm);
> > +
> > +     f->fmt.pix.width                = frm->width;
> > +     f->fmt.pix.height               = frm->height;
> > +     f->fmt.pix.field                = V4L2_FIELD_NONE;
> > +     f->fmt.pix.pixelformat          = frm->fmt->fourcc;
> > +     f->fmt.pix.bytesperline         = (frm->width * frm->fmt->depth) >> 3;
> > +     f->fmt.pix.sizeimage            = frm->size;
> > +     f->fmt.pix.colorspace           = ctx->colorspace;
> > +     f->fmt.pix.xfer_func            = ctx->xfer_func;
> > +     f->fmt.pix.ycbcr_enc            = ctx->ycbcr_enc;
> > +     f->fmt.pix.quantization         = ctx->quant;
> > +
> > +     return 0;
> > +}
> > +
> > +static int vidioc_try_fmt(struct file *file, void *prv, struct v4l2_format *f)
> > +{
> > +     struct dma2d_ctx *ctx = prv;
> > +     struct dma2d_dev *dev = ctx->dev;
> > +     struct dma2d_fmt *fmt;
> > +     enum v4l2_field *field;
> > +     u32 fourcc = f->fmt.pix.pixelformat;
> > +
> > +     fmt = find_fmt(fourcc);
> > +     if (!fmt) {
> > +             v4l2_warn(&dev->v4l2_dev,
> > +                       "Format not supported: %c%c%c%c, use the default.\n",
> > +                       (fourcc & 0xff),  (fourcc >>  8) & 0xff,
> > +                       (fourcc >> 16) & 0xff, (fourcc >> 24) & 0xff);
> > +             f->fmt.pix.pixelformat = formats[0].fourcc;
> > +             fmt = find_fmt(f->fmt.pix.pixelformat);
> > +     }
> > +
> > +     field = &f->fmt.pix.field;
> > +     if (*field == V4L2_FIELD_ANY)
> > +             *field = V4L2_FIELD_NONE;
> > +     else if (*field != V4L2_FIELD_NONE)
> > +             return -EINVAL;
> > +
> > +     if (f->fmt.pix.width > MAX_WIDTH)
> > +             f->fmt.pix.width = MAX_WIDTH;
> > +     if (f->fmt.pix.height > MAX_HEIGHT)
> > +             f->fmt.pix.height = MAX_HEIGHT;
> > +
> > +     if (f->fmt.pix.width < 1)
> > +             f->fmt.pix.width = 1;
> > +     if (f->fmt.pix.height < 1)
> > +             f->fmt.pix.height = 1;
> > +
> > +     if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT && !f->fmt.pix.colorspace) {
> > +             f->fmt.pix.colorspace = V4L2_COLORSPACE_REC709;
> > +     } else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
> > +             f->fmt.pix.colorspace   = ctx->colorspace;
> > +             f->fmt.pix.xfer_func = ctx->xfer_func;
> > +             f->fmt.pix.ycbcr_enc = ctx->ycbcr_enc;
> > +             f->fmt.pix.quantization = ctx->quant;
> > +     }
> > +     f->fmt.pix.bytesperline = (f->fmt.pix.width * fmt->depth) >> 3;
> > +     f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
> > +
> > +     return 0;
> > +}
> > +
> > +static int vidioc_s_fmt(struct file *file, void *prv, struct v4l2_format *f)
> > +{
> > +     struct dma2d_ctx *ctx = prv;
> > +     struct dma2d_dev *dev = ctx->dev;
> > +     struct vb2_queue *vq;
> > +     struct dma2d_frame *frm;
> > +     struct dma2d_fmt *fmt;
> > +     int ret = 0;
> > +
> > +     /* Adjust all values accordingly to the hardware capabilities
> > +      * and chosen format.
> > +      */
> > +     ret = vidioc_try_fmt(file, prv, f);
> > +     if (ret)
> > +             return ret;
> > +
> > +     vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
> > +     if (vb2_is_busy(vq)) {
> > +             v4l2_err(&dev->v4l2_dev, "queue (%d) bust\n", f->type);
> > +             return -EBUSY;
> > +     }
> > +
> > +     frm = get_frame(ctx, f->type);
> > +     if (IS_ERR(frm))
> > +             return PTR_ERR(frm);
> > +
> > +     fmt = find_fmt(f->fmt.pix.pixelformat);
> > +     if (!fmt)
> > +             return -EINVAL;
> > +
> > +     if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) {
> > +             ctx->colorspace = f->fmt.pix.colorspace;
> > +             ctx->xfer_func = f->fmt.pix.xfer_func;
> > +             ctx->ycbcr_enc = f->fmt.pix.ycbcr_enc;
> > +             ctx->quant = f->fmt.pix.quantization;
> > +     }
> > +
> > +     frm->width      = f->fmt.pix.width;
> > +     frm->height     = f->fmt.pix.height;
> > +     frm->size       = f->fmt.pix.sizeimage;
> > +     /* Reset crop settings */
> > +     frm->o_width    = 0;
> > +     frm->o_height   = 0;
> > +     frm->c_width    = frm->width;
> > +     frm->c_height   = frm->height;
>
> Why store crop values when cropping is not supported? Just crop this, this seems to be
> copy-and-paste from the samsung driver.

dma2d controller supports cropping by OOR, FGOR, BGOR.
output/foreground/background offset register. but this part is working
now, i'll remove c_width, c_height at v3.

>
> > +     frm->right      = frm->width;
> > +     frm->bottom     = frm->height;
> > +     frm->fmt        = fmt;
> > +     frm->line_offset        = 0;
> > +     if (f->fmt.win.global_alpha != 0) {
>
> Huh? There is no f->fmt.win, this v4l2_format struct uses f->fmt.pix.

Thanks, I'll try to find another way for FGPFCCR.

>
> > +             frm->a_rgb[3] = f->fmt.win.global_alpha;
> > +             frm->a_mode = DMA2D_ALPHA_MODE_REPLACE;
>
> Again perhaps old copy-and-paste code from the samsung driver?

This driver is based on s5p-g2d, but the alpha part does not refer to s5p-g2d.
I'm still trying to find a reference about the overly on m2m driver,
but no luck.
imx-pxp does support the overlay feature, but their driver didn't
include that part.

m2m support capture/output, but for dma2d, it's need a third layer, which means
foreground + background => output, i can use m2m-output for dma2d-foreground,
m2m-capture for dma2d-output, but can't a layer for dma2d-background.

maybe v4l2_framebuffer is an option for it? Thanks
since the blend part is not ready, I will remove a_mode in v3.

>
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static void device_run(void *prv)
> > +{
> > +     struct dma2d_ctx *ctx = prv;
> > +     struct dma2d_dev *dev = ctx->dev;
> > +     struct dma2d_frame *frm_out, *frm_cap;
> > +     struct vb2_v4l2_buffer *src, *dst;
> > +     unsigned long flags;
> > +
> > +     spin_lock_irqsave(&dev->ctrl_lock, flags);
> > +     dev->curr = ctx;
> > +
> > +     src = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
> > +     dst = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
> > +     if (!dst || !src)
> > +             goto end;
> > +
> > +     frm_cap = get_frame(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
> > +     frm_out = get_frame(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
> > +     if (!frm_cap || !frm_out)
> > +             goto end;
> > +
> > +     src->sequence = frm_out->sequence++;
> > +     dst->sequence = frm_cap->sequence++;
> > +     v4l2_m2m_buf_copy_metadata(src, dst, true);
> > +
> > +     clk_enable(dev->gate);
> > +
> > +     dma2d_config_fg(dev, frm_out,
> > +                     vb2_dma_contig_plane_dma_addr(&src->vb2_buf, 0));
> > +
> > +     /* TODO: add M2M_BLEND handler here */
> > +
> > +     if (ctx->op_mode != DMA2D_MODE_R2M) {
> > +             if (frm_out->fmt->fourcc == frm_cap->fmt->fourcc)
> > +                     ctx->op_mode = DMA2D_MODE_M2M;
> > +             else
> > +                     ctx->op_mode = DMA2D_MODE_M2M_FPC;
> > +     }
> > +
> > +     dma2d_config_out(dev, frm_cap,
> > +                      vb2_dma_contig_plane_dma_addr(&dst->vb2_buf, 0));
> > +     dma2d_config_common(dev, ctx->op_mode, frm_cap->width, frm_cap->height);
> > +
> > +     dma2d_start(dev);
> > +end:
> > +     spin_unlock_irqrestore(&dev->ctrl_lock, flags);
> > +}
> > +
> > +static irqreturn_t dma2d_isr(int irq, void *prv)
> > +{
> > +     struct dma2d_dev *dev = prv;
> > +     struct dma2d_ctx *ctx = dev->curr;
> > +     struct vb2_v4l2_buffer *src, *dst;
> > +     u32 s = dma2d_get_int(dev);
> > +
> > +     if (s & ISR_TCIF || s == 0) {
> > +             dma2d_clear_int(dev);
> > +             clk_disable(dev->gate);
> > +
> > +             WARN_ON(!ctx);
> > +
> > +             src = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
> > +             dst = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
> > +
> > +             WARN_ON(!dst);
> > +             WARN_ON(!src);
> > +
> > +             v4l2_m2m_buf_done(src, VB2_BUF_STATE_DONE);
> > +             v4l2_m2m_buf_done(dst, VB2_BUF_STATE_DONE);
> > +             v4l2_m2m_job_finish(dev->m2m_dev, ctx->fh.m2m_ctx);
> > +
> > +             dev->curr = NULL;
> > +     } else {
> > +             dma2d_clear_int(dev);
> > +     }
> > +
> > +     return IRQ_HANDLED;
> > +}
> > +
> > +static const struct v4l2_file_operations dma2d_fops = {
> > +     .owner          = THIS_MODULE,
> > +     .open           = dma2d_open,
> > +     .release        = dma2d_release,
> > +     .poll           = v4l2_m2m_fop_poll,
> > +     .unlocked_ioctl = video_ioctl2,
> > +     .mmap           = v4l2_m2m_fop_mmap,
> > +#ifndef CONFIG_MMU
> > +     .get_unmapped_area = v4l2_m2m_get_unmapped_area,
> > +#endif
> > +};
> > +
> > +static const struct v4l2_ioctl_ops dma2d_ioctl_ops = {
> > +     .vidioc_querycap        = vidioc_querycap,
> > +
> > +     .vidioc_enum_fmt_vid_cap        = vidioc_enum_fmt,
> > +     .vidioc_g_fmt_vid_cap           = vidioc_g_fmt,
> > +     .vidioc_try_fmt_vid_cap         = vidioc_try_fmt,
> > +     .vidioc_s_fmt_vid_cap           = vidioc_s_fmt,
> > +
> > +     .vidioc_enum_fmt_vid_out        = vidioc_enum_fmt,
> > +     .vidioc_g_fmt_vid_out           = vidioc_g_fmt,
> > +     .vidioc_try_fmt_vid_out         = vidioc_try_fmt,
> > +     .vidioc_s_fmt_vid_out           = vidioc_s_fmt,
> > +
> > +     .vidioc_reqbufs                 = v4l2_m2m_ioctl_reqbufs,
> > +     .vidioc_querybuf                = v4l2_m2m_ioctl_querybuf,
> > +     .vidioc_qbuf                    = v4l2_m2m_ioctl_qbuf,
> > +     .vidioc_dqbuf                   = v4l2_m2m_ioctl_dqbuf,
> > +     .vidioc_prepare_buf             = v4l2_m2m_ioctl_prepare_buf,
> > +     .vidioc_create_bufs             = v4l2_m2m_ioctl_create_bufs,
> > +     .vidioc_expbuf                  = v4l2_m2m_ioctl_expbuf,
> > +
> > +     .vidioc_streamon                = v4l2_m2m_ioctl_streamon,
> > +     .vidioc_streamoff               = v4l2_m2m_ioctl_streamoff,
> > +
> > +     .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
> > +     .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
> > +};
> > +
> > +static const struct video_device dma2d_videodev = {
> > +     .name           = DMA2D_NAME,
> > +     .fops           = &dma2d_fops,
> > +     .ioctl_ops      = &dma2d_ioctl_ops,
> > +     .minor          = -1,
> > +     .release        = video_device_release,
> > +     .vfl_dir        = VFL_DIR_M2M,
> > +};
> > +
> > +static const struct v4l2_m2m_ops dma2d_m2m_ops = {
> > +     .device_run     = device_run,
> > +};
> > +
> > +static const struct of_device_id stm32_dma2d_match[];
> > +
> > +static int dma2d_probe(struct platform_device *pdev)
> > +{
> > +     struct dma2d_dev *dev;
> > +     struct video_device *vfd;
> > +     struct resource *res;
> > +     int ret = 0;
> > +
> > +     dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
> > +     if (!dev)
> > +             return -ENOMEM;
> > +
> > +     spin_lock_init(&dev->ctrl_lock);
> > +     mutex_init(&dev->mutex);
> > +     atomic_set(&dev->num_inst, 0);
> > +
> > +     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +
> > +     dev->regs = devm_ioremap_resource(&pdev->dev, res);
> > +     if (IS_ERR(dev->regs))
> > +             return PTR_ERR(dev->regs);
> > +
> > +     dev->gate = clk_get(&pdev->dev, "dma2d");
> > +     if (IS_ERR(dev->gate)) {
> > +             dev_err(&pdev->dev, "failed to get dma2d clock gate\n");
> > +             ret = -ENXIO;
> > +             return ret;
> > +     }
> > +
> > +     ret = clk_prepare(dev->gate);
> > +     if (ret) {
> > +             dev_err(&pdev->dev, "failed to prepare dma2d clock gate\n");
> > +             goto put_clk_gate;
> > +     }
> > +
> > +     res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> > +     if (!res) {
> > +             dev_err(&pdev->dev, "failed to find IRQ\n");
> > +             ret = -ENXIO;
> > +             goto unprep_clk_gate;
> > +     }
> > +
> > +     dev->irq = res->start;
> > +
> > +     ret = devm_request_irq(&pdev->dev, dev->irq, dma2d_isr,
> > +                            0, pdev->name, dev);
> > +     if (ret) {
> > +             dev_err(&pdev->dev, "failed to install IRQ\n");
> > +             goto unprep_clk_gate;
> > +     }
> > +
> > +     ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
> > +     if (ret)
> > +             goto unprep_clk_gate;
> > +
> > +     vfd = video_device_alloc();
> > +     if (!vfd) {
> > +             v4l2_err(&dev->v4l2_dev, "Failed to allocate video device\n");
> > +             ret = -ENOMEM;
> > +             goto unreg_v4l2_dev;
> > +     }
> > +
> > +     *vfd = dma2d_videodev;
> > +     set_bit(V4L2_FL_QUIRK_INVERTED_CROP, &vfd->flags);
>
> Drop this quirk! Definitely copy-and-paste from the samsung driver, and not something
> you want or need here.

OK, I'll add crop feature in the future.

>
> > +     vfd->lock = &dev->mutex;
> > +     vfd->v4l2_dev = &dev->v4l2_dev;
> > +     vfd->device_caps = V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING;
> > +     ret = video_register_device(vfd, VFL_TYPE_VIDEO, 0);
>
> This must be done last, so move it to the end of the probe().

OK

>
> > +     if (ret) {
> > +             v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
> > +             goto rel_vdev;
> > +     }
> > +
> > +     video_set_drvdata(vfd, dev);
> > +     dev->vfd = vfd;
> > +     v4l2_info(&dev->v4l2_dev, "device registered as /dev/video%d\n",
> > +               vfd->num);
> > +     platform_set_drvdata(pdev, dev);
> > +     dev->m2m_dev = v4l2_m2m_init(&dma2d_m2m_ops);
> > +     if (IS_ERR(dev->m2m_dev)) {
> > +             v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem device\n");
> > +             ret = PTR_ERR(dev->m2m_dev);
> > +             goto unreg_video_dev;
> > +     }
> > +
> > +     v4l2_info(&dev->v4l2_dev, "stm32 dma2d initialized\n");
> > +     return 0;
> > +
> > +unreg_video_dev:
> > +     video_unregister_device(dev->vfd);
> > +rel_vdev:
> > +     video_device_release(vfd);
> > +unreg_v4l2_dev:
> > +     v4l2_device_unregister(&dev->v4l2_dev);
> > +unprep_clk_gate:
> > +     clk_unprepare(dev->gate);
> > +put_clk_gate:
> > +     clk_put(dev->gate);
> > +
> > +     return ret;
> > +}
> > +
> > +static int dma2d_remove(struct platform_device *pdev)
> > +{
> > +     struct dma2d_dev *dev = platform_get_drvdata(pdev);
> > +
> > +     v4l2_info(&dev->v4l2_dev, "Removing " DMA2D_NAME);
> > +     v4l2_m2m_release(dev->m2m_dev);
> > +     video_unregister_device(dev->vfd);
> > +     v4l2_device_unregister(&dev->v4l2_dev);
> > +     vb2_dma_contig_clear_max_seg_size(&pdev->dev);
> > +     clk_unprepare(dev->gate);
> > +     clk_put(dev->gate);
> > +
> > +     return 0;
> > +}
> > +
> > +static const struct of_device_id stm32_dma2d_match[] = {
> > +     {
> > +             .compatible = "st,stm32-dma2d",
> > +             .data = NULL,
> > +     },
> > +     {},
> > +};
> > +MODULE_DEVICE_TABLE(of, stm32_dma2d_match);
> > +
> > +static struct platform_driver dma2d_pdrv = {
> > +     .probe          = dma2d_probe,
> > +     .remove         = dma2d_remove,
> > +     .driver         = {
> > +             .name = DMA2D_NAME,
> > +             .of_match_table = stm32_dma2d_match,
> > +     },
> > +};
> > +
> > +module_platform_driver(dma2d_pdrv);
> > +
> > +MODULE_AUTHOR("Dillon Min <dillon.minfei@xxxxxxxxx>");
> > +MODULE_DESCRIPTION("STM32 Chrom-Art Accelerator DMA2D driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/media/platform/stm32/dma2d/dma2d.h b/drivers/media/platform/stm32/dma2d/dma2d.h
> > new file mode 100644
> > index 000000000000..f317cf1dd35a
> > --- /dev/null
> > +++ b/drivers/media/platform/stm32/dma2d/dma2d.h
> > @@ -0,0 +1,136 @@
> > +/* SPDX-License-Identifier: GPL-2.0-or-later */
> > +/*
> > + * ST stm32 DMA2D - 2D Graphics Accelerator Driver
> > + *
> > + * Copyright (c) 2021 Dillon Min
> > + * Dillon Min, <dillon.minfei@xxxxxxxxx>
> > + *
> > + * based on s5p-g2d
> > + *
> > + * Copyright (c) 2011 Samsung Electronics Co., Ltd.
> > + * Kamil Debski, <k.debski@xxxxxxxxxxx>
> > + */
> > +
> > +#ifndef __DMA2D_H__
> > +#define __DMA2D_H__
> > +
> > +#include <linux/platform_device.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/v4l2-ctrls.h>
> > +
> > +#define DMA2D_NAME "stm-dma2d"
> > +#define BUS_INFO "platform:stm-dma2d"
> > +enum dma2d_op_mode {
> > +     DMA2D_MODE_M2M,
> > +     DMA2D_MODE_M2M_FPC,
> > +     DMA2D_MODE_M2M_BLEND,
> > +     DMA2D_MODE_R2M
> > +};
> > +
> > +enum dma2d_cmode {
> > +     /* output pfc cmode from ARGB888 to ARGB4444 */
> > +     DMA2D_CMODE_ARGB8888,
> > +     DMA2D_CMODE_RGB888,
> > +     DMA2D_CMODE_RGB565,
> > +     DMA2D_CMODE_ARGB1555,
> > +     DMA2D_CMODE_ARGB4444,
> > +     /* bg or fg pfc cmode from L8 to A4 */
> > +     DMA2D_CMODE_L8,
> > +     DMA2D_CMODE_AL44,
> > +     DMA2D_CMODE_AL88,
> > +     DMA2D_CMODE_L4,
> > +     DMA2D_CMODE_A8,
> > +     DMA2D_CMODE_A4
> > +};
> > +
> > +enum dma2d_alpha_mode {
> > +     DMA2D_ALPHA_MODE_NO_MODIF,
> > +     DMA2D_ALPHA_MODE_REPLACE,
> > +     DMA2D_ALPHA_MODE_COMBINE
> > +};
> > +
> > +struct dma2d_fmt {
> > +     u32     fourcc;
> > +     int     depth;
> > +     enum dma2d_cmode cmode;
> > +};
> > +
> > +struct dma2d_frame {
> > +     /* Original dimensions */
> > +     u32     width;
> > +     u32     height;
> > +     /* Crop size */
> > +     u32     c_width;
> > +     u32     c_height;
> > +     /* Offset */
> > +     u32     o_width;
> > +     u32     o_height;
> > +     u32     bottom;
> > +     u32     right;
> > +     u16     line_offset;
> > +     /* Image format */
> > +     struct dma2d_fmt *fmt;
> > +     /* [0]: blue
> > +      * [1]: green
> > +      * [2]: red
> > +      * [3]: alpha
> > +      */
> > +     u8      a_rgb[4];
> > +     /*
> > +      * AM[1:0] of DMA2D_FGPFCCR
> > +      */
> > +     enum dma2d_alpha_mode a_mode;
> > +     u32 size;
> > +     unsigned int    sequence;
> > +};
> > +
> > +struct dma2d_ctx {
> > +     struct v4l2_fh fh;
> > +     struct dma2d_dev        *dev;
> > +     struct dma2d_frame      cap;
> > +     struct dma2d_frame      out;
> > +     struct dma2d_frame      bg;
> > +     /* fb_buf always point to bg address */
> > +     struct v4l2_framebuffer fb_buf;
> > +     /*
> > +      * MODE[17:16] of DMA2D_CR
> > +      */
> > +     enum dma2d_op_mode      op_mode;
> > +     u8                      alpha_component;
> > +     struct v4l2_ctrl_handler ctrl_handler;
> > +     enum v4l2_colorspace    colorspace;
> > +     enum v4l2_ycbcr_encoding ycbcr_enc;
> > +     enum v4l2_xfer_func     xfer_func;
> > +     enum v4l2_quantization  quant;
> > +};
> > +
> > +struct dma2d_dev {
> > +     struct v4l2_device      v4l2_dev;
> > +     struct v4l2_m2m_dev     *m2m_dev;
> > +     struct video_device     *vfd;
> > +     /* for device open/close etc */
> > +     struct mutex            mutex;
> > +     /* to avoid the conflict with device running and user setting
> > +      * at the same time
> > +      */
> > +     spinlock_t              ctrl_lock;
> > +     atomic_t                num_inst;
> > +     void __iomem            *regs;
> > +     struct clk              *gate;
> > +     struct dma2d_ctx        *curr;
> > +     int irq;
> > +};
> > +
> > +void dma2d_start(struct dma2d_dev *d);
> > +u32 dma2d_get_int(struct dma2d_dev *d);
> > +void dma2d_clear_int(struct dma2d_dev *d);
> > +void dma2d_config_out(struct dma2d_dev *d, struct dma2d_frame *frm,
> > +                   dma_addr_t o_addr);
> > +void dma2d_config_fg(struct dma2d_dev *d, struct dma2d_frame *frm,
> > +                  dma_addr_t f_addr);
> > +void dma2d_config_bg(struct dma2d_dev *d, struct dma2d_frame *frm,
> > +                  dma_addr_t b_addr);
> > +void dma2d_config_common(struct dma2d_dev *d, enum dma2d_op_mode op_mode,
> > +                      u16 width, u16 height);
> > +
> > +#endif /* __DMA2D_H__ */
> >
>
> Regards,
>
>         Hans

Thanks and Best Regards.
Dillon




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux