Re: [PATCH V7 7/9] PCI/sysfs: Add a 10-Bit Tag sysfs file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 2021/8/5 7:49, Bjorn Helgaas wrote:
On Wed, Aug 04, 2021 at 09:47:06PM +0800, Dongdong Liu wrote:
PCIe spec 5.0 r1.0 section 2.2.6.2 says that if an Endpoint supports
sending Requests to other Endpoints (as opposed to host memory), the
Endpoint must not send 10-Bit Tag Requests to another given Endpoint
unless an implementation-specific mechanism determines that the Endpoint
supports 10-Bit Tag Completer capability. Add a 10bit_tag sysfs file,
write 0 to disable 10-Bit Tag Requester when the driver does not bind
the device if the peer device does not support the 10-Bit Tag Completer.
This will make P2P traffic safe. the 10bit_tag file content indicate
current 10-Bit Tag Requester Enable status.

Signed-off-by: Dongdong Liu <liudongdong3@xxxxxxxxxx>
---
 Documentation/ABI/testing/sysfs-bus-pci | 16 +++++++-
 drivers/pci/pci-sysfs.c                 | 69 +++++++++++++++++++++++++++++++++
 2 files changed, 84 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 793cbb7..0e0c97d 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -139,7 +139,7 @@ Description:
 		binary file containing the Vital Product Data for the
 		device.  It should follow the VPD format defined in
 		PCI Specification 2.1 or 2.2, but users should consider
-		that some devices may have incorrectly formatted data.
+		that some devices may have incorrectly formatted data.
 		If the underlying VPD has a writable section then the
 		corresponding section of this file will be writable.

@@ -407,3 +407,17 @@ Description:

 		The file is writable if the PF is bound to a driver that
 		implements ->sriov_set_msix_vec_count().
+
+What:		/sys/bus/pci/devices/.../10bit_tag
+Date:		August 2021
+Contact:	Dongdong Liu <liudongdong3@xxxxxxxxxx>
+Description:
+		If a PCI device support 10-Bit Tag Requester, will create the
+		10bit_tag sysfs file. The file is readable, the value
+		indicate current 10-Bit Tag Requester Enable.
+		1 - enabled, 0 - disabled.
+
+		The file is also writeable, the value only accept by write 0
+		to disable 10-Bit Tag Requester when the driver does not bind
+		the deivce. The typical use case is for p2pdma when the peer
+		device does not support 10-BIT Tag Completer.

s/writeable/writable/
s/deivce/device/
Will fix.

The first sentence does not parse.
10bit_tag sysfs file will be visible only when the device have 10-Bit
Tag Requester Supported capability.

Will fix.

diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 5d63df7..e93ce8b 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -306,6 +306,49 @@ static ssize_t enable_show(struct device *dev, struct device_attribute *attr,
 }
 static DEVICE_ATTR_RW(enable);

+static ssize_t pci_10bit_tag_store(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t count)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	bool enable;
+
+	if (kstrtobool(buf, &enable) < 0)
+		return -EINVAL;
+
+	if (enable != false )
+		return -EINVAL;

Is this the same as "if (enable)"?
Yes, Will fix.

+	if (pdev->driver)
+		 return -EBUSY;
+
+	pcie_capability_clear_word(pdev, PCI_EXP_DEVCTL2,
+				   PCI_EXP_DEVCTL2_10BIT_TAG_REQ_EN);
+	pci_info(pdev, "disabled 10-Bit Tag Requester\n");
+
+	return count;
+}
+
+static ssize_t pci_10bit_tag_show(struct device *dev,
+				  struct device_attribute *attr,
+				  char *buf)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	u16 ctl;
+	int ret;
+
+	ret = pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &ctl);
+	if (ret)
+		return -EINVAL;
+
+	return sysfs_emit(buf, "%u\n",
+			  !!(ctl & PCI_EXP_DEVCTL2_10BIT_TAG_REQ_EN));
+}
+
+static struct device_attribute dev_attr_10bit_tag = __ATTR(10bit_tag, 0600,
+							   pci_10bit_tag_show,
+							   pci_10bit_tag_store);

Is this DEVICE_ATTR_ADMIN_RW()?

Why is it 0600?  Everything else in this file looks like
DEVICE_ATTR_RO or DEVICE_ATTR_RW.  This should be the same unless
there's a reason to be different.
Should be 0644, I do not use DEVICE_ATTR_RW, just want to
use "10bit_tag" file name.
Will fix.

Thanks,
Dongdong

 #ifdef CONFIG_NUMA
 static ssize_t numa_node_store(struct device *dev,
 			       struct device_attribute *attr, const char *buf,
@@ -635,6 +678,11 @@ static struct attribute *pcie_dev_attrs[] = {
 	NULL,
 };

+static struct attribute *pcie_dev_10bit_tag_attrs[] = {
+	&dev_attr_10bit_tag.attr,
+	NULL,
+};
+
 static struct attribute *pcibus_attrs[] = {
 	&dev_attr_bus_rescan.attr,
 	&dev_attr_cpuaffinity.attr,
@@ -1482,6 +1530,21 @@ static umode_t pcie_dev_attrs_are_visible(struct kobject *kobj,
 	return 0;
 }

+static umode_t pcie_dev_10bit_tag_attrs_are_visible(struct kobject *kobj,
+					  struct attribute *a, int n)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	if (pdev->is_virtfn)
+		return 0;
+
+	if (!(pdev->pcie_devcap2 & PCI_EXP_DEVCAP2_10BIT_TAG_REQ))
+		return 0;
+
+	return a->mode;
+}
+
 static const struct attribute_group pci_dev_group = {
 	.attrs = pci_dev_attrs,
 };
@@ -1521,6 +1584,11 @@ static const struct attribute_group pcie_dev_attr_group = {
 	.is_visible = pcie_dev_attrs_are_visible,
 };

+static const struct attribute_group pcie_dev_10bit_tag_attr_group = {
+	.attrs = pcie_dev_10bit_tag_attrs,
+	.is_visible = pcie_dev_10bit_tag_attrs_are_visible,
+};
+
 static const struct attribute_group *pci_dev_attr_groups[] = {
 	&pci_dev_attr_group,
 	&pci_dev_hp_attr_group,
@@ -1530,6 +1598,7 @@ static const struct attribute_group *pci_dev_attr_groups[] = {
 #endif
 	&pci_bridge_attr_group,
 	&pcie_dev_attr_group,
+	&pcie_dev_10bit_tag_attr_group,
 #ifdef CONFIG_PCIEAER
 	&aer_stats_attr_group,
 #endif
--
2.7.4

.





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux