Re: [PATCH v5 3/3] media: platform: mtk-mdp3: Add Mediatek MDP3 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



,  Hi, Moudy

Moudy Ho <moudy.ho@xxxxxxxxxxxx> 於 2021年7月19日 週一 下午4:19寫道:
>
> This patch adds driver for Media Data Path 3 (MDP3).
> Each modules' related operation control is sited in mtk-mdp3-comp.c
> Each modules' register table is defined in file with "mdp_reg_"
> and "mmsys_" prefix
> GCE related API, operation control  sited in mtk-mdp3-cmdq.c
> V4L2 m2m device functions are implemented in mtk-mdp3-m2m.c
> Probe, power, suspend/resume, system level functions are defined in
> mtk-mdp3-core.c
>
> Signed-off-by: Ping-Hsun Wu <ping-hsun.wu@xxxxxxxxxxxx>
> Signed-off-by: daoyuan huang <daoyuan.huang@xxxxxxxxxxxx>
> Signed-off-by: Moudy Ho <moudy.ho@xxxxxxxxxxxx>
> ---
> Depend on:
>    [1] https://patchwork.kernel.org/project/linux-mediatek/patch/20190906115513.159705-9-acourbot@xxxxxxxxxxxx/
>    [2] https://patchwork.kernel.org/project/linux-mediatek/patch/20190906115513.159705-10-acourbot@xxxxxxxxxxxx/
> ---

[snip]

> +
> +static int mdp_path_subfrm_require(struct mdp_path_subfrm *subfrm,
> +                                  const struct mdp_path *path,
> +                                  struct mdp_cmd *cmd, u32 count)
> +{
> +       const struct img_config *config = path->config;
> +       const struct mdp_comp_ctx *ctx;
> +       phys_addr_t mm_mutex = path->mdp_dev->mm_mutex.reg_base;
> +       s32 mutex_id = -1;
> +       u32 mutex_sof = 0;
> +       int mdp_color = 0;
> +       int index;
> +       u8 subsys_id = path->mdp_dev->mm_mutex.subsys_id;
> +
> +       /* Default value */
> +       memset(subfrm, 0, sizeof(*subfrm));
> +
> +       for (index = 0; index < config->num_components; index++) {
> +               ctx = &path->comps[index];
> +               if (is_output_disable(ctx->param, count))
> +                       continue;
> +               switch (ctx->comp->id) {
> +               /**********************************************
> +                * Name            MSB LSB
> +                * DISP_MUTEX_MOD   23   0
> +                *
> +                * Specifies which modules are in this mutex.
> +                * Every bit denotes a module. Bit definition:
> +                *  2 mdp_rdma0
> +                *  4 mdp_rsz0
> +                *  5 mdp_rsz1
> +                *  6 mdp_tdshp
> +                *  7 mdp_wrot0
> +                *  8 mdp_wdma
> +                *  13 mdp_color
> +                *  23 mdp_aal
> +                *  24 mdp_ccorr
> +                **********************************************/
> +               case MDP_AAL0:
> +                       subfrm->mutex_mod |= 1 << 23;
> +                       break;
> +               case MDP_CCORR0:
> +                       subfrm->mutex_mod |= 1 << 24;
> +                       break;
> +               case MDP_COLOR0:
> +                       if (mdp_color)
> +                               subfrm->mutex_mod |= 1 << 13;
> +                       break;
> +               case MDP_WDMA:
> +                       subfrm->mutex_mod |= 1 << 8;
> +                       subfrm->sofs[subfrm->num_sofs++] = MDP_WDMA;
> +                       break;
> +               case MDP_WROT0:
> +                       subfrm->mutex_mod |= 1 << 7;
> +                       subfrm->sofs[subfrm->num_sofs++] = MDP_WROT0;
> +                       break;
> +               case MDP_TDSHP0:
> +                       subfrm->mutex_mod |= 1 << 6;
> +                       subfrm->sofs[subfrm->num_sofs++] = MDP_TDSHP0;
> +                       break;
> +               case MDP_SCL1:
> +                       subfrm->mutex_mod |= 1 << 5;
> +                       subfrm->sofs[subfrm->num_sofs++] = MDP_SCL1;
> +                       break;
> +               case MDP_SCL0:
> +                       subfrm->mutex_mod |= 1 << 4;
> +                       subfrm->sofs[subfrm->num_sofs++] = MDP_SCL0;
> +                       break;
> +               case MDP_RDMA0:
> +                       mutex_id = DISP_MUTEX_MDP_FIRST + 1;
> +                       subfrm->mutex_mod |= 1 << 2;
> +                       subfrm->sofs[subfrm->num_sofs++] = MDP_RDMA0;
> +                       break;
> +               case MDP_IMGI:
> +                       mutex_id = DISP_MUTEX_MDP_FIRST;
> +                       break;
> +               case MDP_WPEI:
> +                       mutex_id = DISP_MUTEX_MDP_FIRST + 3;
> +                       break;
> +               case MDP_WPEI2:
> +                       mutex_id = DISP_MUTEX_MDP_FIRST + 4;
> +                       break;
> +               default:
> +                       break;
> +               }
> +       }
> +
> +       subfrm->mutex_id = mutex_id;
> +       if (-1 == mutex_id) {
> +               mdp_err("No mutex assigned");
> +               return -EINVAL;
> +       }
> +
> +       if (subfrm->mutex_mod) {
> +               /* Set mutex modules */
> +               MM_REG_WRITE(cmd, subsys_id, mm_mutex, MM_MUTEX_MOD,
> +                            subfrm->mutex_mod, 0x07FFFFFF);
> +               MM_REG_WRITE(cmd, subsys_id, mm_mutex, MM_MUTEX_SOF,
> +                            mutex_sof, 0x00000007);

Move mutex register setting to drivers/soc/mediatek/mtk-mutex.c, and
let mtk-mutex driver provide interface for mdp driver to use.

> +       }
> +       return 0;
> +}
> +

[snip]

> +
> +static int mdp_path_config_subfrm(struct mdp_cmd *cmd, struct mdp_path *path,
> +                                 u32 count)
> +{
> +       struct mdp_path_subfrm subfrm;
> +       const struct img_config *config = path->config;
> +       const struct img_mmsys_ctrl *ctrl = &config->ctrls[count];
> +       const struct img_mux *set;
> +       struct mdp_comp_ctx *ctx;
> +       phys_addr_t mmsys = path->mdp_dev->mmsys.reg_base;
> +       int index, ret;
> +       u8 subsys_id = path->mdp_dev->mmsys.subsys_id;
> +
> +       /* Acquire components */
> +       ret = mdp_path_subfrm_require(&subfrm, path, cmd, count);
> +       if (ret)
> +               return ret;
> +       /* Enable mux settings */
> +       for (index = 0; index < ctrl->num_sets; index++) {
> +               set = &ctrl->sets[index];
> +               MM_REG_WRITE_MASK(cmd, subsys_id, mmsys, set->reg, set->value,
> +                                 0xFFFFFFFF);

Move mmsys register setting to drivers/soc/mediatek/mtk-mmsys.c, and
let mtk-mmsys driver provide interface for mdp to use.

Regards,
Chun-Kuang.

> +       }
> +       /* Config sub-frame information */
> +       for (index = (config->num_components - 1); index >= 0; index--) {
> +               ctx = &path->comps[index];
> +               if (is_output_disable(ctx->param, count))
> +                       continue;
> +               ret = call_op(ctx, config_subfrm, cmd, count);
> +               if (ret)
> +                       return ret;
> +       }
> +       /* Run components */
> +       ret = mdp_path_subfrm_run(&subfrm, path, cmd);
> +       if (ret)
> +               return ret;
> +       /* Wait components done */
> +       for (index = 0; index < config->num_components; index++) {
> +               ctx = &path->comps[index];
> +               if (is_output_disable(ctx->param, count))
> +                       continue;
> +               ret = call_op(ctx, wait_comp_event, cmd);
> +               if (ret)
> +                       return ret;
> +       }
> +       /* Advance to the next sub-frame */
> +       for (index = 0; index < config->num_components; index++) {
> +               ctx = &path->comps[index];
> +               ret = call_op(ctx, advance_subfrm, cmd, count);
> +               if (ret)
> +                       return ret;
> +       }
> +       /* Disable mux settings */
> +       for (index = 0; index < ctrl->num_sets; index++) {
> +               set = &ctrl->sets[index];
> +               MM_REG_WRITE_MASK(cmd, subsys_id, mmsys, set->reg, 0,
> +                                 0xFFFFFFFF);
> +       }
> +       return 0;
> +}
> +




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux