The dt-bindings examples are usually indented with 4 spaces.
The maxim,max9286 schema has the example indented with only
2 spaces, re-indent it.
Cosmetic change only.
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
.../bindings/media/i2c/maxim,max9286.yaml | 214 +++++++++---------
1 file changed, 107 insertions(+), 107 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
index ee16102fdfe7..0e7162998b77 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -191,140 +191,140 @@ examples:
#include <dt-bindings/gpio/gpio.h>
i2c@e66d8000 {
- #address-cells = <1>;
- #size-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg = <0 0xe66d8000>;
+ reg = <0 0xe66d8000>;
- gmsl-deserializer@2c {
- compatible = "maxim,max9286";
- reg = <0x2c>;
- poc-supply = <&camera_poc_12v>;
- enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ gmsl-deserializer@2c {
+ compatible = "maxim,max9286";
+ reg = <0x2c>;
+ poc-supply = <&camera_poc_12v>;
+ enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
- maxim,reverse-channel-microvolt = <170000>;
+ maxim,reverse-channel-microvolt = <170000>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- port@0 {
- reg = <0>;
+ port@0 {
+ reg = <0>;
- max9286_in0: endpoint {
- remote-endpoint = <&rdacm20_out0>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- max9286_in1: endpoint {
- remote-endpoint = <&rdacm20_out1>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- max9286_in2: endpoint {
- remote-endpoint = <&rdacm20_out2>;
- };
- };
+ max9286_in0: endpoint {
+ remote-endpoint = <&rdacm20_out0>;
+ };
+ };
- port@3 {
- reg = <3>;
+ port@1 {
+ reg = <1>;
- max9286_in3: endpoint {
- remote-endpoint = <&rdacm20_out3>;
- };
- };
+ max9286_in1: endpoint {
+ remote-endpoint = <&rdacm20_out1>;
+ };
+ };
- port@4 {
- reg = <4>;
+ port@2 {
+ reg = <2>;
- max9286_out: endpoint {
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&csi40_in>;
- };
- };
- };
+ max9286_in2: endpoint {
+ remote-endpoint = <&rdacm20_out2>;
+ };
+ };
- i2c-mux {
- #address-cells = <1>;
- #size-cells = <0>;
+ port@3 {
+ reg = <3>;
- i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
+ max9286_in3: endpoint {
+ remote-endpoint = <&rdacm20_out3>;
+ };
+ };
- camera@51 {
- compatible = "imi,rdacm20";
- reg = <0x51>, <0x61>;
+ port@4 {
+ reg = <4>;
- port {
- rdacm20_out0: endpoint {
- remote-endpoint = <&max9286_in0>;
+ max9286_out: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
};
- };
-
};
- };
-
- i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- camera@52 {
- compatible = "imi,rdacm20";
- reg = <0x52>, <0x62>;
+ i2c-mux {
+ #address-cells = <1>;
+ #size-cells = <0>;
- port {
- rdacm20_out1: endpoint {
- remote-endpoint = <&max9286_in1>;
- };
- };
- };
- };
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
- i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
+ camera@51 {
+ compatible = "imi,rdacm20";
+ reg = <0x51>, <0x61>;
- camera@53 {
- compatible = "imi,rdacm20";
- reg = <0x53>, <0x63>;
+ port {
+ rdacm20_out0: endpoint {
+ remote-endpoint = <&max9286_in0>;
+ };
+ };
- port {
- rdacm20_out2: endpoint {
- remote-endpoint = <&max9286_in2>;
+ };
};
- };
- };
- };
- i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ camera@52 {
+ compatible = "imi,rdacm20";
+ reg = <0x52>, <0x62>;
+
+ port {
+ rdacm20_out1: endpoint {
+ remote-endpoint = <&max9286_in1>;
+ };
+ };
+ };
+ };
- camera@54 {
- compatible = "imi,rdacm20";
- reg = <0x54>, <0x64>;
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ camera@53 {
+ compatible = "imi,rdacm20";
+ reg = <0x53>, <0x63>;
+
+ port {
+ rdacm20_out2: endpoint {
+ remote-endpoint = <&max9286_in2>;
+ };
+ };
+ };
+ };
- port {
- rdacm20_out3: endpoint {
- remote-endpoint = <&max9286_in3>;
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ camera@54 {
+ compatible = "imi,rdacm20";
+ reg = <0x54>, <0x64>;
+
+ port {
+ rdacm20_out3: endpoint {
+ remote-endpoint = <&max9286_in3>;
+ };
+ };
+ };
};
- };
};
- };
};
- };
};
--
2.32.0
