On Thu, May 27, 2010 at 02:17:04PM -0300, Mauro Carvalho Chehab wrote: > Em Sat, 8 May 2010 01:50:24 +0200 > Emard <davoremard@xxxxxxxxx> escreveu: > > > HI > > > > ... tried to post this few times to thhis list I don't know if > > it has made it maybe this time it will appear on the mailing list.... > > > > I have european version of Compro Videomate T750F Vista > > hybrid dvb-t + tv (PAL) + FM card. In kernels up to date (2.6.33.3) > > it didn't want to initialize in analog mode (tuner xc2028 always failed). > > > > Here's sligthly adapted patch from > > http://www.linuxtv.org/pipermail/linux-dvb/2008-May/025945.html > > that works for me. It disables analog tuner xc2028 which doesn't > > work (maybe because current driver is only for ntsc version of the > > card) and enables digital tuner that consists of zarlink 10353 and > > qt1010. Tested and works on kernel 2.6.33.3 > > xc2028 tuner driver supports PAL standards as well. If it is not working fine, > it is probably because the GPIO's are wrong. You need to run REGSPY.EXE program, > from DScaler project, to get the proper gpio values for your board. > > Btw, please send your Signed-off-by: on your patches. > > > > Best regards, Emard > > > > --- linux-2.6.33.3/drivers/media/video/saa7134/saa7134-cards.c.orig 2010-05-02 00:06:45.000000000 +0200 > > +++ linux-2.6.33.3/drivers/media/video/saa7134/saa7134-cards.c 2010-05-02 01:20:50.000000000 +0200 > > @@ -4883,10 +4883,11 @@ struct saa7134_board saa7134_boards[] = > > /* John Newbigin <jn@xxxxxxxxxxxxxx> */ > > .name = "Compro VideoMate T750", > > .audio_clock = 0x00187de7, > > - .tuner_type = TUNER_XC2028, > > + .tuner_type = TUNER_ABSENT, HI! Ignore this patch, this is early version that breaks analog part just to get dvb-t working. I had posted improved patch (I called it v17, should be on this list as well) with early supports for both analog dvb-t and radio on 2.6.33.4 (also the remote, but the IR system had changed so we may fix remote later... but that's easy :). We have another issues Patch v17 which works on my case from cold reboot and at least first time VDR is started. Subsequent restarts of VDR may prevent DVB-T tuner from changing frequency - it stays and receives the previos frequency at which VDR stopped. But sometimes after frew minutes VDR starts working again tuning to different freq - strange behaviour really maybe it's not only because of compro patch, could be firmware issue too) While Samuel is testing this he had some positive results but so far but he needs to preinitialize the card with window$ before the firmware gets loaded :(. I don't need this (anyway my motherboard removes PCI power for 2 seconds during restart so I even cannot try such intialization method) Emard -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
