On Fri, Jul 16, 2021 at 05:45:08PM +0300, Viktor Prutyanov wrote:
> This patch adds the driver for Amlogic Meson IR transmitter.
>
> Some Amlogic SoCs such as A311D and T950D4 have IR transmitter
> (also called blaster) controller onboard. It is capable of sending
> IR signals with arbitrary carrier frequency and duty cycle.
>
> The driver supports 2 modulation clock sources:
> - xtal3 clock (xtal divided by 3)
> - 1us clock
>
> Signed-off-by: Viktor Prutyanov <viktor.prutyanov@xxxxxxxxxxxx>
> ---
> changes in v2:
> - threaded IRQ removed, all stuff done in IRQ handler
> - DIV_ROUND_CLOSEST_ULL replaced with DIV_ROUND_CLOSEST
> - compatible changed to "amlogic,meson-g12a-irblaster"
> - 'debug' parameter removed
> - dprintk() replaced with dev_dbg()/dev_info()
> - carrier frequency checked against 0
> - device_name added
> changes in v3:
> - license header fixed
> - 'max_fifo_level' parameter removed
> - irq and clk_nr deleted from irblaster_dev struct
> - some divisions replaced with DIV_ROUND_CLOSEST
> - irb_send inlined
> - fixed early completion in IRQ handler
> - spin lock added before kfree
> changes in v4:
> - irblaster -> ir-tx renaming
> - spin lock added before buffer allocation
> changes in v5:
> - spinlocks rework made in meson_irtx_transmit
> - max_fifo_level replaced with fifo_threshold (max_fifo_level +
> fifo_threshold == IRB_FIFO_LEN == 128)
> - max-fifo-level -> amlogic,fifo-threshold
> changes in v6:
> - interruptible wait replaced with uninterruptible with timeout
> - completion done check added to IRQ handler
>
> drivers/media/rc/Kconfig | 10 +
> drivers/media/rc/Makefile | 1 +
> drivers/media/rc/meson-ir-tx.c | 415 +++++++++++++++++++++++++++++++++
> 3 files changed, 426 insertions(+)
> create mode 100644 drivers/media/rc/meson-ir-tx.c
>
> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
> index d0a8326b75c2..fd5a7a058714 100644
> --- a/drivers/media/rc/Kconfig
> +++ b/drivers/media/rc/Kconfig
> @@ -246,6 +246,16 @@ config IR_MESON
> To compile this driver as a module, choose M here: the
> module will be called meson-ir.
>
> +config IR_MESON_TX
> + tristate "Amlogic Meson IR TX"
> + depends on ARCH_MESON || COMPILE_TEST
> + help
> + Say Y if you want to use the IR transmitter available on
> + Amlogic Meson SoCs.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called meson-ir-tx.
> +
> config IR_MTK
> tristate "Mediatek IR remote receiver"
> depends on ARCH_MEDIATEK || COMPILE_TEST
> diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
> index 692e9b6b203f..0db51fad27d6 100644
> --- a/drivers/media/rc/Makefile
> +++ b/drivers/media/rc/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_IR_ITE_CIR) += ite-cir.o
> obj-$(CONFIG_IR_MCEUSB) += mceusb.o
> obj-$(CONFIG_IR_FINTEK) += fintek-cir.o
> obj-$(CONFIG_IR_MESON) += meson-ir.o
> +obj-$(CONFIG_IR_MESON_TX) += meson-ir-tx.o
> obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o
> obj-$(CONFIG_IR_ENE) += ene_ir.o
> obj-$(CONFIG_IR_REDRAT3) += redrat3.o
> diff --git a/drivers/media/rc/meson-ir-tx.c b/drivers/media/rc/meson-ir-tx.c
> new file mode 100644
> index 000000000000..77e276e3dbe8
> --- /dev/null
> +++ b/drivers/media/rc/meson-ir-tx.c
> @@ -0,0 +1,415 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/**
> + * meson-ir-tx.c - Amlogic Meson IR TX driver
> + *
> + * Copyright (c) 2021, SberDevices. All Rights Reserved.
> + *
> + * Author: Viktor Prutyanov <viktor.prutyanov@xxxxxxxxxxxx>
> + */
> +
> +#include <linux/device.h>
> +#include <linux/module.h>
> +#include <linux/sched.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/interrupt.h>
> +#include <linux/spinlock.h>
> +#include <linux/of_irq.h>
> +#include <linux/clk.h>
> +#include <linux/slab.h>
> +#include <media/rc-core.h>
> +
> +#define DEVICE_NAME "Meson IR TX"
> +#define DRIVER_NAME "meson-ir-tx"
> +
> +#define MIRTX_DEFAULT_CARRIER 38000
> +#define MIRTX_DEFAULT_DUTY_CYCLE 50
> +#define MIRTX_DEFAULT_FIFO_THD 32
> +#define MIRTX_TIMEOUT_US (IR_MAX_DURATION / NSEC_PER_USEC)
IR_MAX_DURATION is already in microseconds, see commit 528222d853f9. Now
the wait_for_completion_timeout() gets 500us as the timeout. Has this
been tested?
Looks good otherwise
Thanks
Sean
> +
> +#define IRB_MOD_1US_CLK_RATE 1000000
> +
> +#define IRB_FIFO_LEN 128
> +
> +#define IRB_ADDR0 0x0
> +#define IRB_ADDR1 0x4
> +#define IRB_ADDR2 0x8
> +#define IRB_ADDR3 0xc
> +
> +#define IRB_MAX_DELAY (1 << 10)
> +#define IRB_DELAY_MASK (IRB_MAX_DELAY - 1)
> +
> +/* IRCTRL_IR_BLASTER_ADDR0 */
> +#define IRB_MOD_CLK(x) ((x) << 12)
> +#define IRB_MOD_SYS_CLK 0
> +#define IRB_MOD_XTAL3_CLK 1
> +#define IRB_MOD_1US_CLK 2
> +#define IRB_MOD_10US_CLK 3
> +#define IRB_INIT_HIGH BIT(2)
> +#define IRB_ENABLE BIT(0)
> +
> +/* IRCTRL_IR_BLASTER_ADDR2 */
> +#define IRB_MOD_COUNT(lo, hi) ((((lo) - 1) << 16) | ((hi) - 1))
> +
> +/* IRCTRL_IR_BLASTER_ADDR2 */
> +#define IRB_WRITE_FIFO BIT(16)
> +#define IRB_MOD_ENABLE BIT(12)
> +#define IRB_TB_1US (0x0 << 10)
> +#define IRB_TB_10US (0x1 << 10)
> +#define IRB_TB_100US (0x2 << 10)
> +#define IRB_TB_MOD_CLK (0x3 << 10)
> +
> +/* IRCTRL_IR_BLASTER_ADDR3 */
> +#define IRB_FIFO_THD_PENDING BIT(16)
> +#define IRB_FIFO_IRQ_ENABLE BIT(8)
> +
> +struct meson_irtx {
> + struct device *dev;
> + void __iomem *reg_base;
> + u32 *buf;
> + unsigned int buf_len;
> + unsigned int buf_head;
> + unsigned int carrier;
> + unsigned int duty_cycle;
> + spinlock_t lock;
> + struct completion completion;
> + unsigned int fifo_threshold;
> + unsigned long clk_rate;
> +};
> +
> +static void meson_irtx_set_mod(struct meson_irtx *ir)
> +{
> + unsigned int cnt = DIV_ROUND_CLOSEST(ir->clk_rate, ir->carrier);
> + unsigned int pulse_cnt = DIV_ROUND_CLOSEST(cnt * ir->duty_cycle, 100);
> + unsigned int space_cnt = cnt - pulse_cnt;
> +
> + dev_dbg(ir->dev, "F_mod = %uHz, T_mod = %luns, duty_cycle = %u%%\n",
> + ir->carrier, NSEC_PER_SEC / ir->clk_rate * cnt,
> + 100 * pulse_cnt / cnt);
> +
> + writel(IRB_MOD_COUNT(pulse_cnt, space_cnt),
> + ir->reg_base + IRB_ADDR1);
> +}
> +
> +static void meson_irtx_setup(struct meson_irtx *ir, unsigned int clk_nr)
> +{
> + /*
> + * Disable the TX, set modulator clock tick and set initialize
> + * output to be high. Set up carrier frequency and duty cycle. Then
> + * unset initialize output. Enable FIFO interrupt, set FIFO interrupt
> + * threshold. Finally, enable the transmitter back.
> + */
> + writel(~IRB_ENABLE & (IRB_MOD_CLK(clk_nr) | IRB_INIT_HIGH),
> + ir->reg_base + IRB_ADDR0);
> + meson_irtx_set_mod(ir);
> + writel(readl(ir->reg_base + IRB_ADDR0) & ~IRB_INIT_HIGH,
> + ir->reg_base + IRB_ADDR0);
> + writel(IRB_FIFO_IRQ_ENABLE | ir->fifo_threshold,
> + ir->reg_base + IRB_ADDR3);
> + writel(readl(ir->reg_base + IRB_ADDR0) | IRB_ENABLE,
> + ir->reg_base + IRB_ADDR0);
> +}
> +
> +static u32 meson_irtx_prepare_pulse(struct meson_irtx *ir, unsigned int time)
> +{
> + unsigned int delay;
> + unsigned int tb = IRB_TB_MOD_CLK;
> + unsigned int tb_us = DIV_ROUND_CLOSEST(USEC_PER_SEC, ir->carrier);
> +
> + delay = (DIV_ROUND_CLOSEST(time, tb_us) - 1) & IRB_DELAY_MASK;
> +
> + return ((IRB_WRITE_FIFO | IRB_MOD_ENABLE) | tb | delay);
> +}
> +
> +static u32 meson_irtx_prepare_space(struct meson_irtx *ir, unsigned int time)
> +{
> + unsigned int delay;
> + unsigned int tb = IRB_TB_100US;
> + unsigned int tb_us = 100;
> +
> + if (time <= IRB_MAX_DELAY) {
> + tb = IRB_TB_1US;
> + tb_us = 1;
> + } else if (time <= 10 * IRB_MAX_DELAY) {
> + tb = IRB_TB_10US;
> + tb_us = 10;
> + } else if (time <= 100 * IRB_MAX_DELAY) {
> + tb = IRB_TB_100US;
> + tb_us = 100;
> + }
> +
> + delay = (DIV_ROUND_CLOSEST(time, tb_us) - 1) & IRB_DELAY_MASK;
> +
> + return ((IRB_WRITE_FIFO & ~IRB_MOD_ENABLE) | tb | delay);
> +}
> +
> +static void meson_irtx_send_buffer(struct meson_irtx *ir)
> +{
> + unsigned int nr = 0;
> + unsigned int max_fifo_level = IRB_FIFO_LEN - ir->fifo_threshold;
> +
> + while (ir->buf_head < ir->buf_len && nr < max_fifo_level) {
> + writel(ir->buf[ir->buf_head], ir->reg_base + IRB_ADDR2);
> +
> + ir->buf_head++;
> + nr++;
> + }
> +}
> +
> +static bool meson_irtx_check_buf(struct meson_irtx *ir,
> + unsigned int *buf, unsigned int len)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < len; i++) {
> + unsigned int max_tb_us;
> + /*
> + * Max space timebase is 100 us.
> + * Pulse timebase equals to carrier period.
> + */
> + if (i % 2 == 0)
> + max_tb_us = USEC_PER_SEC / ir->carrier;
> + else
> + max_tb_us = 100;
> +
> + if (buf[i] >= max_tb_us * IRB_MAX_DELAY)
> + return false;
> + }
> +
> + return true;
> +}
> +
> +static void meson_irtx_fill_buf(struct meson_irtx *ir, u32 *dst_buf,
> + unsigned int *src_buf, unsigned int len)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < len; i++) {
> + if (i % 2 == 0)
> + dst_buf[i] = meson_irtx_prepare_pulse(ir, src_buf[i]);
> + else
> + dst_buf[i] = meson_irtx_prepare_space(ir, src_buf[i]);
> + }
> +}
> +
> +static irqreturn_t meson_irtx_irqhandler(int irq, void *data)
> +{
> + unsigned long flags;
> + struct meson_irtx *ir = data;
> +
> + writel(readl(ir->reg_base + IRB_ADDR3) & ~IRB_FIFO_THD_PENDING,
> + ir->reg_base + IRB_ADDR3);
> +
> + if (completion_done(&ir->completion))
> + return IRQ_HANDLED;
> +
> + spin_lock_irqsave(&ir->lock, flags);
> + if (ir->buf_head < ir->buf_len)
> + meson_irtx_send_buffer(ir);
> + else
> + complete(&ir->completion);
> + spin_unlock_irqrestore(&ir->lock, flags);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int meson_irtx_set_carrier(struct rc_dev *rc, u32 carrier)
> +{
> + struct meson_irtx *ir = rc->priv;
> +
> + if (carrier == 0)
> + return -EINVAL;
> +
> + ir->carrier = carrier;
> + meson_irtx_set_mod(ir);
> +
> + return 0;
> +}
> +
> +static int meson_irtx_set_duty_cycle(struct rc_dev *rc, u32 duty_cycle)
> +{
> + struct meson_irtx *ir = rc->priv;
> +
> + ir->duty_cycle = duty_cycle;
> + meson_irtx_set_mod(ir);
> +
> + return 0;
> +}
> +
> +static void meson_irtx_update_buf(struct meson_irtx *ir, u32 *buf,
> + unsigned int len, unsigned int head)
> +{
> + ir->buf = buf;
> + ir->buf_len = len;
> + ir->buf_head = head;
> +}
> +
> +static int meson_irtx_transmit(struct rc_dev *rc, unsigned int *buf,
> + unsigned int len)
> +{
> + unsigned long flags;
> + struct meson_irtx *ir = rc->priv;
> + u32 *tx_buf;
> + int ret = len;
> +
> + if (!meson_irtx_check_buf(ir, buf, len))
> + return -EINVAL;
> +
> + tx_buf = kmalloc_array(len, sizeof(u32), GFP_KERNEL);
> + if (!tx_buf)
> + return -ENOMEM;
> +
> + meson_irtx_fill_buf(ir, tx_buf, buf, len);
> + dev_dbg(ir->dev, "TX buffer filled, length = %u\n", len);
> +
> + spin_lock_irqsave(&ir->lock, flags);
> + meson_irtx_update_buf(ir, tx_buf, len, 0);
> + reinit_completion(&ir->completion);
> + meson_irtx_send_buffer(ir);
> + spin_unlock_irqrestore(&ir->lock, flags);
> +
> + if (!wait_for_completion_timeout(&ir->completion,
> + usecs_to_jiffies(MIRTX_TIMEOUT_US)))
> + ret = -ETIMEDOUT;
> +
> + spin_lock_irqsave(&ir->lock, flags);
> + kfree(ir->buf);
> + meson_irtx_update_buf(ir, NULL, 0, 0);
> + spin_unlock_irqrestore(&ir->lock, flags);
> +
> + return ret;
> +}
> +
> +static int meson_irtx_mod_clock_probe(struct meson_irtx *ir,
> + unsigned int *clk_nr)
> +{
> + struct device_node *np = ir->dev->of_node;
> + struct clk *clock;
> +
> + if (!np)
> + return -ENODEV;
> +
> + clock = devm_clk_get(ir->dev, "xtal");
> + if (IS_ERR(clock) || clk_prepare_enable(clock))
> + return -ENODEV;
> +
> + *clk_nr = IRB_MOD_XTAL3_CLK;
> + ir->clk_rate = clk_get_rate(clock) / 3;
> +
> + if (ir->clk_rate < IRB_MOD_1US_CLK_RATE) {
> + *clk_nr = IRB_MOD_1US_CLK;
> + ir->clk_rate = IRB_MOD_1US_CLK_RATE;
> + }
> +
> + dev_info(ir->dev, "F_clk = %luHz\n", ir->clk_rate);
> +
> + return 0;
> +}
> +
> +static int __init meson_irtx_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct meson_irtx *ir;
> + struct rc_dev *rc;
> + int irq;
> + unsigned int clk_nr;
> + int ret;
> +
> + ir = devm_kzalloc(dev, sizeof(*ir), GFP_KERNEL);
> + if (!ir)
> + return -ENOMEM;
> +
> + ir->reg_base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(ir->reg_base))
> + return PTR_ERR(ir->reg_base);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0) {
> + dev_err(dev, "no irq resource found\n");
> + return -ENODEV;
> + }
> +
> + if (of_property_read_u32(dev->of_node, "amlogic,fifo-threshold",
> + &ir->fifo_threshold))
> + ir->fifo_threshold = MIRTX_DEFAULT_FIFO_THD;
> + else if (ir->fifo_threshold >= IRB_FIFO_LEN)
> + ir->fifo_threshold = MIRTX_DEFAULT_FIFO_THD;
> + dev_dbg(dev, "FIFO threshold set to %u\n", ir->fifo_threshold);
> +
> + ir->dev = dev;
> + ir->carrier = MIRTX_DEFAULT_CARRIER;
> + ir->duty_cycle = MIRTX_DEFAULT_DUTY_CYCLE;
> + init_completion(&ir->completion);
> + spin_lock_init(&ir->lock);
> +
> + ret = meson_irtx_mod_clock_probe(ir, &clk_nr);
> + if (ret) {
> + dev_err(dev, "modulator clock setup failed\n");
> + return ret;
> + }
> + meson_irtx_setup(ir, clk_nr);
> +
> + ret = devm_request_irq(dev, irq,
> + meson_irtx_irqhandler,
> + IRQF_TRIGGER_RISING,
> + DRIVER_NAME, ir);
> + if (ret) {
> + dev_err(dev, "irq request failed\n");
> + return ret;
> + }
> +
> + rc = rc_allocate_device(RC_DRIVER_IR_RAW_TX);
> + if (!rc)
> + return -ENOMEM;
> +
> + rc->driver_name = DRIVER_NAME;
> + rc->device_name = DEVICE_NAME;
> + rc->priv = ir;
> +
> + rc->tx_ir = meson_irtx_transmit;
> + rc->s_tx_carrier = meson_irtx_set_carrier;
> + rc->s_tx_duty_cycle = meson_irtx_set_duty_cycle;
> +
> + ret = rc_register_device(rc);
> + if (ret < 0) {
> + dev_err(dev, "rc_dev registration failed\n");
> + rc_free_device(rc);
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, rc);
> +
> + return 0;
> +}
> +
> +static int meson_irtx_remove(struct platform_device *pdev)
> +{
> + struct rc_dev *rc = platform_get_drvdata(pdev);
> +
> + rc_unregister_device(rc);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id meson_irtx_dt_match[] = {
> + {
> + .compatible = "amlogic,meson-g12a-ir-tx",
> + },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, meson_irtx_dt_match);
> +
> +static struct platform_driver meson_irtx_pd = {
> + .remove = meson_irtx_remove,
> + .driver = {
> + .name = DRIVER_NAME,
> + .owner = THIS_MODULE,
> + .of_match_table = meson_irtx_dt_match,
> + },
> +};
> +
> +module_platform_driver_probe(meson_irtx_pd, meson_irtx_probe);
> +
> +MODULE_DESCRIPTION("Meson IR TX driver");
> +MODULE_AUTHOR("Viktor Prutyanov <viktor.prutyanov@xxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> --
> 2.21.0
