Use for_each_set_bit() instead of open-coding it to simplify the code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- drivers/media/pci/intel/ipu3/ipu3-cio2-main.c | 75 +++++++++---------- 1 file changed, 36 insertions(+), 39 deletions(-) diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c index 9f75c9303416..5fb379e91071 100644 --- a/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c +++ b/drivers/media/pci/intel/ipu3/ipu3-cio2-main.c @@ -11,6 +11,7 @@ * et al. */ +#include <linux/bitops.h> #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/iopoll.h> @@ -612,6 +613,20 @@ static const char *const cio2_irq_errs[] = { "non-matching Long Packet stalled", }; +static void cio2_irq_log_irq_errs(struct device *dev, u8 port, u32 status) +{ + unsigned long csi2_status = status; + unsigned int i; + + for_each_set_bit(i, &csi2_status, ARRAY_SIZE(cio2_irq_errs)) + dev_err(dev, "CSI-2 receiver port %i: %s\n", + port, cio2_irq_errs[i]); + + if (fls_long(csi2_status) >= ARRAY_SIZE(cio2_irq_errs)) + dev_warn(dev, "unknown CSI2 error 0x%lx on port %i\n", + csi2_status, port); +} + static const char *const cio2_port_errs[] = { "ECC recoverable", "DPHY not recoverable", @@ -622,6 +637,15 @@ static const char *const cio2_port_errs[] = { "PKT2LONG", }; +static void cio2_irq_log_port_errs(struct device *dev, u8 port, u32 status) +{ + unsigned long port_status = status; + unsigned int i; + + for_each_set_bit(i, &port_status, ARRAY_SIZE(cio2_port_errs)) + dev_err(dev, "port %i error %s\n", port, cio2_port_errs[i]); +} + static void cio2_irq_handle_once(struct cio2_device *cio2, u32 int_status) { void __iomem *const base = cio2->base; @@ -687,59 +711,32 @@ static void cio2_irq_handle_once(struct cio2_device *cio2, u32 int_status) if (int_status & (CIO2_INT_IOIE | CIO2_INT_IOIRQ)) { /* CSI2 receiver (error) interrupt */ - u32 ie_status, ie_clear; unsigned int port; + u32 ie_status; - ie_clear = readl(base + CIO2_REG_INT_STS_EXT_IE); - ie_status = ie_clear; + ie_status = readl(base + CIO2_REG_INT_STS_EXT_IE); for (port = 0; port < CIO2_NUM_PORTS; port++) { u32 port_status = (ie_status >> (port * 8)) & 0xff; - u32 err_mask = BIT_MASK(ARRAY_SIZE(cio2_port_errs)) - 1; - void __iomem *const csi_rx_base = - base + CIO2_REG_PIPE_BASE(port); - unsigned int i; - - while (port_status & err_mask) { - i = ffs(port_status) - 1; - dev_err(dev, "port %i error %s\n", - port, cio2_port_errs[i]); - ie_status &= ~BIT(port * 8 + i); - port_status &= ~BIT(i); - } + + cio2_irq_log_port_errs(dev, port, port_status); if (ie_status & CIO2_INT_EXT_IE_IRQ(port)) { - u32 csi2_status, csi2_clear; + void __iomem *csi_rx_base = + base + CIO2_REG_PIPE_BASE(port); + u32 csi2_status; csi2_status = readl(csi_rx_base + CIO2_REG_IRQCTRL_STATUS); - csi2_clear = csi2_status; - err_mask = - BIT_MASK(ARRAY_SIZE(cio2_irq_errs)) - 1; - - while (csi2_status & err_mask) { - i = ffs(csi2_status) - 1; - dev_err(dev, - "CSI-2 receiver port %i: %s\n", - port, cio2_irq_errs[i]); - csi2_status &= ~BIT(i); - } - - writel(csi2_clear, - csi_rx_base + CIO2_REG_IRQCTRL_CLEAR); - if (csi2_status) - dev_warn(dev, - "unknown CSI2 error 0x%x on port %i\n", - csi2_status, port); - ie_status &= ~CIO2_INT_EXT_IE_IRQ(port); + cio2_irq_log_irq_errs(dev, port, csi2_status); + + writel(csi2_status, + csi_rx_base + CIO2_REG_IRQCTRL_CLEAR); } } - writel(ie_clear, base + CIO2_REG_INT_STS_EXT_IE); - if (ie_status) - dev_warn(dev, "unknown interrupt 0x%x on IE\n", - ie_status); + writel(ie_status, base + CIO2_REG_INT_STS_EXT_IE); int_status &= ~(CIO2_INT_IOIE | CIO2_INT_IOIRQ); } -- 2.30.2