[PATCH v7 2/2] cec: add One Touch Record Standby tests

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Check that the recording device ignores a Standby message while it is
recording. When the recording is finished, check that the recording device
enters standby unless the recording device is the active source.

Signed-off-by: Deborah Brouwer <deborahbrouwer3563@xxxxxxxxx>
---
 utils/cec-compliance/cec-test-power.cpp | 62 +++++++++++++++++++++++++
 utils/cec-follower/cec-follower.cpp     |  1 +
 utils/cec-follower/cec-follower.h       |  2 +
 utils/cec-follower/cec-processing.cpp   | 14 +++++-
 utils/cec-follower/cec-tuner.cpp        |  9 ++++
 5 files changed, 87 insertions(+), 1 deletion(-)

diff --git a/utils/cec-compliance/cec-test-power.cpp b/utils/cec-compliance/cec-test-power.cpp
index b675bfc4..f23d0414 100644
--- a/utils/cec-compliance/cec-test-power.cpp
+++ b/utils/cec-compliance/cec-test-power.cpp
@@ -677,6 +677,66 @@ static int standby_resume_wakeup_deck_play(struct node *node, unsigned me, unsig
 	return standby_resume_wakeup_deck(node, me, la, interactive, CEC_OP_PLAY_MODE_PLAY_FWD);
 }
 
+static int standby_record(struct node *node, unsigned me, unsigned la, bool interactive, bool active_source)
+{
+	struct cec_msg msg;
+	__u8 rec_status;
+	unsigned unresponsive_time = 0;
+
+	cec_msg_init(&msg, me, la);
+	cec_msg_record_on_own(&msg);
+	msg.reply = CEC_MSG_RECORD_STATUS;
+	fail_on_test(!transmit_timeout(node, &msg, 10000));
+	if (timed_out_or_abort(&msg))
+		return OK_NOT_SUPPORTED;
+	cec_ops_record_status(&msg, &rec_status);
+	fail_on_test(rec_status != CEC_OP_RECORD_STATUS_CUR_SRC &&
+	             rec_status != CEC_OP_RECORD_STATUS_ALREADY_RECORDING);
+
+	cec_msg_init(&msg, me, la);
+	if (active_source)
+		cec_msg_active_source(&msg, node->remote[la].phys_addr);
+	else
+		cec_msg_active_source(&msg, me);
+	fail_on_test(!transmit_timeout(node, &msg));
+
+	cec_msg_init(&msg, me, la);
+	cec_msg_standby(&msg);
+	fail_on_test(!transmit_timeout(node, &msg));
+	/* Standby should not interrupt the recording. */
+	fail_on_test(!poll_stable_power_status(node, me, la, CEC_OP_POWER_STATUS_ON, unresponsive_time));
+
+	cec_msg_init(&msg, me, la);
+	cec_msg_record_off(&msg, false);
+	fail_on_test(!transmit_timeout(node, &msg));
+
+	/* When the recording stops, recorder should standby unless it is the active source. */
+	if (active_source) {
+		fail_on_test(!poll_stable_power_status(node, me, la, CEC_OP_POWER_STATUS_ON, unresponsive_time));
+	} else {
+		fail_on_test(!poll_stable_power_status(node, me, la, CEC_OP_POWER_STATUS_STANDBY, unresponsive_time));
+		fail_on_test(interactive && !question("Is the device in standby?"));
+		node->remote[la].in_standby = true;
+
+		int ret = standby_resume_wakeup(node, me, la, interactive);
+		if (ret)
+			return ret;
+		node->remote[la].in_standby = false;
+	}
+
+	return OK;
+}
+
+static int standby_record_active_source(struct node *node, unsigned me, unsigned la, bool interactive)
+{
+	return standby_record(node, me, la, interactive, true);
+}
+
+static int standby_record_inactive_source(struct node *node, unsigned me, unsigned la, bool interactive)
+{
+	return standby_record(node, me, la, interactive, false);
+}
+
 const vec_remote_subtests standby_resume_subtests{
 	{ "Standby", CEC_LOG_ADDR_MASK_ALL, standby_resume_standby },
 	{ "Repeated Standby message does not wake up", CEC_LOG_ADDR_MASK_ALL, standby_resume_standby_toggle },
@@ -697,4 +757,6 @@ const vec_remote_subtests standby_resume_subtests{
 	{ "Power State Transitions", CEC_LOG_ADDR_MASK_TV, power_state_transitions, false, true },
 	{ "Deck Eject Standby Resume", CEC_LOG_ADDR_MASK_PLAYBACK | CEC_LOG_ADDR_MASK_RECORD, standby_resume_wakeup_deck_eject },
 	{ "Deck Play Standby Resume", CEC_LOG_ADDR_MASK_PLAYBACK | CEC_LOG_ADDR_MASK_RECORD, standby_resume_wakeup_deck_play },
+	{ "Record Standby Active Source", CEC_LOG_ADDR_MASK_RECORD | CEC_LOG_ADDR_MASK_BACKUP, standby_record_active_source },
+	{ "Record Standby Inactive Source", CEC_LOG_ADDR_MASK_RECORD | CEC_LOG_ADDR_MASK_BACKUP, standby_record_inactive_source },
 };
diff --git a/utils/cec-follower/cec-follower.cpp b/utils/cec-follower/cec-follower.cpp
index 482192e7..2816fb85 100644
--- a/utils/cec-follower/cec-follower.cpp
+++ b/utils/cec-follower/cec-follower.cpp
@@ -318,6 +318,7 @@ void state_init(struct node &node)
 	node.state.deck_state = CEC_OP_DECK_INFO_STOP;
 	node.state.deck_skip_start = 0;
 	node.state.one_touch_record_on = false;
+	node.state.record_received_standby = false;
 	tuner_dev_info_init(&node.state);
 	node.state.last_aud_rate_rx_ts = 0;
 }
diff --git a/utils/cec-follower/cec-follower.h b/utils/cec-follower/cec-follower.h
index 8dfbd39f..833dec5e 100644
--- a/utils/cec-follower/cec-follower.h
+++ b/utils/cec-follower/cec-follower.h
@@ -54,6 +54,7 @@ struct state {
 	__u8 deck_state;
 	__u64 deck_skip_start;
 	bool one_touch_record_on;
+	bool record_received_standby;
 	time_t toggle_power_status;
 	__u64 last_aud_rate_rx_ts;
 };
@@ -230,5 +231,6 @@ void process_tuner_record_timer_msgs(struct node *node, struct cec_msg &msg, uns
 void reply_feature_abort(struct node *node, struct cec_msg *msg,
 			 __u8 reason = CEC_OP_ABORT_UNRECOGNIZED_OP);
 void testProcessing(struct node *node, bool wallclock);
+bool enter_standby(struct node *node);
 
 #endif
diff --git a/utils/cec-follower/cec-processing.cpp b/utils/cec-follower/cec-processing.cpp
index e1a71d6c..32375966 100644
--- a/utils/cec-follower/cec-processing.cpp
+++ b/utils/cec-follower/cec-processing.cpp
@@ -146,6 +146,9 @@ void reply_feature_abort(struct node *node, struct cec_msg *msg, __u8 reason)
 
 static bool exit_standby(struct node *node)
 {
+	/* Cancel any standby request that was pending. */
+	node->state.record_received_standby = false;
+
 	if (node->state.power_status == CEC_OP_POWER_STATUS_STANDBY ||
 	    node->state.power_status == CEC_OP_POWER_STATUS_TO_STANDBY) {
 		node->state.old_power_status = node->state.power_status;
@@ -157,14 +160,23 @@ static bool exit_standby(struct node *node)
 	return false;
 }
 
-static bool enter_standby(struct node *node)
+bool enter_standby(struct node *node)
 {
 	if (node->state.power_status == CEC_OP_POWER_STATUS_ON ||
 	    node->state.power_status == CEC_OP_POWER_STATUS_TO_ON) {
+		/*
+		 * Standby should not interrupt a recording in progress, but
+		 * remember to go to standby once the recording is finished.
+		 */
+		if (node->state.one_touch_record_on) {
+			node->state.record_received_standby = true;
+			return false;
+		}
 		node->state.old_power_status = node->state.power_status;
 		node->state.power_status = CEC_OP_POWER_STATUS_STANDBY;
 		node->state.power_status_changed_time = time(nullptr);
 		node->state.deck_skip_start = 0;
+		node->state.record_received_standby = false;
 		dev_info("Changing state to standby\n");
 		return true;
 	}
diff --git a/utils/cec-follower/cec-tuner.cpp b/utils/cec-follower/cec-tuner.cpp
index 13cf6d20..e1d8b8fc 100644
--- a/utils/cec-follower/cec-tuner.cpp
+++ b/utils/cec-follower/cec-tuner.cpp
@@ -724,6 +724,15 @@ void process_tuner_record_timer_msgs(struct node *node, struct cec_msg &msg, uns
 		cec_msg_record_status(&msg, CEC_OP_RECORD_STATUS_TERMINATED_OK);
 		transmit(node, &msg);
 		node->state.one_touch_record_on = false;
+		/*
+		 * If standby was received during recording, enter standby when the
+		 * recording is finished unless recording device is the active source.
+		 */
+		if (node->state.record_received_standby) {
+			if (node->phys_addr != node->state.active_source_pa)
+				enter_standby(node);
+			node->state.record_received_standby = false;
+		}
 		return;
 	case CEC_MSG_RECORD_STATUS:
 		return;
-- 
2.25.1




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux