Re: [PATCH v2 1/3] mx2_camera: Add soc_camera support for i.MX25/i.MX27

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sascha,

On Tue, May 25, 2010 at 03:16:24PM +0200, Sascha Hauer wrote:
> On Mon, May 24, 2010 at 04:20:39PM +0300, Baruch Siach wrote:
> > This is the soc_camera support developed by Sascha Hauer for the i.MX27.  Alan
> > Carvalho de Assis modified the original driver to get it working on more recent
> > kernels. I modified it further to add support for i.MX25. This driver has been
> > tested on i.MX25 and i.MX27 based platforms.
> > 
> > Signed-off-by: Baruch Siach <baruch@xxxxxxxxxx>
> > ---
> >  arch/arm/plat-mxc/include/mach/memory.h  |    4 +-
> >  arch/arm/plat-mxc/include/mach/mx2_cam.h |   46 +
> >  drivers/media/video/Kconfig              |   13 +
> >  drivers/media/video/Makefile             |    1 +
> >  drivers/media/video/mx2_camera.c         | 1471 ++++++++++++++++++++++++++++++
> >  5 files changed, 1533 insertions(+), 2 deletions(-)
> >  create mode 100644 arch/arm/plat-mxc/include/mach/mx2_cam.h
> >  create mode 100644 drivers/media/video/mx2_camera.c
> > 
> 
> [snip]
> 
> > +
> > +static int mclk_get_divisor(struct mx2_camera_dev *pcdev)
> > +{
> > +	dev_info(pcdev->dev, "%s not implemented. Running at max speed\n",
> > +			__func__);
> > +
> > +#if 0
> > +	unsigned int mclk = pcdev->pdata->clk_csi;
> > +	unsigned int pclk = clk_get_rate(pcdev->clk_csi);
> > +	int i;
> > +
> > +	dev_dbg(pcdev->dev, "%s: %ld %ld\n", __func__, mclk, pclk);
> > +
> > +	for (i = 0; i < 0xf; i++)
> > +		if ((i + 1) * 2 * mclk <= pclk)
> > +			break;
> > +	return i;
> > +#endif
> > +	return 0;
> > +}
> 
> This function, if implemented properly, can be used to add an additional
> divider for the sensors master clock. On i.MX27 we can adjust the master
> clock using the clk_set_rate below which is sufficient, so you can
> remove this function completely.

Very good. I'll do this in the next version of this driver.

I guess I can also remove the mclk_get_divisor call at mx2_camera_add_device 
and just leave:

csicr1 = CSICR1_MCLKEN;

Right?

baruch

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch@xxxxxxxxxx - tel: +972.2.679.5364, http://www.tkos.co.il -
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux