Re: [patch v2] video/saa7134: change dprintk() to i2cdprintk()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dan,

On Mon, 24 May 2010 17:59:36 +0200, Dan Carpenter wrote:
> The problem is that dprintk() dereferences "dev" which is null here.
> The i2cdprintk() uses "ir" so that's OK.
> 
> Also removed a duplicated break statement.

Mixing two unrelated fixes in the same patch is a bad idea. Here, the
replacement of dprintk() with i2cdprintk() fixes a potential NULL
pointer dereference, this might be worth backporting to stable kernel
series. The double break, OTOH, can't cause any harm, it's a simple
clean-up. So separate patches would be preferable.

> 
> Signed-off-by: Dan Carpenter <error27@xxxxxxxxx>
> ---
> v2: Jean Delvare suggested that I use i2cdprintk() instead of modifying
> dprintk().
> 
> diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
> index e5565e2..7691bf2 100644
> --- a/drivers/media/video/saa7134/saa7134-input.c
> +++ b/drivers/media/video/saa7134/saa7134-input.c
> @@ -141,8 +141,8 @@ static int get_key_flydvb_trio(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
>  	struct saa7134_dev *dev = ir->c->adapter->algo_data;
>  
>  	if (dev == NULL) {
> -		dprintk("get_key_flydvb_trio: "
> -			 "gir->c->adapter->algo_data is NULL!\n");
> +		i2cdprintk("get_key_flydvb_trio: "
> +			   "gir->c->adapter->algo_data is NULL!\n");
>  		return -EIO;
>  	}
>  
> @@ -195,8 +195,8 @@ static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key,
>  	/* <dev> is needed to access GPIO. Used by the saa_readl macro. */
>  	struct saa7134_dev *dev = ir->c->adapter->algo_data;
>  	if (dev == NULL) {
> -		dprintk("get_key_msi_tvanywhere_plus: "
> -			"gir->c->adapter->algo_data is NULL!\n");
> +		i2cdprintk("get_key_msi_tvanywhere_plus: "
> +			   "gir->c->adapter->algo_data is NULL!\n");
>  		return -EIO;
>  	}
>  
> @@ -815,7 +815,6 @@ int saa7134_input_init1(struct saa7134_dev *dev)
>  		mask_keyup   = 0x020000;
>  		polling      = 50; /* ms */
>  		break;
> -	break;
>  	}
>  	if (NULL == ir_codes) {
>  		printk("%s: Oops: IR config error [card=%d]\n",

Acked-by: Jean Delvare <khali@xxxxxxxxxxxx>

-- 
Jean Delvare
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux