Hi Krzysztof,
Thank you for the patch.
On Tue, Jun 22, 2021 at 01:18:55PM +0200, Krzysztof Hałasa wrote:
> Changes from v1:
> - added power management (power supplies, no chip initialization in
> probe()).
> - added [HV]BLANK v4l2 ctrl interface (the "interval" interface is
> still implemented for better timing control)
> - many fixes, including ones requested by Laurent Pinchart.
>
> The driver has been extensively tested in an i.MX6-based system.
>
> Not yet signed off - this will change of course. Please do not merge
> yet, however comments about being ready (or not) to be merged are
> welcome.
To spend time reviewing this code, I want to know it will be mergeable,
and that requires a SoB line. That's a blocker I'm afraid.
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 462c0e059754..b9ed4dda6beb 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -725,6 +725,16 @@ config VIDEO_APTINA_PLL
> config VIDEO_CCS_PLL
> tristate
>
> +config VIDEO_AR0521
> + tristate "ON Semiconductor AR0521 sensor support"
> + depends on I2C && VIDEO_V4L2
> + help
> + This is a Video4Linux2 sensor driver for the ON Semiconductor
> + AR0521 camera.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called ar0521.
> +
> config VIDEO_HI556
> tristate "Hynix Hi-556 sensor support"
> depends on I2C && VIDEO_V4L2
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index 0c067beca066..66c77848fe0f 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_VIDEO_CX25840) += cx25840/
> obj-$(CONFIG_VIDEO_M5MOLS) += m5mols/
>
> obj-$(CONFIG_VIDEO_APTINA_PLL) += aptina-pll.o
> +obj-$(CONFIG_VIDEO_AR0521) += ar0521.o
> obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
> obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
> obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o
> diff --git a/drivers/media/i2c/ar0521.c b/drivers/media/i2c/ar0521.c
> new file mode 100644
> index 000000000000..b31d8556d3f2
> --- /dev/null
> +++ b/drivers/media/i2c/ar0521.c
> @@ -0,0 +1,1060 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2021 Sieć Badawcza Łukasiewicz * - Przemysłowy Instytut Automatyki i Pomiarów PIAP
> + * Written by Krzysztof Hałasa
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
> +#include <linux/ctype.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/slab.h>
> +#include <linux/types.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/math64.h>
> +#include <linux/regulator/consumer.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-subdev.h>
> +
> +// External clock (xclk) frequencies
> +#define AR0521_XCLK_RATE (27 * 1000 * 1000)
> +#define AR0521_XCLK_MIN (10 * 1000 * 1000)
> +#define AR0521_XCLK_MAX (48 * 1000 * 1000)
> +
> +// PLL and PLL2
> +#define AR0521_PLL_MIN (320 * 1000 * 1000)
> +#define AR0521_PLL_MAX (1280 * 1000 * 1000)
> +
> +// effective pixel clocks, the registers may be DDR
> +#define AR0521_PIXEL_CLOCK_MIN (168 * 1000 * 1000)
> +#define AR0521_PIXEL_CLOCK_MAX (414 * 1000 * 1000)
> +
> +#define AR0521_WIDTH_MIN 8u
> +#define AR0521_WIDTH_MAX 2608u
> +#define AR0521_HEIGHT_MIN 8u
> +#define AR0521_HEIGHT_MAX 1958u
> +
> +#define AR0521_WIDTH_BLANKING_MIN 572u
> +#define AR0521_HEIGHT_BLANKING_MIN 28u // must be even
> +#define AR0521_TOTAL_WIDTH_MIN 2968u
> +
> +// AR0521 registers
> +#define AR0521_REG_VT_PIX_CLK_DIV 0x0300
> +#define AR0521_REG_FRAME_LENGTH_LINES 0x0340
> +
> +#define AR0521_REG_CHIP_ID 0x3000
> +#define AR0521_REG_COARSE_INTEGRATION_TIME 0x3012
> +#define AR0521_REG_ROW_SPEED 0x3016
> +#define AR0521_REG_EXTRA_DELAY 0x3018
> +#define AR0521_REG_RESET 0x301A
> +#define AR0521_REG_RESET_DEFAULTS 0x0238
> +#define AR0521_REG_RESET_GROUP_PARAM_HOLD 0x8000
> +#define AR0521_REG_RESET_STREAM BIT(2)
> +#define AR0521_REG_RESET_RESTART BIT(1)
> +#define AR0521_REG_RESET_INIT BIT(0)
> +
> +#define AR0521_REG_GREEN1_GAIN 0x3056
> +#define AR0521_REG_BLUE_GAIN 0x3058
> +#define AR0521_REG_RED_GAIN 0x305A
> +#define AR0521_REG_GREEN2_GAIN 0x305C
> +#define AR0521_REG_GLOBAL_GAIN 0x305E
> +
> +#define AR0521_REG_HISPI_TEST_MODE 0x3066
> +#define AR0521_REG_HISPI_TEST_MODE_LP11 0x0004
> +
> +#define AR0521_REG_TEST_PATTERN_MODE 0x3070
> +
> +#define AR0521_REG_SERIAL_FORMAT 0x31AE
> +#define AR0521_REG_SERIAL_FORMAT_MIPI 0x0200
> +
> +#define AR0521_REG_HISPI_CONTROL_STATUS 0x31C6
> +#define AR0521_REG_HISPI_CONTROL_STATUS_FRAMER_TEST_MODE_ENABLE 0x80
> +
> +#define be cpu_to_be16
> +
> +// regulator supplies
> +static const char * const ar0521_supply_names[] = {
> + "vdd_io", // I/O (1.8V) supply
> + "vdd_core", // Core, PLL and MIPI (1.2V) supply
> + "vdd_analog", // Analog (2.7V) supply
> +};
> +
> +#define AR0521_NUM_SUPPLIES ARRAY_SIZE(ar0521_supply_names)
> +
> +struct ar0521_ctrls {
> + struct v4l2_ctrl_handler handler;
> + struct v4l2_ctrl *exposure;
> + struct v4l2_ctrl *gain, *red_balance, *blue_balance;
> + struct v4l2_ctrl *test_pattern;
> + struct v4l2_ctrl *hblank, *vblank, *pixrate;
> +};
> +
> +struct ar0521_dev {
> + struct i2c_client *i2c_client;
> + struct v4l2_subdev sd;
> + struct media_pad pad;
> + struct v4l2_fwnode_endpoint ep;
> + struct clk *xclk;
> + u32 xclk_freq;
> +
> + struct regulator *supplies[AR0521_NUM_SUPPLIES];
> + struct gpio_desc *reset_gpio;
> +
> + // lock to protect all members below
> + struct mutex lock;
> +
> + struct v4l2_mbus_framefmt fmt;
> + struct v4l2_fract frame_interval, current_frame_interval;
> + struct ar0521_ctrls ctrls;
> + u32 pix_clk;
> + unsigned int power_count;
> + u16 total_width, total_height, pll_pre, pll_mult, pll_pre2, pll_mult2, extra_delay;
> + bool streaming;
> +};
> +
> +static int debug;
> +module_param(debug, int, 0644);
> +MODULE_PARM_DESC(debug, "Debug level 0-3");
> +
> +static inline struct ar0521_dev *to_ar0521_dev(struct v4l2_subdev *sd)
> +{
> + return container_of(sd, struct ar0521_dev, sd);
> +}
> +
> +static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
> +{
> + return &container_of(ctrl->handler, struct ar0521_dev, ctrls.handler)->sd;
> +}
> +
> +static inline unsigned int lanes(struct ar0521_dev *sensor)
> +{
> + return sensor->ep.bus.mipi_csi2.num_data_lanes;
> +}
> +
> +static const char *mhz(u32 value)
> +{
> + static char buff[32];
> +
> + if (value % 1000)
> + sprintf(buff, "%u.%06u", value / (1000 * 1000), value % (1000 * 1000));
> + else if (value % (1000 * 1000))
> + sprintf(buff, "%u.%03u", value / (1000 * 1000), (value / 1000) % 1000);
> + else
> + sprintf(buff, "%u", value / (1000 * 1000));
> + return buff;
> +}
> +
> +static u32 div64_round(u64 v, u32 d)
> +{
> + return div_u64(v + (d >> 1), d);
> +}
> +
> +static u32 div64_round_up(u64 v, u32 d)
> +{
> + return div_u64(v + d - 1, d);
> +}
> +
> +#define HEX_DUMP_WORDS 8
> +static void dump_i2c(struct ar0521_dev *sensor, const __be16 *data, unsigned int count)
> +{
> + char buffer[5 /* " XXXX" */ * HEX_DUMP_WORDS + 1 /* NUL */];
> + u16 addr;
> + int i;
> +
> + addr = be16_to_cpu(*data++);
> + count--;
> + while (count) {
> + for (i = 0; i < HEX_DUMP_WORDS; i++) {
> + sprintf(buffer + 5 * i, " %04X", be16_to_cpu(*data++));
> + addr += 2;
> + if (!--count)
> + break;
> + }
> + v4l2_dbg(3, debug, &sensor->sd, "WR %04X:%s\n", addr, buffer);
> + }
> +}
> +
> +// data must be BE16, the first value is the register address
> +static int ar0521_write_regs(struct ar0521_dev *sensor, const __be16 *data, unsigned int count)
> +{
> + struct i2c_client *client = sensor->i2c_client;
> + struct i2c_msg msg;
> + int ret;
> +
> + if (!sensor->power_count)
> + return 0;
> +
> + if (debug >= 3)
> + dump_i2c(sensor, data, count);
> +
> + msg.addr = client->addr;
> + msg.flags = client->flags;
> + msg.buf = (u8 *)data;
> + msg.len = count * sizeof(*data);
> +
> + ret = i2c_transfer(client->adapter, &msg, 1);
> + if (ret < 0) {
> + v4l2_err(&sensor->sd, "%s: I2C write error\n", __func__);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int ar0521_write_reg(struct ar0521_dev *sensor, u16 reg, u16 val)
> +{
> + __be16 buf[2] = {be(reg), be(val)};
> +
> + return ar0521_write_regs(sensor, buf, 2);
> +}
> +
> +static int ar0521_set_geometry(struct ar0521_dev *sensor)
> +{
> + // all dimensions are unsigned 12-bit integers
> + u16 x = (AR0521_WIDTH_MAX - sensor->fmt.width) / 2;
> + u16 y = ((AR0521_HEIGHT_MAX - sensor->fmt.height) / 2) & ~1;
> + __be16 regs[] = {
> + be(AR0521_REG_FRAME_LENGTH_LINES),
> + be(sensor->total_height),
> + be(sensor->total_width),
> + be(x),
> + be(y),
> + be(x + sensor->fmt.width - 1),
> + be(y + sensor->fmt.height - 1),
> + be(sensor->fmt.width),
> + be(sensor->fmt.height)
> + };
> +
> + v4l2_dbg(2, debug, &sensor->sd, "ar0521_set_geometry()\n");
> +
> + return ar0521_write_regs(sensor, regs, ARRAY_SIZE(regs));
> +}
> +
> +static int ar0521_set_gains(struct ar0521_dev *sensor)
> +{
> + int green = sensor->ctrls.gain->val;
> + int red = max(green + sensor->ctrls.red_balance->val, 0);
> + int blue = max(green + sensor->ctrls.blue_balance->val, 0);
> + unsigned int gain = min(red, min(green, blue));
> + unsigned int analog = min(gain, 64u); // range is 0 - 127
> + __be16 regs[5];
> +
> + v4l2_dbg(2, debug, &sensor->sd, "ar0521_set_gains()\n");
> +
> + red = min(red - analog + 64, 511u);
> + green = min(green - analog + 64, 511u);
> + blue = min(blue - analog + 64, 511u);
> + regs[0] = be(AR0521_REG_GREEN1_GAIN);
> + regs[1] = be(green << 7 | analog);
> + regs[2] = be(blue << 7 | analog);
> + regs[3] = be(red << 7 | analog);
> + regs[4] = be(green << 7 | analog);
> +
> + return ar0521_write_regs(sensor, regs, ARRAY_SIZE(regs));
> +}
> +
> +static int ar0521_write_mode(struct ar0521_dev *sensor)
> +{
> + __be16 pll_regs[] = {
> + be(AR0521_REG_VT_PIX_CLK_DIV),
> + /* 0x300 */ be(4), // vt_pix_clk_div = number of bits / 2
> + /* 0x302 */ be(1), // vt_sys_clk_div
> + /* 0x304 */ be((sensor->pll_pre2 << 8) | sensor->pll_pre),
> + /* 0x306 */ be((sensor->pll_mult2 << 8) | sensor->pll_mult),
> + /* 0x308 */ be(8), // op_pix_clk_div = 2 * vt_pix_clk_div
> + /* 0x30A */ be(1) // op_sys_clk_div
> + };
> + u32 num = sensor->current_frame_interval.numerator;
> + u32 denom = sensor->current_frame_interval.denominator;
> + int ret;
> +
> + v4l2_dbg(2, debug, &sensor->sd, "ar0521_write_mode()\n");
> +
> + // stop streaming for just a moment
> + ret = ar0521_write_reg(sensor, AR0521_REG_RESET, AR0521_REG_RESET_DEFAULTS);
> + if (ret)
> + return ret;
> +
> + ret = ar0521_set_geometry(sensor);
> + if (ret)
> + return ret;
> +
> + ret = ar0521_write_regs(sensor, pll_regs, ARRAY_SIZE(pll_regs));
> + if (ret)
> + return ret;
> +
> + ret = ar0521_write_reg(sensor, AR0521_REG_COARSE_INTEGRATION_TIME, sensor->ctrls.exposure->val);
> + if (ret)
> + return ret;
> +
> + ret = ar0521_write_reg(sensor, AR0521_REG_EXTRA_DELAY, sensor->extra_delay);
> + if (ret)
> + return ret;
> +
> + ret = ar0521_write_reg(sensor, AR0521_REG_RESET, AR0521_REG_RESET_DEFAULTS | AR0521_REG_RESET_STREAM);
> + if (ret)
> + return ret;
> +
> + ret = ar0521_write_reg(sensor, AR0521_REG_TEST_PATTERN_MODE, sensor->ctrls.test_pattern->val);
> + if (ret)
> + return ret;
> +
> + dev_info(&sensor->i2c_client->dev,
> + "AR0521: %ux%u, total %ux%u, pixel clock %s MHz, %u (%u/%u) FPS\n",
> + sensor->fmt.width, sensor->fmt.height, sensor->total_width, sensor->total_height,
> + mhz(sensor->pix_clk), (num + denom / 2) / denom, num, denom);
> + return 0;
> +}
> +
> +static int ar0521_set_stream(struct ar0521_dev *sensor, bool on)
> +{
> + int ret;
> +
> + v4l2_dbg(2, debug, &sensor->sd, "ar0521_set_stream(%u)\n", on);
> +
> + ret = ar0521_write_mode(sensor);
> + if (ret)
> + return ret;
> +
> + if (on) {
> + ret = ar0521_set_gains(sensor);
> + if (ret)
> + return ret;
> +
> + // normal output on clock and data lanes
> + ret = ar0521_write_reg(sensor, AR0521_REG_HISPI_CONTROL_STATUS, 0);
> + if (ret)
> + return ret;
> + } else {
> + // reset gain, the sensor may produce all white pixels without this
> + ret = ar0521_write_reg(sensor, AR0521_REG_GLOBAL_GAIN, 0x2000);
> + if (ret)
> + return ret;
> +
> + // set LP-11 on clock and data lanes
> + ret = ar0521_write_reg(sensor, AR0521_REG_HISPI_CONTROL_STATUS,
> + AR0521_REG_HISPI_CONTROL_STATUS_FRAMER_TEST_MODE_ENABLE);
> + if (ret)
> + return ret;
> + }
> +
> + // start streaming (possibly with LP-11 on all lines)
> + return ar0521_write_reg(sensor, AR0521_REG_RESET,
> + AR0521_REG_RESET_DEFAULTS |
> + AR0521_REG_RESET_RESTART |
> + AR0521_REG_RESET_STREAM);
> +}
> +
> +static u32 calc_pll(struct ar0521_dev *sensor, int num, u32 freq, u16 *pre_ptr, u16 *mult_ptr)
> +{
> + u16 pre = 1, mult = 1, new_pre;
> + u32 pll = AR0521_PLL_MAX + 1;
> +
> + for (new_pre = 1; new_pre < 64; new_pre++) {
> + u32 new_pll;
> + u32 new_mult = div64_round_up((u64)freq * new_pre, sensor->xclk_freq);
> +
> + if (new_mult < 32)
> + continue; // minimum value
> + if (new_mult > 254)
> + break; // maximum, larger pre won't work either
> + if (sensor->xclk_freq * (u64)new_mult < AR0521_PLL_MIN * new_pre)
> + continue;
> + if (sensor->xclk_freq * (u64)new_mult > AR0521_PLL_MAX * new_pre)
> + break; // larger pre won't work either
> + new_pll = div64_round_up(sensor->xclk_freq * (u64)new_mult, new_pre);
> + if (new_pll < pll) {
> + pll = new_pll;
> + pre = new_pre;
> + mult = new_mult;
> + }
> + }
> +
> + pll = div64_round(sensor->xclk_freq * (u64)mult, pre);
> + *pre_ptr = pre;
> + *mult_ptr = mult;
> + return pll;
> +}
> +
> +static void ar0521_adj_fmt(struct v4l2_mbus_framefmt *fmt)
> +{
> + fmt->width = clamp(ALIGN(fmt->width, 4), AR0521_WIDTH_MIN, AR0521_WIDTH_MAX);
> + fmt->height = clamp(ALIGN(fmt->height, 4), AR0521_HEIGHT_MIN, AR0521_HEIGHT_MAX);
> + fmt->code = MEDIA_BUS_FMT_SGRBG8_1X8;
> + fmt->field = V4L2_FIELD_NONE;
> + fmt->colorspace = V4L2_COLORSPACE_SRGB;
> + fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> + fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
> + fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT;
> +}
> +
> +#define DIV 4
> +static void ar0521_calc_mode(struct ar0521_dev *sensor)
> +{
> + unsigned int speed_mod = 4 / lanes(sensor); // 1 with 4 DDR lanes
> + u64 pix_clk; // for calculations
> + u32 pixels, num, denom, new_total_height, new_pixels;
> + u16 total_width, total_height;
> +
> + total_width = max(sensor->fmt.width + AR0521_WIDTH_BLANKING_MIN, AR0521_TOTAL_WIDTH_MIN);
> + total_height = sensor->fmt.height + AR0521_HEIGHT_BLANKING_MIN;
> +
> + pixels = total_width * total_height;
> + num = sensor->frame_interval.numerator;
> + denom = sensor->frame_interval.denominator;
> +
> + // calculate approximate pixel clock first
> + pix_clk = div64_round_up(pixels * (u64)num, denom);
> + if (pix_clk > AR0521_PIXEL_CLOCK_MAX) {
> + u32 cnt;
> + // have to recalculate FPS
> + num = pix_clk = AR0521_PIXEL_CLOCK_MAX;
> + denom = pixels;
> + // try to reduce the numbers a bit
> + for (cnt = 2; cnt * cnt < denom; cnt++)
> + while (num % cnt == 0 && denom % cnt == 0) {
> + num /= cnt;
> + denom /= cnt;
> + }
> + } else if (pix_clk < AR0521_PIXEL_CLOCK_MIN)
> + // we will compensate with total_height and extra_delay
> + pix_clk = AR0521_PIXEL_CLOCK_MIN;
> +
> + sensor->current_frame_interval.numerator = num;
> + sensor->current_frame_interval.denominator = denom;
> +
> + // PLL1 drives pixel clock - dual rate
> + pix_clk = calc_pll(sensor, 1, pix_clk * (DIV / 2), &sensor->pll_pre, &sensor->pll_mult);
> + pix_clk = div64_round(pix_clk, (DIV / 2));
> + calc_pll(sensor, 2, pix_clk * (DIV / 2) * speed_mod, &sensor->pll_pre2, &sensor->pll_mult2);
> +
> + // let's see if we can do better
> + new_total_height = (div64_round((u64)pix_clk * denom, num) / total_width) & ~1; // must be even
> + if (new_total_height > total_height) {
> + total_height = new_total_height;
> + pixels = total_width * total_height;
> + }
> +
> + // maybe there is still room for improvement
> + new_pixels = div64_round(pix_clk * denom, num);
> + sensor->extra_delay = 0;
> + if (new_pixels > pixels)
> + sensor->extra_delay = new_pixels - pixels;
> +
> + sensor->pix_clk = pix_clk;
> + sensor->total_width = total_width;
> + sensor->total_height = total_height;
> +}
> +
> +static int ar0521_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *format)
> +{
> + struct ar0521_dev *sensor = to_ar0521_dev(sd);
> + struct v4l2_mbus_framefmt *fmt;
> +
> + if (format->pad)
> + return -EINVAL;
> +
> + v4l2_dbg(1, debug, &sensor->sd, "ar0521_get_fmt(%u)\n", format->which);
> +
> + mutex_lock(&sensor->lock);
> +
> + if (format->which == V4L2_SUBDEV_FORMAT_TRY)
> + fmt = v4l2_subdev_get_try_format(&sensor->sd, cfg, 0 /* pad */);
> + else
> + fmt = &sensor->fmt;
> +
> + format->format = *fmt;
> +
> + mutex_unlock(&sensor->lock);
> + return 0;
> +}
> +
> +static int ar0521_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *format)
> +{
> + struct ar0521_dev *sensor = to_ar0521_dev(sd);
> + int ret = 0;
> +
> + if (format->pad)
> + return -EINVAL;
> +
> + v4l2_dbg(1, debug, &sensor->sd, "ar0521_set_fmt(%u)\n", format->which);
> +
> + ar0521_adj_fmt(&format->format);
> +
> + mutex_lock(&sensor->lock);
> +
> + if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
> + struct v4l2_mbus_framefmt *fmt;
> +
> + fmt = v4l2_subdev_get_try_format(sd, cfg, 0 /* pad */);
> + *fmt = format->format;
> + } else {
> + sensor->fmt = format->format;
> + ar0521_calc_mode(sensor);
> + ret = ar0521_write_mode(sensor);
> + }
> +
> + mutex_unlock(&sensor->lock);
> + return ret;
> +}
> +
> +static int ar0521_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
> + struct ar0521_dev *sensor = to_ar0521_dev(sd);
> + int ret;
> +
> + // v4l2_ctrl_lock() locks our own mutex
> +
> + v4l2_dbg(1, debug, &sensor->sd, "ar0521_s_ctrl(0x%X)\n", ctrl->id);
> +
> + switch (ctrl->id) {
> + case V4L2_CID_HBLANK:
> + case V4L2_CID_VBLANK:
> + sensor->total_width = sensor->fmt.width + sensor->ctrls.hblank->val;
> + sensor->total_height = sensor->fmt.width + sensor->ctrls.vblank->val;
> + ret = ar0521_set_geometry(sensor);
> + break;
> + case V4L2_CID_GAIN:
> + case V4L2_CID_RED_BALANCE:
> + case V4L2_CID_BLUE_BALANCE:
> + ret = ar0521_set_gains(sensor);
> + break;
> + case V4L2_CID_EXPOSURE:
> + ret = ar0521_write_reg(sensor, AR0521_REG_COARSE_INTEGRATION_TIME, ctrl->val);
> + break;
> + case V4L2_CID_TEST_PATTERN:
> + ret = ar0521_write_reg(sensor, AR0521_REG_TEST_PATTERN_MODE, ctrl->val);
> + break;
> + default:
> + ret = -EINVAL;
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops ar0521_ctrl_ops = {
> + .s_ctrl = ar0521_s_ctrl,
> +};
> +
> +static const char * const test_pattern_menu[] = {
> + "Disabled",
> + "Solid color",
> + "Color bars",
> + "Faded color bars"
> +};
> +
> +static int ar0521_init_controls(struct ar0521_dev *sensor)
> +{
> + const struct v4l2_ctrl_ops *ops = &ar0521_ctrl_ops;
> + struct ar0521_ctrls *ctrls = &sensor->ctrls;
> + struct v4l2_ctrl_handler *hdl = &ctrls->handler;
> + int ret;
> +
> + v4l2_ctrl_handler_init(hdl, 32);
> +
> + // we can use our own mutex for the ctrl lock
> + hdl->lock = &sensor->lock;
> +
> + // manual gain
> + ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN, 0, 511, 1, 0);
> + ctrls->red_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_RED_BALANCE, -512, 511, 1, 0);
> + ctrls->blue_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BLUE_BALANCE, -512, 511, 1, 0);
> +
> + // alternate for frame interval
> + ctrls->hblank = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HBLANK, AR0521_WIDTH_BLANKING_MIN, 4094, 1, AR0521_WIDTH_BLANKING_MIN);
> + ctrls->vblank = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VBLANK, AR0521_HEIGHT_BLANKING_MIN, 4094, 2, AR0521_HEIGHT_BLANKING_MIN);
> + // Read-only
> + ctrls->pixrate = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_PIXEL_RATE, AR0521_PIXEL_CLOCK_MIN, AR0521_PIXEL_CLOCK_MAX, 1, AR0521_PIXEL_CLOCK_MIN);
> +
> + // manual exposure time
> + ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE, 0, 65535, 1, 0);
> +
> + ctrls->test_pattern = v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_TEST_PATTERN,
> + ARRAY_SIZE(test_pattern_menu) - 1,
> + 0, 0, test_pattern_menu);
> +
> + if (hdl->error) {
> + ret = hdl->error;
> + goto free_ctrls;
> + }
> +
> + sensor->sd.ctrl_handler = hdl;
> + return 0;
> +
> +free_ctrls:
> + v4l2_ctrl_handler_free(hdl);
> + return ret;
> +}
> +
> +static const struct initial_reg {
> + u16 addr, value;
> +} initial_regs[] = {
> + // corrections_recommended_bayer
> + {0x3042, 0x0004}, // RNC:enable b/w rnc mode
> + {0x3044, 0x4580}, // RNC:enable row noise correction
> + {0x30EE, 0x1136}, // RNC:rnc scaling factor-->initial recommended setting
> + {0x3120, 0x0001}, // recommended setting for dither
> + {0x3F2C, 0x442E}, // GTH_THRES_RTN: 7max,7min filtered out of every 46
> + {0x30D2, 0x0000}, // CRM/CC: enable crm on Visible and CC rows
> + {0x30D4, 0x0000}, // CC: CC enabled with 16 samples per column
> + {0x30D6, 0x2FFF}, // CC: bw mode enabled/12 bit data resolution/bw mode
> + {0x30DA, 0x0FFF}, // CC: column correction clip level 2 is 0
> + {0x30DC, 0x0FFF}, // CC: column correction clip level 3 is 0
> + {0x30DE, 0x0000}, // CC: Group FPN correction
> + {0x31E0, 0x0781}, // Fuse/2DDC: enable 2ddc
> + {0x3180, 0x9434}, // FDOC:fdoc settings with fdoc every frame turned of
> + {0x3172, 0x0206}, // txlo clk divider options
> + {0x3F00, 0x0017}, // BM_T0
> + {0x3F02, 0x02DD}, // BM_T1
> + {0x3F04, 0x0020}, // if Ana_gain less than 2, use noise_floor0, multipl
> + {0x3F06, 0x0040}, // if Ana_gain between 4 and 7, use noise_floor2 and
> + {0x3F08, 0x0070}, // if Ana_gain between 4 and 7, use noise_floor2 and
> + {0x3F0A, 0x0101}, // Define noise_floor0(low address) and noise_floor1
> + {0x3F0C, 0x0302}, // Define noise_floor2 and noise_floor3
> + {0x3F1E, 0x0022},
> + {0x3F1A, 0x01FF}, // cross factor 2
> + {0x3F14, 0x0505}, // single k factor 2
> + {0x3F44, 0x0707}, // couple k factor 2
> + {0x3F18, 0x01FF}, // cross factor 1
> + {0x3F12, 0x0505}, // single k factor 1
> + {0x3F42, 0x1511}, // couple k factor 1
> + {0x3F16, 0x01FF}, // cross factor 0
> + {0x3F10, 0x0505}, // single k factor 0
> + {0x3F40, 0x1511}, // couple k factor 0
> +
> + // analog_setup_recommended_12bit
> + {0x3EB6, 0x004C}, // ECL
> + {0x3EBA, 0xAAAA},
> + {0x3EBC, 0x0086}, // Bias currents for FSC/ECL
> + {0x3EC0, 0x1E00}, // SFbin/SH mode settings
> + {0x3EC2, 0x100B}, // CLK divider for ramp for 12 bit 400MHz mode only
> + {0x3EC4, 0x3300}, // FSC clamps for HDR mode and adc comp power down co
> + {0x3EC6, 0xEA44}, // VLN and clk gating controls
> + {0x3EC8, 0x6F6F}, // Txl0 and Txlo1 settings for normal mode
> + {0x3ECA, 0x2F4A}, // CDAC/Txlo2/RSTGHI/RSTGLO settings
> + {0x3ECC, 0x0506}, // RSTDHI/RSTDLO/CDAC/TXHI settings
> + {0x3ECE, 0x203B}, // Ramp buffer settings and Booster enable (bits 0-5)
> + {0x3ED0, 0x13F0}, // TXLO from atest/sf bin settings
> + {0x3ED2, 0x9A3D}, // Booster settings for reference rows/columns
> + {0x3ED4, 0x862F}, // TXLO open loop/row driver settings
> + {0x3ED6, 0x4081}, // Txlatch fr cfpn rows/vln bias
> + {0x3ED8, 0x4003}, // Ramp step setting for 12 bit 400 Mhz mode
> + {0x3EDA, 0x9A80}, // ramp offset for T1/normal and rst under range
> + {0x3EDC, 0xC000}, // over range for rst and under range for sig
> + {0x3EDE, 0xC103}, // over range for sig and col dec clk settings
> + {0x3426, 0x1600}, // ADC offset distribution pulse
> + {0x342A, 0x0038}, // pulse_config
> + {0x3F3E, 0x0001}, // Switch ADC from 10 bit to 12 bit mode
> + {0x341A, 0x6051},
> + {0x3420, 0x6051},
> +
> + // analog_setup_recommended_10bit
> + {0x3EC2, 0x100A}, // CLK divider for ramp for 10 bit 400MH
> + {0x3ED8, 0x8003}, // Ramp step setting for 10 bit 400 Mhz
> + {0x341A, 0x4735}, // Samp&Hold pulse in ADC
> + {0x3420, 0x4735}, // Samp&Hold pulse in ADC
> + {0x3426, 0x8A1A}, // ADC offset distribution pulse
> + {0x342A, 0x0018}, // pulse_config
> + {0x3ED2, 0xA53D}, // Ramp offset
> + {0x3EDA, 0xA580}, // Ramp Offset
> + {0x3EBA, 0xAAAD},
> + {0x3EB6, 0x004C},
> + {0x3F3E, 0x0000}, // Switch ADC from 12 bit to 10 bit mode
> +
> + // new RNC 10bit
> + {0x30EE, 0x1136}, // RNC:rnc scaling factor=*54/64 (32/38*64=53.9)
> + {0x3F2C, 0x442E}, // GTH_THRES_RTN: 4max,4min filtered out of every 46 samples and
> + // for 10bit mode
> + {0x301E, 0x00AA}, // PEDESTAL+2 :+2 is a workaround for 10bit mode +0.5 Rounding
> + {0x3120, 0x0005}, // p1 dither enabled for 10bit mode
> +
> + {0x0112, 0x0808}, // 8-bit/8-bit mode
> + {0x31BC, 0x068C}, // don't use continuous clock mode while shut down
> + {0x30FA, 0xFD00}, // GPIO0 = flash, GPIO1 = shutter
> + {0x31B0, 0x008B}, // frame_preamble - FIXME check WRT lanes#
> + {0x31B2, 0x0050}, // line_preamble - FIXME check WRT lanes#
> +};
> +
> +static __be16 pixel_timing_recommended[] = {
> + be(0x3D00), // first register address
> + /* 3D00 */ be(0x043E), be(0x4760), be(0xFFFF), be(0xFFFF), be(0x8000), be(0x0510), be(0xAF08), be(0x0252),
> + /* 3D10 */ be(0x486F), be(0x5D5D), be(0x8056), be(0x8313), be(0x0087), be(0x6A48), be(0x6982), be(0x0280),
> + /* 3D20 */ be(0x8359), be(0x8D02), be(0x8020), be(0x4882), be(0x4269), be(0x6A95), be(0x5988), be(0x5A83),
> + /* 3D30 */ be(0x5885), be(0x6280), be(0x6289), be(0x6097), be(0x5782), be(0x605C), be(0xBF18), be(0x0961),
> + /* 3D40 */ be(0x5080), be(0x2090), be(0x4390), be(0x4382), be(0x5F8A), be(0x5D5D), be(0x9C63), be(0x8063),
> + /* 3D50 */ be(0xA960), be(0x9757), be(0x8260), be(0x5CFF), be(0xBF10), be(0x1681), be(0x0802), be(0x8000),
> + /* 3D60 */ be(0x141C), be(0x6000), be(0x6022), be(0x4D80), be(0x5C97), be(0x6A69), be(0xAC6F), be(0x4645),
> + /* 3D70 */ be(0x4400), be(0x0513), be(0x8069), be(0x6AC6), be(0x5F95), be(0x5F70), be(0x8040), be(0x4A81),
> + /* 3D80 */ be(0x0300), be(0xE703), be(0x0088), be(0x4A83), be(0x40FF), be(0xFFFF), be(0xFD70), be(0x8040),
> + /* 3D90 */ be(0x4A85), be(0x4FA8), be(0x4F8C), be(0x0070), be(0xBE47), be(0x8847), be(0xBC78), be(0x6B89),
> + /* 3DA0 */ be(0x6A80), be(0x6986), be(0x6B8E), be(0x6B80), be(0x6980), be(0x6A88), be(0x7C9F), be(0x866B),
> + /* 3DB0 */ be(0x8765), be(0x46FF), be(0xE365), be(0xA679), be(0x4A40), be(0x4580), be(0x44BC), be(0x7000),
> + /* 3DC0 */ be(0x8040), be(0x0802), be(0x10EF), be(0x0104), be(0x3860), be(0x5D5D), be(0x5682), be(0x1300),
> + /* 3DD0 */ be(0x8648), be(0x8202), be(0x8082), be(0x598A), be(0x0280), be(0x2048), be(0x3060), be(0x8042),
> + /* 3DE0 */ be(0x9259), be(0x865A), be(0x8258), be(0x8562), be(0x8062), be(0x8560), be(0x9257), be(0x8221),
> + /* 3DF0 */ be(0x10FF), be(0xB757), be(0x9361), be(0x1019), be(0x8020), be(0x9043), be(0x8E43), be(0x845F),
> + /* 3E00 */ be(0x835D), be(0x805D), be(0x8163), be(0x8063), be(0xA060), be(0x9157), be(0x8260), be(0x5CFF),
> + /* 3E10 */ be(0xFFFF), be(0xFFE5), be(0x1016), be(0x2048), be(0x0802), be(0x1C60), be(0x0014), be(0x0060),
> + /* 3E20 */ be(0x2205), be(0x8120), be(0x908F), be(0x6A80), be(0x6982), be(0x5F9F), be(0x6F46), be(0x4544),
> + /* 3E30 */ be(0x0005), be(0x8013), be(0x8069), be(0x6A80), be(0x7000), be(0x0000), be(0x0000), be(0x0000),
> + /* 3E40 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000),
> + /* 3E50 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000),
> + /* 3E60 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000),
> + /* 3E70 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000),
> + /* 3E80 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000),
> + /* 3E90 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000),
> + /* 3EA0 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000),
> + /* 3EB0 */ be(0x0000), be(0x0000), be(0x0000)};
> +
> +static void ar0521_power_off(struct ar0521_dev *sensor)
> +{
> + int i;
> +
> + v4l2_dbg(1, debug, &sensor->sd, "ar0521_power_off()\n");
> + clk_disable_unprepare(sensor->xclk);
> +
> + if (sensor->reset_gpio)
> + gpiod_set_value(sensor->reset_gpio, 1); // assert RESET signal
> +
> + for (i = AR0521_NUM_SUPPLIES - 1; i >= 0; i--) {
> + if (sensor->supplies[i])
> + regulator_disable(sensor->supplies[i]);
> + }
> +}
> +
> +static int ar0521_power_on(struct ar0521_dev *sensor)
> +{
> + int i, ret;
> + unsigned int nlanes = lanes(sensor);
> +
> + v4l2_dbg(1, debug, &sensor->sd, "ar0521_power_on()\n");
> + for (i = 0; i < AR0521_NUM_SUPPLIES; i++)
> + if (sensor->supplies[i]) {
> + ret = regulator_enable(sensor->supplies[i]);
> + if (ret < 0)
> + goto off;
> +
> + usleep_range(1000, 1500); // min 1 ms
> + }
> +
> + ret = clk_prepare_enable(sensor->xclk);
> + if (ret < 0) {
> + v4l2_err(&sensor->sd, "error enabling sensor clock\n");
> + goto off;
> + }
> + usleep_range(1000, 1500); // min 1 ms
> +
> + if (sensor->reset_gpio)
> + gpiod_set_value(sensor->reset_gpio, 0); // deassert RESET signal
> + usleep_range(4500, 5000); // min 45000 clocks
> +
> + for (i = 0; i < ARRAY_SIZE(initial_regs); i++)
> + if (ar0521_write_reg(sensor, initial_regs[i].addr, initial_regs[i].value))
> + goto off;
> +
> + ret = ar0521_write_regs(sensor, pixel_timing_recommended, ARRAY_SIZE(pixel_timing_recommended));
> + if (ret)
> + goto off;
> +
> + ret = ar0521_write_reg(sensor, AR0521_REG_SERIAL_FORMAT, AR0521_REG_SERIAL_FORMAT_MIPI | nlanes);
> + if (ret)
> + goto off;
> +
> + // set MIPI test mode - disabled for now
> + ret = ar0521_write_reg(sensor, AR0521_REG_HISPI_TEST_MODE,
> + ((0x40 << nlanes) - 0x40) | AR0521_REG_HISPI_TEST_MODE_LP11);
> + if (ret)
> + goto off;
> +
> + ret = ar0521_write_reg(sensor, AR0521_REG_ROW_SPEED, 0x110 | 4 / nlanes);
> + if (ret)
> + goto off;
> +
> + ar0521_calc_mode(sensor);
> +
> + ret = ar0521_set_stream(sensor, 0);
> + if (ret)
> + goto off;
> +
> + return 0;
> +off:
> + ar0521_power_off(sensor);
> + return ret;
> +}
> +
> +static int ar0521_s_power(struct v4l2_subdev *sd, int on)
> +{
> + struct ar0521_dev *sensor = to_ar0521_dev(sd);
> +
> + v4l2_dbg(1, debug, &sensor->sd, "ar0521_s_power(%u, %s)\n", sensor->power_count, on ? "on" : "off");
> +
> + if (on) {
> + if (!sensor->power_count++) {
> + int ret = ar0521_power_on(sensor);
> + if (ret) {
> + sensor->power_count = 0; // undo
> + return ret;
> + }
> + }
> + } else if (!--sensor->power_count)
> + ar0521_power_off(sensor);
> +
> + return 0;
> +}
> +
> +static int ar0521_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_mbus_code_enum *code)
> +{
> + struct ar0521_dev *sensor = to_ar0521_dev(sd);
> +
> + if (code->pad || code->index)
> + return -EINVAL;
> +
> + code->code = sensor->fmt.code;
> + v4l2_dbg(1, debug, &sensor->sd, "ar0521_enum_mbus_code() = %X\n", code->code);
> + return 0;
> +}
> +
> +static int ar0521_g_frame_interval(struct v4l2_subdev *sd, struct v4l2_subdev_frame_interval *fi)
> +{
> + struct ar0521_dev *sensor = to_ar0521_dev(sd);
> +
> + mutex_lock(&sensor->lock);
> + fi->interval = sensor->current_frame_interval;
> + mutex_unlock(&sensor->lock);
> + v4l2_dbg(1, debug, &sensor->sd, "ar0521_g_frame_interval() = %u/%u\n",
> + fi->interval.numerator, fi->interval.denominator);
> + return 0;
> +}
> +
> +static int ar0521_s_frame_interval(struct v4l2_subdev *sd, struct v4l2_subdev_frame_interval *fi)
> +{
> + struct ar0521_dev *sensor = to_ar0521_dev(sd);
> + int ret;
> +
> + if (fi->pad)
> + return -EINVAL;
> +
> + v4l2_dbg(1, debug, &sensor->sd, "ar0521_s_frame_interval(%u/%u)\n",
> + fi->interval.numerator, fi->interval.denominator);
> + mutex_lock(&sensor->lock);
> +
> + if (sensor->streaming) {
> + ret = -EBUSY;
> + goto out;
> + }
> +
> + sensor->frame_interval = fi->interval;
> + ar0521_calc_mode(sensor);
> + ret = ar0521_write_mode(sensor);
> +out:
> + mutex_unlock(&sensor->lock);
> + return ret;
> +}
> +
> +static int ar0521_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> + struct ar0521_dev *sensor = to_ar0521_dev(sd);
> + int ret;
> +
> + v4l2_dbg(1, debug, &sensor->sd, "ar0521_s_stream(%i)\n", enable);
> + mutex_lock(&sensor->lock);
> +
> + ret = ar0521_set_stream(sensor, enable);
> + sensor->streaming = enable;
> +
> + mutex_unlock(&sensor->lock);
> + return ret;
> +}
> +
> +static const struct v4l2_subdev_core_ops ar0521_core_ops = {
> + .log_status = v4l2_ctrl_subdev_log_status,
> + .s_power = ar0521_s_power,
> + .subscribe_event = v4l2_ctrl_subdev_subscribe_event,
> + .unsubscribe_event = v4l2_event_subdev_unsubscribe,
> +};
> +
> +static const struct v4l2_subdev_video_ops ar0521_video_ops = {
> + .g_frame_interval = ar0521_g_frame_interval,
> + .s_frame_interval = ar0521_s_frame_interval,
> + .s_stream = ar0521_s_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops ar0521_pad_ops = {
> + .enum_mbus_code = ar0521_enum_mbus_code,
> + .get_fmt = ar0521_get_fmt,
> + .set_fmt = ar0521_set_fmt,
> +};
> +
> +static const struct v4l2_subdev_ops ar0521_subdev_ops = {
> + .core = &ar0521_core_ops,
> + .video = &ar0521_video_ops,
> + .pad = &ar0521_pad_ops,
> +};
> +
> +static int ar0521_probe(struct i2c_client *client, const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct fwnode_handle *endpoint;
> + struct ar0521_dev *sensor;
> + unsigned int cnt, nlanes;
> + int ret;
> +
> + v4l2_dbg(1, debug, client, "ar0521_probe()\n");
> + sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
> + if (!sensor)
> + return -ENOMEM;
> +
> + sensor->i2c_client = client;
> + sensor->fmt.code = MEDIA_BUS_FMT_SGRBG8_1X8;
> + sensor->fmt.width = AR0521_WIDTH_MAX;
> + sensor->fmt.height = AR0521_HEIGHT_MAX;
> + sensor->fmt.field = V4L2_FIELD_NONE;
> + sensor->frame_interval.numerator = 30;
> + sensor->frame_interval.denominator = 1;
> +
> + endpoint = fwnode_graph_get_next_endpoint(of_fwnode_handle(dev->of_node), NULL);
> + if (!endpoint) {
> + dev_err(dev, "endpoint node not found\n");
> + return -EINVAL;
> + }
> +
> + ret = v4l2_fwnode_endpoint_parse(endpoint, &sensor->ep);
> + fwnode_handle_put(endpoint);
> + if (ret) {
> + dev_err(dev, "could not parse endpoint\n");
> + return ret;
> + }
> +
> + if (sensor->ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
> + dev_err(dev, "invalid bus type, must be MIPI CSI2\n");
> + return -EINVAL;
> + }
> +
> + nlanes = lanes(sensor);
> + switch (nlanes) {
> + case 1:
> + case 2:
> + case 4:
> + break;
> + default:
> + dev_err(dev, "invalid number of MIPI data lane%s\n", nlanes > 1 ? "s" : "");
> + return -EINVAL;
> + }
> +
> + // get master clock (xclk)
> + sensor->xclk = devm_clk_get(dev, "xclk");
> + if (IS_ERR(sensor->xclk)) {
> + dev_err(dev, "failed to get xclk\n");
> + return PTR_ERR(sensor->xclk);
> + }
> +
> + ret = clk_set_rate(sensor->xclk, AR0521_XCLK_RATE);
> + if (ret < 0) {
> + dev_err(dev, "error setting clock rate\n");
> + return ret;
> + }
> +
> + sensor->xclk_freq = clk_get_rate(sensor->xclk);
> +
> + if (sensor->xclk_freq < AR0521_XCLK_MIN ||
> + sensor->xclk_freq > AR0521_XCLK_MAX) {
> + dev_err(dev, "xclk frequency out of range: %u Hz\n", sensor->xclk_freq);
> + return -EINVAL;
> + }
> +
> + // request optional reset pin (usually active low) and assert it
> + sensor->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> +
> + v4l2_i2c_subdev_init(&sensor->sd, client, &ar0521_subdev_ops);
> +
> + sensor->sd.flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
> + sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
> + sensor->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> + ret = media_entity_pads_init(&sensor->sd.entity, 1, &sensor->pad);
> + if (ret)
> + return ret;
> +
> + for (cnt = 0; cnt < AR0521_NUM_SUPPLIES; cnt++) {
> + struct regulator *supply = devm_regulator_get_optional(dev, ar0521_supply_names[cnt]);
> + if (!IS_ERR(supply))
> + sensor->supplies[cnt] = supply;
> + }
> +
> + mutex_init(&sensor->lock);
> +
> + ret = ar0521_init_controls(sensor);
> + if (ret)
> + goto entity_cleanup;
> +
> + ret = v4l2_async_register_subdev(&sensor->sd);
> + if (ret)
> + goto free_ctrls;
> +
> + ar0521_adj_fmt(&sensor->fmt);
> +
> + dev_info(dev, "AR0521 driver initialized, master clock frequency: %s MHz, %u MIPI data lanes\n",
> + mhz(sensor->xclk_freq), nlanes);
> + return 0;
> +
> +free_ctrls:
> + v4l2_ctrl_handler_free(&sensor->ctrls.handler);
> +entity_cleanup:
> + media_entity_cleanup(&sensor->sd.entity);
> + mutex_destroy(&sensor->lock);
> + return ret;
> +}
> +
> +static int ar0521_remove(struct i2c_client *client)
> +{
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct ar0521_dev *sensor = to_ar0521_dev(sd);
> +
> + v4l2_async_unregister_subdev(&sensor->sd);
> + media_entity_cleanup(&sensor->sd.entity);
> + v4l2_ctrl_handler_free(&sensor->ctrls.handler);
> + mutex_destroy(&sensor->lock);
> + return 0;
> +}
> +
> +static const struct i2c_device_id ar0521_id[] = {
> + {"ar0521", 0},
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, ar0521_id);
> +
> +static const struct of_device_id ar0521_dt_ids[] = {
> + {.compatible = "onnn,ar0521"},
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, ar0521_dt_ids);
> +
> +static struct i2c_driver ar0521_i2c_driver = {
> + .driver = {
> + .name = "ar0521",
> + .of_match_table = ar0521_dt_ids,
> + },
> + .id_table = ar0521_id,
> + .probe = ar0521_probe,
> + .remove = ar0521_remove,
> +};
> +
> +module_i2c_driver(ar0521_i2c_driver);
> +
> +MODULE_DESCRIPTION("AR0521 MIPI Camera subdev driver");
> +MODULE_AUTHOR("Krzysztof Hałasa <khalasa@xxxxxxx>");
> +MODULE_LICENSE("GPL");
--
Regards,
Laurent Pinchart
