Hi Guennadi, On Mon, May 24, 2010 at 03:34:32PM +0200, Guennadi Liakhovetski wrote: > On Mon, 24 May 2010, Baruch Siach wrote: > > > This series contains a soc_camera driver for the i.MX25/i.MX27 CSI device, and > > platform code for the i.MX25 and i.MX27 chips. This driver is based on a > > driver for i.MX27 CSI from Sascha Hauer, that Alan Carvalho de Assis has > > posted in linux-media last December[1]. I tested the mx2_camera driver on the > > i.MX25 PDK. Sascha Hauer has tested a earlier version of this driver on an > > i.MX27 based board. I included in this version some fixes from Sascha that > > enable i.MX27 support. > > > > [1] https://patchwork.kernel.org/patch/67636/ > > Thanks for the patches! I'll have a look at them in the next couple of > days. I presume, you do not expect this driver to make it into 2.6.35? rc1 > is expected any time now, so, we'll take our time and prepare it for > 2.6.36, right? I don't expect this driver to be in 2.6.35. It's not that urgent. This code should also do some time in -next. Thanks for your continued support. baruch > > > > Changes v1 -> v2 > > Addressed the comments of Guennadi Liakhovetski except from the following: > > > > 1. The mclk_get_divisor implementation, since I don't know what this code > > is good for > > > > 2. mx2_videobuf_release should not set pcdev->active on i.MX27, because > > mx27_camera_frame_done needs this pointer > > > > 3. In mx27_camera_emma_buf_init I don't know the meaning of those hard > > coded magic numbers > > > > Applied i.MX27 fixes from Sascha. > > > > Baruch Siach (3): > > mx2_camera: Add soc_camera support for i.MX25/i.MX27 > > mx27: add support for the CSI device > > mx25: add support for the CSI device > > > > arch/arm/mach-mx2/clock_imx27.c | 2 +- > > arch/arm/mach-mx2/devices.c | 31 + > > arch/arm/mach-mx2/devices.h | 1 + > > arch/arm/mach-mx25/clock.c | 14 +- > > arch/arm/mach-mx25/devices.c | 22 + > > arch/arm/mach-mx25/devices.h | 1 + > > arch/arm/plat-mxc/include/mach/memory.h | 4 +- > > arch/arm/plat-mxc/include/mach/mx25.h | 2 + > > arch/arm/plat-mxc/include/mach/mx2_cam.h | 46 + > > drivers/media/video/Kconfig | 13 + > > drivers/media/video/Makefile | 1 + > > drivers/media/video/mx2_camera.c | 1471 ++++++++++++++++++++++++++++++ > > 12 files changed, 1603 insertions(+), 5 deletions(-) > > create mode 100644 arch/arm/plat-mxc/include/mach/mx2_cam.h > > create mode 100644 drivers/media/video/mx2_camera.c > > > > --- > Guennadi Liakhovetski, Ph.D. > Freelance Open-Source Software Developer > http://www.open-technology.de/ -- ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch@xxxxxxxxxx - tel: +972.2.679.5364, http://www.tkos.co.il - -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
