PCIe spec 5.0r1.0 section 2.2.6.2 implementation note, In configurations
where a Requester with 10-Bit Tag Requester capability needs to target
multiple Completers, one needs to ensure that the Requester sends 10-Bit
Tag Requests only to Completers that have 10-Bit Tag Completer capability.
So we enable 10-Bit Tag Requester for root port only when the devices
under the root port support 10-Bit Tag Completer.
Signed-off-by: Dongdong Liu <liudongdong3@xxxxxxxxxx>
---
drivers/pci/pcie/portdrv_pci.c | 72 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 72 insertions(+)
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index c7ff1ee..0f9fb13 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -90,6 +90,75 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = {
#define PCIE_PORTDRV_PM_OPS NULL
#endif /* !PM */
+static int pci_10bit_tag_comp_support(struct pci_dev *dev, void *data)
+{
+ u8 *support = data;
+
+ if (*support == 0)
+ return 0;
+
+ if (!pci_is_pcie(dev)) {
+ *support = 0;
+ return 0;
+ }
+
+ /*
+ * PCIe spec 5.0r1.0 section 2.2.6.2 implementation note.
+ * For configurations where a Requester with 10-Bit Tag Requester
+ * capability targets Completers where some do and some do not have
+ * 10-Bit Tag Completer capability, how the Requester determines which
+ * NPRs include 10-Bit Tags is outside the scope of this specification.
+ * So we do not consider hotplug scenario.
+ */
+ if (dev->is_hotplug_bridge) {
+ *support = 0;
+ return 0;
+ }
+
+ if (!(dev->pcie_devcap2 & PCI_EXP_DEVCAP2_10BIT_TAG_COMP)) {
+ *support = 0;
+ return 0;
+ }
+
+ return 0;
+}
+
+static void pci_configure_rp_10bit_tag(struct pci_dev *dev)
+{
+ u8 support = 1;
+
+ if (dev->subordinate == NULL)
+ return;
+
+ /* If no devices under the root port, no need to enable 10-Bit Tag. */
+ if (list_empty(&dev->subordinate->devices))
+ return;
+
+ pci_10bit_tag_comp_support(dev, &support);
+ if (!support)
+ return;
+
+ /*
+ * PCIe spec 5.0r1.0 section 2.2.6.2 implementation note.
+ * In configurations where a Requester with 10-Bit Tag Requester
+ * capability needs to target multiple Completers, one needs to ensure
+ * that the Requester sends 10-Bit Tag Requests only to Completers
+ * that have 10-Bit Tag Completer capability. So we enable 10-Bit Tag
+ * Requester for root port only when the devices under the root port
+ * support 10-Bit Tag Completer.
+ */
+ pci_walk_bus(dev->subordinate, pci_10bit_tag_comp_support, &support);
+ if (!support)
+ return;
+
+ if (!(dev->pcie_devcap2 & PCI_EXP_DEVCAP2_10BIT_TAG_REQ))
+ return;
+
+ pci_dbg(dev, "enabling 10-Bit Tag Requester\n");
+ pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
+ PCI_EXP_DEVCTL2_10BIT_TAG_REQ_EN);
+}
+
/*
* pcie_portdrv_probe - Probe PCI-Express port devices
* @dev: PCI-Express port device being probed
@@ -111,6 +180,9 @@ static int pcie_portdrv_probe(struct pci_dev *dev,
(type != PCI_EXP_TYPE_RC_EC)))
return -ENODEV;
+ if (type == PCI_EXP_TYPE_ROOT_PORT)
+ pci_configure_rp_10bit_tag(dev);
+
if (type == PCI_EXP_TYPE_RC_EC)
pcie_link_rcec(dev);
--
2.7.4
