Check that the follower ignores the Record TV Screen message if the
initiator has a logical address other than Record or Backup (aka Reserved
in CEC Version < 2.0). If the follower replies correctly, check that the
source operand is valid.
Signed-off-by: Deborah Brouwer <deborahbrouwer3563@xxxxxxxxx>
---
utils/cec-compliance/cec-test.cpp | 48 +++++++++++++++++++++++++------
utils/cec-follower/cec-tuner.cpp | 8 ++++--
2 files changed, 45 insertions(+), 11 deletions(-)
diff --git a/utils/cec-compliance/cec-test.cpp b/utils/cec-compliance/cec-test.cpp
index 40d8369d..9512f319 100644
--- a/utils/cec-compliance/cec-test.cpp
+++ b/utils/cec-compliance/cec-test.cpp
@@ -1150,13 +1150,6 @@ static const vec_remote_subtests tuner_ctl_subtests{
static int one_touch_rec_tv_screen(struct node *node, unsigned me, unsigned la, bool interactive)
{
- /*
- TODO:
- - Page 36 in HDMI CEC 1.4b spec lists additional behaviors that should be
- checked for.
- - The TV should ignore this message when received from other LA than Recording or
- Reserved.
- */
struct cec_msg msg;
cec_msg_init(&msg, me, la);
@@ -1172,8 +1165,47 @@ static int one_touch_rec_tv_screen(struct node *node, unsigned me, unsigned la,
return OK_REFUSED;
if (cec_msg_status_is_abort(&msg))
return OK_PRESUMED;
+ /*
+ * Follower should ignore this message if initiator has a logical
+ * address other than Record or Backup (aka "Reserved" in CEC Version < 2.0).
+ */
+ if (!cec_has_record(1 << me) && !cec_has_backup(1 << me)) {
+ fail_on_test(!timed_out(&msg));
+ return OK;
+ }
+ fail_on_test(timed_out(&msg));
- return 0;
+ struct cec_op_record_src rec_src = {};
+
+ cec_ops_record_on(&msg, &rec_src);
+
+ if (rec_src.type < 1 || rec_src.type > 5)
+ fail("Invalid source.\n");
+
+ if (rec_src.type == CEC_OP_RECORD_SRC_DIGITAL &&
+ rec_src.digital.service_id_method == CEC_OP_SERVICE_ID_METHOD_BY_DIG_ID) {
+
+ switch(rec_src.digital.dig_bcast_system) {
+ case CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_GEN:
+ case CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_GEN:
+ case CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_GEN:
+ case CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_BS:
+ case CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_CS:
+ case CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_T:
+ case CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_CABLE:
+ case CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_SAT:
+ case CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ATSC_T:
+ case CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_C:
+ case CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S:
+ case CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_S2:
+ case CEC_OP_DIG_SERVICE_BCAST_SYSTEM_DVB_T:
+ break;
+ default:
+ fail("Invalid digital service broadcast system operand.\n");
+ }
+ }
+
+ return OK;
}
static int one_touch_rec_on(struct node *node, unsigned me, unsigned la, bool interactive)
diff --git a/utils/cec-follower/cec-tuner.cpp b/utils/cec-follower/cec-tuner.cpp
index b9c21684..edf5016b 100644
--- a/utils/cec-follower/cec-tuner.cpp
+++ b/utils/cec-follower/cec-tuner.cpp
@@ -583,9 +583,6 @@ void process_tuner_record_timer_msgs(struct node *node, struct cec_msg &msg, uns
This is only a basic implementation.
TODO:
- - If we are a TV, we should only send Record On if the
- remote end is a Recording device or Reserved. Otherwise ignore.
-
- Device state should reflect whether we are recording, etc. In
recording mode we should ignore Standby messages.
*/
@@ -594,6 +591,11 @@ void process_tuner_record_timer_msgs(struct node *node, struct cec_msg &msg, uns
if (!node->has_rec_tv)
break;
+ __u8 la = cec_msg_initiator(&msg);
+
+ if (!cec_has_record(1 << la) && !cec_has_backup(1 << la))
+ return;
+
struct cec_op_record_src rec_src = {};
rec_src.type = CEC_OP_RECORD_SRC_OWN;
--
2.25.1
