On Sun, 16 May 2010 12:38:03 +0200, semiRocket <semirocket@xxxxxxxxx>
wrote:
On Mon, 10 May 2010 01:15:35 +0200, Emard <davoremard@xxxxxxxxx> wrote:
HI
This is even more cleanup from spaces into tabs
and replacing KEY_BACKSPACE with KEY_BACK
which I think is more appropriate for this remote.
compro t750f patch v17
About the remote - I noticed 2-10% of the keypresses
are not recognized, seems like it either looses packets
or saa7134 gpio should be scanned faster/better/more_reliable?
I think this may be the issue with other 7134 based
remotes too
Best Regards, Emard
Hi Davor,
Unfortunately it doesn't work for me. It can't load firmware like
before, I've attached patch against recent hg tree I applied manually
(without IR code part) and dmesg output.
In tvtime it shows black screen in PAL mode, if switch to SECAM, it's
still black screen but with some random flickering occurring represented
by horizontal red/green lines. No white/black dots noise present.
Thanks,
Samuel
The good news is that it managed to load firmware after beign prepared by
windows driver previously, but somehow unstable e.g. sometimes I can
restart tvtime 3 times before stops working, sometimes it load firmware on
modprobe but fails when I run tvtime.
Other than that analog seems to work fine when firmware successfully load.
I didn't managed to get the sound though, previosly with the command like
sox -c 2 -s -r 32000 -t ossdsp /dev/dsp1 -t ossdsp -r 32000 /dev/dsp &
now doesn't work, I'm not sure yet if it's the driver problem.
I didn't test dvb at all (don't have good signal).
Best regards,
Samuel
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
