Re: Logilink DVB-T2 stick VG0022A

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

On Fri, Jun 11, 2021 at 04:49:17PM +0200, Uwe Kleine-König wrote:
> Hello,
> 
> I have a Logilink VG0022A stick and when I plug it in I get:
> 
> [  426.019171] usb 1-1.3: new high-speed USB device number 5 using xhci-hcd
> [  426.171443] usb 1-1.3: New USB device found, idVendor=1d19, idProduct=0100, bcdDevice= 1.00
> [  426.172184] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [  426.172822] usb 1-1.3: Product: TS Aggregator
> [  426.173205] usb 1-1.3: Manufacturer: ITE Tech., Inc.
> [  426.173641] usb 1-1.3: SerialNumber: AF0102020700001
> [  426.180314] dvb_usb_af9035 1-1.3:1.0: prechip_version=83 chip_version=01 chip_type=9306
> [  426.181324] usb 1-1.3: dvb_usb_v2: found a 'Logilink VG0022A' in cold state
> [  426.182034] usb 1-1.3: firmware: direct-loading firmware dvb-usb-it9303-01.fw
> [  426.182666] usb 1-1.3: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9303-01.fw'
> [  426.221915] dvb_usb_af9035 1-1.3:1.0: firmware version=1.4.0.0
> [  426.222456] usb 1-1.3: dvb_usb_v2: found a 'Logilink VG0022A' in warm state
> [  426.224991] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
> [  426.225998] dvbdev: DVB: registering new adapter (Logilink VG0022A)
> [  426.226551] usb 1-1.3: media controller created
> [  426.229845] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
> [  426.454279] i2c i2c-9: Added multiplexed i2c bus 10
> [  426.454726] si2168 9-0067: Silicon Labs Si2168-B40 successfully identified
> [  426.455377] si2168 9-0067: firmware version: B 4.0.2
> [  426.458522] usb 1-1.3: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
> [  426.460236] dvbdev: dvb_create_media_entity: media entity 'Silicon Labs Si2168' registered.
> [  426.469300] si2157 10-0063: Silicon Labs Si2147/2148/2157/2158 successfully attached
> [  426.489642] usb 1-1.3: dvb_usb_v2: 'Logilink VG0022A' successfully initialized and connected
> 
> which looks fine. But when I try to use it (using mumudvb2) I get:
> 
> [  479.915150] si2168 9-0067: firmware: direct-loading firmware dvb-demod-si2168-b40-01.fw
> [  479.915871] si2168 9-0067: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
> [  480.436016] si2168 9-0067: firmware version: B 4.0.11
> [  480.444089] si2157 10-0063: device is buggy, skipping firmware download
> [  480.496756] si2157 10-0063: firmware version: �.�.255
> 
> and it fails to tune.

Never mind. I use a different anntenna now, and it tunes in just fine
\o/

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux