This device uses an ftdi usb serial port, so this driver has a tiny amount of usb ftdi code. It would be preferable to connect this driver via serdev or line-discipline, but unfortunately neither support hotplugging yet. See http://www.usbuirt.com/ Signed-off-by: Sean Young <sean@xxxxxxxx> --- drivers/media/rc/Kconfig | 11 + drivers/media/rc/Makefile | 1 + drivers/media/rc/uirt.c | 740 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 752 insertions(+) create mode 100644 drivers/media/rc/uirt.c diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index d0a8326b75c2..cb1a2c65f920 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -471,6 +471,17 @@ config IR_TOY To compile this driver as a module, choose M here: the module will be called ir_toy. +config IR_UIRT + tristate "USB-UIRT" + depends on RC_CORE + depends on USB_ARCH_HAS_HCD + help + Say Y here if you want to use the USB-UIRT. See + http://www.usbuirt.com/ + + To compile this driver as a module, choose M here: the module will be + called uirt. + endif #RC_DEVICES endif #RC_CORE diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile index 692e9b6b203f..068036698747 100644 --- a/drivers/media/rc/Makefile +++ b/drivers/media/rc/Makefile @@ -50,3 +50,4 @@ obj-$(CONFIG_IR_SIR) += sir_ir.o obj-$(CONFIG_IR_MTK) += mtk-cir.o obj-$(CONFIG_RC_XBOX_DVD) += xbox_remote.o obj-$(CONFIG_IR_TOY) += ir_toy.o +obj-$(CONFIG_IR_UIRT) += uirt.o diff --git a/drivers/media/rc/uirt.c b/drivers/media/rc/uirt.c new file mode 100644 index 000000000000..975cf464113e --- /dev/null +++ b/drivers/media/rc/uirt.c @@ -0,0 +1,740 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +/* + * USB-UIRT + * + * Copyright (C) 2021 Sean Young <sean@xxxxxxxx> + * + * See http://www.usbuirt.com/USB-UIRT%20Command%20Protocol.doc + */ + +#include <linux/completion.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/slab.h> +#include <linux/usb/input.h> + +#include <media/rc-core.h> + +/* Copied from drivers/usb/serial/ftdi_sio.h */ +#define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40 +#define FTDI_SIO_SET_BAUDRATE_REQUEST 3 + +#define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER +#define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40 + +#define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40 +#define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL + +#define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */ +#define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */ + +#define FTDI_SIO_RTS_CTS_HS BIT(8) +#define FTDI_RS0_CTS BIT(4) + +static const u8 CMD_GETVERSION[] = { 0x23, 0xdd }; +static const u8 CMD_SETMODERAW[] = { 0x21, 0xdf }; +static const u8 CMD_SETWIDEBAND[] = { 0x24, 0xdc }; + +#define UNIT_US 50 +#define IR_TIMEOUT 12500 +#define MAX_PACKET 64 + +enum cmd_state { + CMD_STATE_GETVERSION, + CMD_STATE_SETMODERAW, + CMD_STATE_SETMODEWIDEBAND, + CMD_STATE_IRDATA, + CMD_STATE_DOTXRAW, + CMD_STATE_STREAMING_TX, +}; + +enum rx_state { + RX_STATE_INTERSPACE_HIGH, + RX_STATE_INTERSPACE_LOW, + RX_STATE_ON_HIGH, + RX_STATE_ON_LOW, + RX_STATE_FREQ_HIGH, + RX_STATE_FREQ_LOW, + RX_STATE_OFF_HIGH, + RX_STATE_OFF_LOW, +}; + +struct uirt { + struct device *dev; + struct usb_device *usbdev; + + struct rc_dev *rc; + struct urb *urb_in, *urb_out; + + u8 *in; + u8 *out; + struct completion cmd_done; + u8 freq; + u8 high; + bool wideband; + u32 last_duration; + + enum cmd_state cmd_state; + enum rx_state rx_state; + + void *tx_buf; + u32 tx_len; + + char phys[64]; +}; + +// read IR in raw mode +static void uirt_raw_mode(struct uirt *uirt, u32 offset, u32 len) +{ + uint i, duration; + + for (i = offset; i < len; i++) { + switch (uirt->rx_state) { + case RX_STATE_INTERSPACE_HIGH: + uirt->rx_state = RX_STATE_INTERSPACE_LOW; + break; + case RX_STATE_INTERSPACE_LOW: + uirt->rx_state = RX_STATE_ON_HIGH; + break; + case RX_STATE_ON_HIGH: + duration = uirt->in[i]; + if (duration == 0) + duration = 1; + + ir_raw_event_store(uirt->rc, &((struct ir_raw_event) { + .duration = duration * UNIT_US, + .pulse = true, + })); + + uirt->rx_state = RX_STATE_OFF_HIGH; + break; + case RX_STATE_OFF_HIGH: + if (uirt->in[i] == 0xff) { + ir_raw_event_store(uirt->rc, &((struct ir_raw_event) { + .duration = IR_TIMEOUT, + .timeout = true, + })); + uirt->rx_state = RX_STATE_INTERSPACE_HIGH; + break; + } + + duration = uirt->in[i]; + if (duration == 0) + duration = 1; + + ir_raw_event_store(uirt->rc, &((struct ir_raw_event) { + .duration = duration * UNIT_US, + .pulse = false, + })); + uirt->rx_state = RX_STATE_ON_HIGH; + break; + default: + WARN(1, "unreachable state"); + uirt->rx_state = RX_STATE_INTERSPACE_HIGH; + break; + } + } + + ir_raw_event_handle(uirt->rc); +} + +// Read IR in wideband mode. The byte stream is delivered in packets, +// and the values which come in two bytes may straddle two packets +static void uirt_wideband(struct uirt *uirt, u32 offset, u32 len) +{ + uint i, duration, carrier, pulses; + + for (i = offset; i < len; i++) { + switch (uirt->rx_state) { + case RX_STATE_INTERSPACE_HIGH: + uirt->rx_state = RX_STATE_INTERSPACE_LOW; + break; + case RX_STATE_INTERSPACE_LOW: + uirt->rx_state = RX_STATE_ON_HIGH; + break; + case RX_STATE_ON_HIGH: + uirt->high = uirt->in[i]; + uirt->rx_state = RX_STATE_ON_LOW; + break; + case RX_STATE_ON_LOW: + // duration is in 400ns units + duration = (uirt->high << 8) | uirt->in[i]; + if (duration < 3) + duration = 3; + uirt->last_duration = duration; + ir_raw_event_store(uirt->rc, &((struct ir_raw_event) { + .duration = DIV_ROUND_CLOSEST(duration * 2, 5), + .pulse = true, + })); + uirt->rx_state = RX_STATE_FREQ_HIGH; + break; + case RX_STATE_FREQ_HIGH: + if (uirt->in[i] & 0x80) { + uirt->high = uirt->in[i] & 0x7f; + uirt->rx_state = RX_STATE_FREQ_LOW; + break; + } + + uirt->high = 0; + fallthrough; + case RX_STATE_FREQ_LOW: + pulses = (uirt->high << 8) | uirt->in[i]; + if (pulses && uirt->last_duration) { + dev_dbg(uirt->dev, "carrier duration %u pulses %u", + uirt->last_duration, pulses); + + // calculate the Hz of pulses in duration 400ns units + carrier = DIV_ROUND_CLOSEST_ULL(pulses * 10000000ull, + uirt->last_duration * 4); + ir_raw_event_store(uirt->rc, &((struct ir_raw_event) { + .carrier = carrier, + .carrier_report = true, + })); + } + uirt->rx_state = RX_STATE_OFF_HIGH; + break; + case RX_STATE_OFF_HIGH: + if (uirt->in[i] == 0xff) { + ir_raw_event_store(uirt->rc, &((struct ir_raw_event) { + .duration = IR_TIMEOUT, + .timeout = true, + })); + uirt->rx_state = RX_STATE_INTERSPACE_HIGH; + } else { + uirt->high = uirt->in[i]; + uirt->rx_state = RX_STATE_OFF_LOW; + } + break; + case RX_STATE_OFF_LOW: + // duration is in 400ns units + duration = (uirt->high << 8) | uirt->in[i]; + if (duration < 3) + duration = 3; + ir_raw_event_store(uirt->rc, &((struct ir_raw_event) { + .duration = DIV_ROUND_CLOSEST(duration * 2, 5), + .pulse = false, + })); + uirt->rx_state = RX_STATE_ON_HIGH; + break; + } + } + + ir_raw_event_handle(uirt->rc); +} + +static void uirt_response(struct uirt *uirt, u32 len) +{ + int offset = 2; + int i; + + dev_dbg(uirt->dev, "state:%d data: %*phN\n", uirt->cmd_state, len, uirt->in); + + // Do we have more IR to transmit + if (uirt->cmd_state == CMD_STATE_STREAMING_TX && len >= 2 && + uirt->tx_len && uirt->in[0] & FTDI_RS0_CTS) { + u32 len; + int err; + + len = min_t(u32, uirt->tx_len, MAX_PACKET); + + memcpy(uirt->out, uirt->tx_buf, len); + uirt->urb_out->transfer_buffer_length = len; + + uirt->tx_len -= len; + uirt->tx_buf += len; + + err = usb_submit_urb(uirt->urb_out, GFP_ATOMIC); + if (err != 0) + dev_warn(uirt->dev, + "failed to submit out urb: %d\n", err); + } + + // if we only have two bytes, it just gives us the serial line status + if (len <= 2) + return; + + switch (uirt->cmd_state) { + case CMD_STATE_GETVERSION: + if (len >= 10) { + // check checksum + u8 checksum = 0; + + for (i = 2; i < len; i++) + checksum += uirt->in[i]; + + if (checksum != 0) { + dev_err(uirt->dev, "checksum does not match: %*phN\n", + len, uirt->in); + return; + } + + dev_info(uirt->dev, + "USB-UIRT firmware v%u.%u protocol v%u.%u %02u-%02u-%04u", + uirt->in[2], uirt->in[3], uirt->in[4], + uirt->in[5], uirt->in[6], uirt->in[7], + 2000 + uirt->in[8]); + + complete(&uirt->cmd_done); + uirt->cmd_state = CMD_STATE_IRDATA; + offset += 10; + } + break; + case CMD_STATE_DOTXRAW: + case CMD_STATE_STREAMING_TX: + case CMD_STATE_SETMODERAW: + case CMD_STATE_SETMODEWIDEBAND: + if (len >= 3) { + switch (uirt->in[2]) { + case 0x20: + // 0x20 transmitting is expected during streaming tx + if (uirt->cmd_state == CMD_STATE_STREAMING_TX) + return; + + if (uirt->cmd_state == CMD_STATE_DOTXRAW) + complete(&uirt->cmd_done); + else + dev_err(uirt->dev, "device transmitting"); + break; + case 0x21: + if (uirt->tx_len) { + dev_err(uirt->dev, "tx completed with %u left to send", + uirt->tx_len); + } else { + if (uirt->cmd_state == CMD_STATE_SETMODERAW) + uirt->wideband = false; + if (uirt->cmd_state == CMD_STATE_SETMODEWIDEBAND) + uirt->wideband = true; + + complete(&uirt->cmd_done); + } + break; + case 0x80: + dev_err(uirt->dev, "checksum error"); + break; + case 0x81: + dev_err(uirt->dev, "timeout"); + break; + case 0x82: + dev_err(uirt->dev, "command error"); + break; + default: + dev_err(uirt->dev, "unknown response"); + } + + uirt->cmd_state = CMD_STATE_IRDATA; + offset += 1; + } + default: + break; + } + + if (uirt->wideband) + uirt_wideband(uirt, offset, len); + else + uirt_raw_mode(uirt, offset, len); +} + +static void uirt_out_callback(struct urb *urb) +{ + struct uirt *uirt = urb->context; + + switch (urb->status) { + case 0: + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + return; + case -EPIPE: + default: + dev_warn(uirt->dev, "out urb status: %d\n", urb->status); + break; + } +} + +static void uirt_in_callback(struct urb *urb) +{ + struct uirt *uirt = urb->context; + int ret; + + if (urb->status == 0) + uirt_response(uirt, urb->actual_length); + else + dev_dbg(uirt->dev, "in urb status: %d\n", urb->status); + + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret && ret != -ENODEV) + dev_warn(uirt->dev, "failed to resubmit urb: %d\n", ret); +} + +static int uirt_command(struct uirt *uirt, const u8 *cmd, u32 cmd_len, + enum cmd_state state) +{ + int err; + + init_completion(&uirt->cmd_done); + + uirt->cmd_state = state; + + memcpy(uirt->out, cmd, cmd_len); + uirt->urb_out->transfer_buffer_length = cmd_len; + + err = usb_submit_urb(uirt->urb_out, GFP_KERNEL); + if (err != 0) { + uirt->cmd_state = CMD_STATE_IRDATA; + return err; + } + + if (!wait_for_completion_timeout(&uirt->cmd_done, + msecs_to_jiffies(USB_CTRL_SET_TIMEOUT))) { + usb_kill_urb(uirt->urb_out); + uirt->cmd_state = CMD_STATE_IRDATA; + return -ETIMEDOUT; + } + + return 0; +} + +static int uirt_setup(struct uirt *uirt) +{ + int err; + + err = uirt_command(uirt, CMD_SETMODERAW, sizeof(CMD_SETMODERAW), + CMD_STATE_SETMODERAW); + if (err) { + dev_err(uirt->dev, "set mode raw command failed: %d\n", + err); + return err; + } + + err = uirt_command(uirt, CMD_GETVERSION, + sizeof(CMD_GETVERSION), CMD_STATE_GETVERSION); + if (err != 0) + dev_err(uirt->dev, "get version command failed: %d\n", + err); + + return err; +} + +// IR TX when the data can fit into a single packet (i.e 64 bytes). +// count must be no larger than 24, else we might overflow the buffer. +static int uirt_short_tx(struct rc_dev *rc, uint *txbuf, uint count) +{ + struct uirt *uirt = rc->priv; + u8 out[MAX_PACKET], checksum; + u32 i, dest, width, freq; + int err; + + out[0] = 0x36; // DOTXRAW + out[2] = uirt->freq; // carrier frequency + out[3] = 1; // number of repeats + + dest = 7; + + freq = uirt->freq & 0x7f; + + for (i = 0; i < count; i++) { + // width = (us / freq) * 2.5 + width = DIV_ROUND_CLOSEST(txbuf[i] * 5, freq * 2); + + if (width == 0) + width = 1; + else if (width > 127) + out[dest++] = (width >> 8) | 0x80; + + out[dest++] = width; + } + + // length of RAWSTRUCT + 1 + out[1] = dest - 1; + // number of bytes in encoded pulse/space + out[6] = dest - 7; + + // checksum + for (i = 0, checksum = 0; i < dest; i++) + checksum -= out[i]; + + out[dest++] = checksum; + + uirt->tx_buf = NULL; + uirt->tx_len = 0; + + err = uirt_command(uirt, out, dest, CMD_STATE_DOTXRAW); + if (err != 0) + return err; + + return count; +} + +static int uirt_tx(struct rc_dev *rc, uint *txbuf, uint count) +{ + struct uirt *uirt = rc->priv; + u8 *out; + u32 i, dest, unit_raw, freq, len; + int err; + + // streaming tx does not work for short IR; use non-streaming + // tx for short IR + if (count <= 24) + return uirt_short_tx(rc, txbuf, count); + + out = kmalloc(count * 2 + 3, GFP_KERNEL); + if (!out) + return -ENOMEM; + + out[0] = 0x25; // Streaming Transmit + out[1] = 0xdb; // checksum over command (just the previous byte) + out[2] = uirt->freq; // carrier frequency + + dest = 3; + + freq = uirt->freq & 0x7f; + + for (i = 0; i < count; i++) { + // width = (us / freq) * 2.5 + unit_raw = DIV_ROUND_CLOSEST(txbuf[i] * 5, freq * 2); + + if (unit_raw == 0) + unit_raw = 1; + else if (unit_raw > 127) + out[dest++] = (unit_raw >> 8) | 0x80; + + out[dest++] = unit_raw; + } + + len = min_t(u32, dest, MAX_PACKET); + + uirt->tx_buf = out + len; + uirt->tx_len = dest - len; + + err = uirt_command(uirt, out, len, CMD_STATE_STREAMING_TX); + kfree(out); + if (err != 0) + return err; + + return count; +} + +static int uirt_set_tx_carrier(struct rc_dev *dev, u32 carrier) +{ + struct uirt *uirt = dev->priv; + + if (carrier == 0) + // bit 7 must be 1 for unmodulated, lower bits need to + // be something that makes sense for tx + uirt->freq = 0xc0; + else if (carrier >= 20000 && carrier <= 500000) + // bit 7 must be 0 for modulated + uirt->freq = 2500000 / carrier; + else + return -EINVAL; + + return 0; +} + +static int uirt_set_rx_wideband(struct rc_dev *dev, int enable) +{ + struct uirt *uirt = dev->priv; + int err; + + if (enable) + err = uirt_command(uirt, CMD_SETWIDEBAND, + sizeof(CMD_SETWIDEBAND), + CMD_STATE_SETMODEWIDEBAND); + else + err = uirt_command(uirt, CMD_SETMODERAW, + sizeof(CMD_SETMODERAW), + CMD_STATE_SETMODERAW); + + if (err) { + dev_err(uirt->dev, "set mode command failed: %d\n", + err); + return err; + } + + return 0; +} + +static int init_ftdi(struct usb_device *udev) +{ + int err; + + // set the baud rate + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + FTDI_SIO_SET_BAUDRATE_REQUEST, + FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE, + 0x4009, 0x0001, + NULL, 0, USB_CTRL_SET_TIMEOUT); + if (err) + return err; + + // enabling rts/cts flow control + err = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, + 0, FTDI_SIO_RTS_CTS_HS, + NULL, 0, USB_CTRL_SET_TIMEOUT); + if (err) + return err; + + // Set latency in milliseconds. The USB-UIRT will generate a + // urb every latency milliseconds (IR or not), so this should be + // set as high as possible to reduce interrupts. However, setting + // this value too high will mean there is a preceptible delay for + // IR being processed and a key press being registered. + // + // Choose 50ms as a compromise. + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + FTDI_SIO_SET_LATENCY_TIMER_REQUEST, + FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, + 50, 0, + NULL, 0, USB_CTRL_SET_TIMEOUT); +} + +static int uirt_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *usbdev = interface_to_usbdev(intf); + struct usb_endpoint_descriptor *ep_in; + struct usb_endpoint_descriptor *ep_out; + struct uirt *uirt; + struct rc_dev *rc; + struct urb *urb; + int pipe, err; + + if (usb_find_common_endpoints(intf->cur_altsetting, &ep_in, &ep_out, NULL, NULL) || + usb_endpoint_maxp(ep_in) != MAX_PACKET || + usb_endpoint_maxp(ep_out) != MAX_PACKET) { + dev_err(&intf->dev, "required endpoints not found\n"); + return -ENODEV; + } + + uirt = kzalloc(sizeof(*uirt), GFP_KERNEL); + if (!uirt) + return -ENOMEM; + + uirt->in = kmalloc(MAX_PACKET, GFP_KERNEL); + if (!uirt->in) + goto free_uirt; + + uirt->out = kmalloc(MAX_PACKET, GFP_KERNEL); + if (!uirt->out) + goto free_uirt; + + rc = rc_allocate_device(RC_DRIVER_IR_RAW); + if (!rc) + goto free_uirt; + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + goto free_rcdev; + + pipe = usb_rcvbulkpipe(usbdev, ep_in->bEndpointAddress); + usb_fill_bulk_urb(urb, usbdev, pipe, uirt->in, MAX_PACKET, + uirt_in_callback, uirt); + uirt->urb_in = urb; + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + goto free_rcdev; + + pipe = usb_sndbulkpipe(usbdev, ep_out->bEndpointAddress); + usb_fill_bulk_urb(urb, usbdev, pipe, uirt->out, MAX_PACKET, + uirt_out_callback, uirt); + + uirt->dev = &intf->dev; + uirt->usbdev = usbdev; + uirt->rc = rc; + uirt->urb_out = urb; + uirt->rx_state = RX_STATE_INTERSPACE_HIGH; + + err = usb_submit_urb(uirt->urb_in, GFP_KERNEL); + if (err != 0) { + dev_err(uirt->dev, "failed to submit read urb: %d\n", err); + goto free_rcdev; + } + + err = init_ftdi(usbdev); + if (err) { + dev_err(uirt->dev, "failed to setup ftdi: %d\n", err); + goto kill_urbs; + } + + err = uirt_setup(uirt); + if (err) + goto kill_urbs; + + usb_make_path(usbdev, uirt->phys, sizeof(uirt->phys)); + + rc->device_name = "USB-UIRT"; + rc->driver_name = KBUILD_MODNAME; + rc->input_phys = uirt->phys; + usb_to_input_id(usbdev, &rc->input_id); + rc->dev.parent = &intf->dev; + rc->priv = uirt; + rc->tx_ir = uirt_tx; + rc->s_tx_carrier = uirt_set_tx_carrier; + rc->s_learning_mode = uirt_set_rx_wideband; + rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER; + rc->map_name = RC_MAP_RC6_MCE; + rc->rx_resolution = UNIT_US; + rc->timeout = IR_TIMEOUT; + + uirt_set_tx_carrier(rc, 38000); + + err = rc_register_device(rc); + if (err) + goto kill_urbs; + + usb_set_intfdata(intf, uirt); + + return 0; + +kill_urbs: + usb_kill_urb(uirt->urb_in); + usb_kill_urb(uirt->urb_out); +free_rcdev: + usb_free_urb(uirt->urb_in); + usb_free_urb(uirt->urb_out); + rc_free_device(rc); +free_uirt: + kfree(uirt->in); + kfree(uirt->out); + kfree(uirt); + return err; +} + +static void uirt_disconnect(struct usb_interface *intf) +{ + struct uirt *ir = usb_get_intfdata(intf); + + rc_unregister_device(ir->rc); + usb_set_intfdata(intf, NULL); + usb_kill_urb(ir->urb_in); + usb_kill_urb(ir->urb_out); + usb_free_urb(ir->urb_in); + usb_free_urb(ir->urb_out); + kfree(ir->in); + kfree(ir->out); + kfree(ir); +} + +static const struct usb_device_id uirt_table[] = { + { USB_DEVICE(0x0403, 0xf850) }, + { } +}; + +static struct usb_driver uirt_driver = { + .name = KBUILD_MODNAME, + .probe = uirt_probe, + .disconnect = uirt_disconnect, + .id_table = uirt_table, +}; + +module_usb_driver(uirt_driver); + +MODULE_AUTHOR("Sean Young <sean@xxxxxxxx>"); +MODULE_DESCRIPTION("USB-UIRT driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(usb, uirt_table); -- 2.31.1
