No need to use & to get the start address of an array.
Fix the size of vga_edid.edid to a single block (128 bytes) to fix
this smatch error:
adv7842.c:2538 adv7842_set_edid() error: memcpy() '&state->vga_edid.edid' too small (128 vs 512)
Signed-off-by: Hans Verkuil <hverkuil-cisco@xxxxxxxxx>
---
diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c
index 78e61fe6f2f0..21dde17e6b37 100644
--- a/drivers/media/i2c/adv7842.c
+++ b/drivers/media/i2c/adv7842.c
@@ -2531,20 +2531,20 @@ static int adv7842_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *e)
switch (e->pad) {
case ADV7842_EDID_PORT_VGA:
- memset(&state->vga_edid.edid, 0, sizeof(state->vga_edid.edid));
+ memset(state->vga_edid.edid, 0, sizeof(state->vga_edid.edid));
state->vga_edid.blocks = e->blocks;
state->vga_edid.present = e->blocks ? 0x1 : 0x0;
if (e->blocks)
- memcpy(&state->vga_edid.edid, e->edid, 128 * e->blocks);
+ memcpy(state->vga_edid.edid, e->edid, 128);
err = edid_write_vga_segment(sd);
break;
case ADV7842_EDID_PORT_A:
case ADV7842_EDID_PORT_B:
- memset(&state->hdmi_edid.edid, 0, sizeof(state->hdmi_edid.edid));
+ memset(state->hdmi_edid.edid, 0, sizeof(state->hdmi_edid.edid));
state->hdmi_edid.blocks = e->blocks;
if (e->blocks) {
state->hdmi_edid.present |= 0x04 << e->pad;
- memcpy(&state->hdmi_edid.edid, e->edid, 128 * e->blocks);
+ memcpy(state->hdmi_edid.edid, e->edid, 128 * e->blocks);
} else {
state->hdmi_edid.present &= ~(0x04 << e->pad);
adv7842_s_detect_tx_5v_ctrl(sd);
