Hello, This is a respin/v2 of the previous series for adding the isl7998x driver [0] sent by Marek Vasut. I updated the patches according to the review comments of this previous series. The isl7998x is an analog video to MIPI CSI-2 or BT.656 converter. The dt binding describes only the isl79987 chip, which supports MIPI CSI-2. The driver could be extended to handle isl79988 (for BT.656), too, but this isn't implemented. As this is a v2, I left the patch author as is, but added myself as a maintainer for the driver. Please tell me, if I should handle this differently and/or further document my changes in the patches. checkpatch.pl complains about the macros that are used for handling the regmaps and paged register space in the driver. I don't have a good idea how to handle this differently. Suggestions are welcome, if this is actually problem. Michael [0] https://lore.kernel.org/linux-media/20190520201812.7937-1-marex@xxxxxxx/ Changelog: v2: - convert dt binding to yaml - change binding to ISL79987 only - general driver cleanup - convert driver to pm_runtime - use ports in device tree for specifying inputs - add reset gpio Marek Vasut (2): media: dt-bindings: Add Intersil ISL79987 DT bindings media: i2c: isl7998x: Add driver for Intersil ISL7998x .../bindings/media/i2c/isil,isl79987.yaml | 108 ++ MAINTAINERS | 8 + drivers/media/i2c/Kconfig | 9 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/isl7998x.c | 1421 +++++++++++++++++ 5 files changed, 1547 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml create mode 100644 drivers/media/i2c/isl7998x.c -- 2.29.2
