[PATCH v4 1/2] media: v4l2-ctrls: Add intra-refresh period control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add a control to set intra-refresh period.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
---
 .../media/v4l/ext-ctrls-codec.rst              | 18 +++++++++++++++++-
 drivers/media/v4l2-core/v4l2-ctrls-defs.c      |  2 ++
 include/uapi/linux/v4l2-controls.h             |  1 +
 3 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 0b8061666c57..803fb655af1c 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -1174,7 +1174,23 @@ enum v4l2_mpeg_video_h264_entropy_mode -
     Cyclic intra macroblock refresh. This is the number of continuous
     macroblocks refreshed every frame. Each frame a successive set of
     macroblocks is refreshed until the cycle completes and starts from
-    the top of the frame. Applicable to H264, H263 and MPEG4 encoder.
+    the top of the frame.  Note that intra-refresh period is
+    mutually exclusive with V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD
+    control, aka the client must set this one or the other but not both.
+    Applicable to H264, H263 and MPEG4 encoder.
+
+``V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD (integer)``
+    Intra macroblock refresh period. This sets the period to refresh
+    the whole frame. In other words, this defines the number of frames
+    for which the whole frame will be intra-refreshed.  An example:
+    setting period to 1 means that the whole frame will be refreshed,
+    setting period to 2 means that the half of macroblocks will be
+    intra-refreshed on frameX and the other half of macroblocks
+    will be refreshed in frameX + 1 and so on. Setting period to zero
+    means no period is specified.  Note that intra-refresh period is
+    mutually exclusive with V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB
+    control, aka the client must set this one or the other but not both.
+    Applicable to H264 and HEVC encoders.
 
 ``V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE (boolean)``
     Frame level rate control enable. If this control is disabled then
diff --git a/drivers/media/v4l2-core/v4l2-ctrls-defs.c b/drivers/media/v4l2-core/v4l2-ctrls-defs.c
index 7963c7b43450..3d73c28bafa7 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls-defs.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls-defs.c
@@ -833,6 +833,7 @@ const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE:	return "Decoder Slice Interface";
 	case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER:	return "MPEG4 Loop Filter Enable";
 	case V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB:	return "Number of Intra Refresh MBs";
+	case V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD:		return "Intra Refresh Period";
 	case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE:		return "Frame Level Rate Control Enable";
 	case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE:			return "H264 MB Level Rate Control";
 	case V4L2_CID_MPEG_VIDEO_HEADER_MODE:			return "Sequence Header Mode";
@@ -1257,6 +1258,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 	case V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE:
 	case V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE:
 	case V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY:
+	case V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD:
 		*type = V4L2_CTRL_TYPE_INTEGER;
 		break;
 	case V4L2_CID_MPEG_VIDEO_LTR_COUNT:
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index f96bea19c991..a34a18ec7f69 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -434,6 +434,7 @@ enum v4l2_mpeg_video_multi_slice_mode {
 #define V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX		(V4L2_CID_CODEC_BASE+233)
 #define V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES		(V4L2_CID_CODEC_BASE+234)
 #define V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR		(V4L2_CID_CODEC_BASE+235)
+#define V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD	(V4L2_CID_CODEC_BASE+236)
 
 /* CIDs for the MPEG-2 Part 2 (H.262) codec */
 #define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL			(V4L2_CID_CODEC_BASE+270)
-- 
2.25.1




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux