Handle errors of clk_prepare_enable() in csi2tx_get_resources(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@xxxxxxxxx> --- drivers/media/platform/cadence/cdns-csi2tx.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/media/platform/cadence/cdns-csi2tx.c b/drivers/media/platform/cadence/cdns-csi2tx.c index e4d08acfbb49..765ae408970a 100644 --- a/drivers/media/platform/cadence/cdns-csi2tx.c +++ b/drivers/media/platform/cadence/cdns-csi2tx.c @@ -436,6 +436,7 @@ static int csi2tx_get_resources(struct csi2tx_priv *csi2tx, struct resource *res; unsigned int i; u32 dev_cfg; + int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); csi2tx->base = devm_ioremap_resource(&pdev->dev, res); @@ -454,7 +455,12 @@ static int csi2tx_get_resources(struct csi2tx_priv *csi2tx, return PTR_ERR(csi2tx->esc_clk); } - clk_prepare_enable(csi2tx->p_clk); + ret = clk_prepare_enable(csi2tx->p_clk); + if (ret) { + dev_err(&pdev->dev, "Couldn't prepare and enable p_clk\n"); + return ret; + } + dev_cfg = readl(csi2tx->base + CSI2TX_DEVICE_CONFIG_REG); clk_disable_unprepare(csi2tx->p_clk); -- 2.26.2