Re: [PATCH v3 2/2] ipu3-cio2: Parse sensor orientation and rotation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Any other comments about this patch or is it ready to be merged?

Thanks,
Fabian

On 14.04.21 10:30, Fabian Wüthrich wrote:
> The sensor orientation is read from the _PLC ACPI buffer and converted to a v4l2
> format.
> 
> The sensor rotation is read from the SSDB ACPI buffer and converted into
> degrees.
> 
> Signed-off-by: Fabian Wüthrich <me@xxxxxxxx>
> Reviewed-by: Daniel Scally <djrscally@xxxxxxxxx>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> ---
>  drivers/media/pci/intel/ipu3/cio2-bridge.c | 60 ++++++++++++++++++++--
>  drivers/media/pci/intel/ipu3/cio2-bridge.h |  9 +++-
>  2 files changed, 64 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/media/pci/intel/ipu3/cio2-bridge.c b/drivers/media/pci/intel/ipu3/cio2-bridge.c
> index c2199042d3db..926141e9a516 100644
> --- a/drivers/media/pci/intel/ipu3/cio2-bridge.c
> +++ b/drivers/media/pci/intel/ipu3/cio2-bridge.c
> @@ -29,6 +29,7 @@ static const struct cio2_sensor_config cio2_supported_sensors[] = {
>  static const struct cio2_property_names prop_names = {
>  	.clock_frequency = "clock-frequency",
>  	.rotation = "rotation",
> +	.orientation = "orientation",
>  	.bus_type = "bus-type",
>  	.data_lanes = "data-lanes",
>  	.remote_endpoint = "remote-endpoint",
> @@ -72,11 +73,51 @@ static int cio2_bridge_read_acpi_buffer(struct acpi_device *adev, char *id,
>  	return ret;
>  }
>  
> +static u32 cio2_bridge_parse_rotation(struct cio2_sensor *sensor)
> +{
> +	switch (sensor->ssdb.degree) {
> +	case CIO2_SENSOR_ROTATION_NORMAL:
> +		return 0;
> +	case CIO2_SENSOR_ROTATION_INVERTED:
> +		return 180;
> +	default:
> +		dev_warn(&sensor->adev->dev,
> +			 "Unknown rotation %d. Assume 0 degree rotation\n",
> +			 sensor->ssdb.degree);
> +		return 0;
> +	}
> +}
> +
> +static enum v4l2_fwnode_orientation cio2_bridge_parse_orientation(struct cio2_sensor *sensor)
> +{
> +	switch (sensor->pld->panel) {
> +	case ACPI_PLD_PANEL_FRONT:
> +		return V4L2_FWNODE_ORIENTATION_FRONT;
> +	case ACPI_PLD_PANEL_BACK:
> +		return V4L2_FWNODE_ORIENTATION_BACK;
> +	case ACPI_PLD_PANEL_TOP:
> +	case ACPI_PLD_PANEL_LEFT:
> +	case ACPI_PLD_PANEL_RIGHT:
> +	case ACPI_PLD_PANEL_UNKNOWN:
> +		return V4L2_FWNODE_ORIENTATION_EXTERNAL;
> +	default:
> +		dev_warn(&sensor->adev->dev, "Unknown _PLD panel value %d\n",
> +			 sensor->pld->panel);
> +		return V4L2_FWNODE_ORIENTATION_EXTERNAL;
> +	}
> +}
> +
>  static void cio2_bridge_create_fwnode_properties(
>  	struct cio2_sensor *sensor,
>  	struct cio2_bridge *bridge,
>  	const struct cio2_sensor_config *cfg)
>  {
> +	u32 rotation;
> +	enum v4l2_fwnode_orientation orientation;
> +
> +	rotation = cio2_bridge_parse_rotation(sensor);
> +	orientation = cio2_bridge_parse_orientation(sensor);
> +
>  	sensor->prop_names = prop_names;
>  
>  	sensor->local_ref[0].node = &sensor->swnodes[SWNODE_CIO2_ENDPOINT];
> @@ -85,9 +126,12 @@ static void cio2_bridge_create_fwnode_properties(
>  	sensor->dev_properties[0] = PROPERTY_ENTRY_U32(
>  					sensor->prop_names.clock_frequency,
>  					sensor->ssdb.mclkspeed);
> -	sensor->dev_properties[1] = PROPERTY_ENTRY_U8(
> +	sensor->dev_properties[1] = PROPERTY_ENTRY_U32(
>  					sensor->prop_names.rotation,
> -					sensor->ssdb.degree);
> +					rotation);
> +	sensor->dev_properties[2] = PROPERTY_ENTRY_U32(
> +					sensor->prop_names.orientation,
> +					orientation);
>  
>  	sensor->ep_properties[0] = PROPERTY_ENTRY_U32(
>  					sensor->prop_names.bus_type,
> @@ -159,6 +203,7 @@ static void cio2_bridge_unregister_sensors(struct cio2_bridge *bridge)
>  	for (i = 0; i < bridge->n_sensors; i++) {
>  		sensor = &bridge->sensors[i];
>  		software_node_unregister_nodes(sensor->swnodes);
> +		ACPI_FREE(sensor->pld);
>  		acpi_dev_put(sensor->adev);
>  	}
>  }
> @@ -170,6 +215,7 @@ static int cio2_bridge_connect_sensor(const struct cio2_sensor_config *cfg,
>  	struct fwnode_handle *fwnode;
>  	struct cio2_sensor *sensor;
>  	struct acpi_device *adev;
> +	acpi_status status;
>  	int ret;
>  
>  	for_each_acpi_dev_match(adev, cfg->hid, NULL, -1) {
> @@ -193,11 +239,15 @@ static int cio2_bridge_connect_sensor(const struct cio2_sensor_config *cfg,
>  		if (ret)
>  			goto err_put_adev;
>  
> +		status = acpi_get_physical_device_location(adev->handle, &sensor->pld);
> +		if (ACPI_FAILURE(status))
> +			goto err_put_adev;
> +
>  		if (sensor->ssdb.lanes > CIO2_MAX_LANES) {
>  			dev_err(&adev->dev,
>  				"Number of lanes in SSDB is invalid\n");
>  			ret = -EINVAL;
> -			goto err_put_adev;
> +			goto err_free_pld;
>  		}
>  
>  		cio2_bridge_create_fwnode_properties(sensor, bridge, cfg);
> @@ -205,7 +255,7 @@ static int cio2_bridge_connect_sensor(const struct cio2_sensor_config *cfg,
>  
>  		ret = software_node_register_nodes(sensor->swnodes);
>  		if (ret)
> -			goto err_put_adev;
> +			goto err_free_pld;
>  
>  		fwnode = software_node_fwnode(&sensor->swnodes[
>  						      SWNODE_SENSOR_HID]);
> @@ -226,6 +276,8 @@ static int cio2_bridge_connect_sensor(const struct cio2_sensor_config *cfg,
>  
>  err_free_swnodes:
>  	software_node_unregister_nodes(sensor->swnodes);
> +err_free_pld:
> +	ACPI_FREE(sensor->pld);
>  err_put_adev:
>  	acpi_dev_put(sensor->adev);
>  err_out:
> diff --git a/drivers/media/pci/intel/ipu3/cio2-bridge.h b/drivers/media/pci/intel/ipu3/cio2-bridge.h
> index dd0ffcafa489..202c7d494f7a 100644
> --- a/drivers/media/pci/intel/ipu3/cio2-bridge.h
> +++ b/drivers/media/pci/intel/ipu3/cio2-bridge.h
> @@ -12,6 +12,10 @@
>  #define CIO2_MAX_LANES				4
>  #define MAX_NUM_LINK_FREQS			3
>  
> +/* Values are educated guesses as we don't have a spec */
> +#define CIO2_SENSOR_ROTATION_NORMAL		0
> +#define CIO2_SENSOR_ROTATION_INVERTED		1
> +
>  #define CIO2_SENSOR_CONFIG(_HID, _NR, ...)	\
>  	(const struct cio2_sensor_config) {	\
>  		.hid = _HID,			\
> @@ -80,6 +84,7 @@ struct cio2_sensor_ssdb {
>  struct cio2_property_names {
>  	char clock_frequency[16];
>  	char rotation[9];
> +	char orientation[12];
>  	char bus_type[9];
>  	char data_lanes[11];
>  	char remote_endpoint[16];
> @@ -106,9 +111,11 @@ struct cio2_sensor {
>  	struct cio2_node_names node_names;
>  
>  	struct cio2_sensor_ssdb ssdb;
> +	struct acpi_pld_info *pld;
> +
>  	struct cio2_property_names prop_names;
>  	struct property_entry ep_properties[5];
> -	struct property_entry dev_properties[3];
> +	struct property_entry dev_properties[4];
>  	struct property_entry cio2_properties[3];
>  	struct software_node_ref_args local_ref[1];
>  	struct software_node_ref_args remote_ref[1];
> 



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux