Hi Mauro,
Thank you for the patch.
On Wed, May 5, 2021 at 10:42 AM Mauro Carvalho Chehab
<mchehab+huawei@xxxxxxxxxx> wrote:
>
> The pm_runtime_get_sync() internally increments the
> dev->power.usage_count without decrementing it, even on errors.
> Replace it by the new pm_runtime_resume_and_get(), introduced by:
> commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
> in order to properly decrement the usage counter, avoiding
> a potential PM usage counter leak.
>
> While here, ensure that the driver will check if PM runtime
> resumed at vpfe_initialize_device().
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
> ---
> drivers/media/platform/am437x/am437x-vpfe.c | 15 +++++++++++++--
> 1 file changed, 13 insertions(+), 2 deletions(-)
>
Acked-by: Lad Prabhakar <prabhakar.csengg@xxxxxxxxx>
Cheers,
Prabhakar
> diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c
> index 6cdc77dda0e4..1c9cb9e05fdf 100644
> --- a/drivers/media/platform/am437x/am437x-vpfe.c
> +++ b/drivers/media/platform/am437x/am437x-vpfe.c
> @@ -1021,7 +1021,9 @@ static int vpfe_initialize_device(struct vpfe_device *vpfe)
> if (ret)
> return ret;
>
> - pm_runtime_get_sync(vpfe->pdev);
> + ret = pm_runtime_resume_and_get(vpfe->pdev);
> + if (ret < 0)
> + return ret;
>
> vpfe_config_enable(&vpfe->ccdc, 1);
>
> @@ -2443,7 +2445,11 @@ static int vpfe_probe(struct platform_device *pdev)
> pm_runtime_enable(&pdev->dev);
>
> /* for now just enable it here instead of waiting for the open */
> - pm_runtime_get_sync(&pdev->dev);
> + ret = pm_runtime_resume_and_get(&pdev->dev);
> + if (ret < 0) {
> + vpfe_err(vpfe, "Unable to resume device.\n");
> + goto probe_out_v4l2_unregister;
> + }
>
> vpfe_ccdc_config_defaults(ccdc);
>
> @@ -2530,6 +2536,11 @@ static int vpfe_suspend(struct device *dev)
>
> /* only do full suspend if streaming has started */
> if (vb2_start_streaming_called(&vpfe->buffer_queue)) {
> + /*
> + * ignore RPM resume errors here, as it is already too late.
> + * A check like that should happen earlier, either at
> + * open() or just before start streaming.
> + */
> pm_runtime_get_sync(dev);
> vpfe_config_enable(ccdc, 1);
>
> --
> 2.30.2
>
