Hello I would really appreciate some help.
I am trying to setup my TV HD tuner card and have encountered some problems.
In a nutshell:
I have /dev/dvb/adapter0
containing:
demux0 dvr0 frontend0 net0
but no /dev/video0
Some details:
Card: Leadtek DTV2000 DS Dual Tuner
Was not detected by OpenSuse 11.2
I tried building from the repo
(as described here:
http://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers)
but there were errors, so I grabbed from
http://linuxtv.org/hg/~anttip/af9015/
which was reported to work with the card
dmesg reported firmware missing, so I got dvb-usb-af9015.fw from
http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/
Now it loads
(from dmesg):
[ 8.436254] dvb-usb: found a 'Leadtek WinFast DTV2000DS' in warm state.
[ 8.436301] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[ 8.436653] DVB: registering new adapter (Leadtek WinFast DTV2000DS)
[ 8.644457] af9013: firmware version:4.95.0
[ 8.647825] DVB: registering adapter 0 frontend 0 (Afatech AF9013
DVB-T)...
[ 8.667594] tda18271 0-00c0: creating new instance
[ 8.670774] TDA18271HD/C2 detected @ 0-00c0
[ 8.852151] ath: EEPROM regdomain: 0x809c
[ 8.852153] ath: EEPROM indicates we should expect a country code
[ 8.852155] ath: doing EEPROM country->regdmn map search
[ 8.852156] ath: country maps to regdmn code: 0x52
[ 8.852158] ath: Country alpha2 being used: CN
[ 8.852159] ath: Regpair used: 0x52
[ 8.873794] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[ 8.874160] DVB: registering new adapter (Leadtek WinFast DTV2000DS)
[ 8.928654] phy0: Selected rate control algorithm 'minstrel'
[ 8.929117] cfg80211: Calling CRDA for country: CN
[ 8.929293] ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
[ 9.079590] af9013: found a 'Afatech AF9013 DVB-T' in warm state.
[ 9.082319] af9013: firmware version:4.95.0
[ 9.094043] DVB: registering adapter 1 frontend 0 (Afatech AF9013
DVB-T)...
[ 9.094211] tda18271 1-00c0: creating new instance
[ 9.096393] af9015: command failed:2
[ 9.098032] tda18271_read_regs: [1-00c0|M] ERROR: i2c_transfer
returned: -1
[ 9.098046] Unknown device detected @ 1-00c0, device not supported.
[ 9.100368] af9015: command failed:2
[ 9.101977] tda18271_read_regs: [1-00c0|M] ERROR: i2c_transfer
returned: -1
[ 9.101990] Unknown device detected @ 1-00c0, device not supported.
[ 9.101995] tda18271_attach: [1-00c0|M] error -22 on line 1272
[ 9.102005] tda18271 1-00c0: destroying instance
[ 9.102165] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1e.0/0000:07:01.2/usb3/3-1/input/input5
[ 9.102193] dvb-usb: schedule remote query interval to 150 msecs.
[ 9.102196] dvb-usb: Leadtek WinFast DTV2000DS successfully
initialized and connected.
[ 9.245040] usbcore: registered new interface driver dvb_usb_af9015
But /dev/video0 does not exist which means none of the TV software works.
I don't know what to try next. Any help would be awesome.
Thanks,
Cliffe.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
