Hi Tomi,
Thank you for the patch.
On Tue, Apr 27, 2021 at 04:20:26PM +0300, Tomi Valkeinen wrote:
> Use get_frame_desc() to get the frame desc from the connected source,
> and use the provided virtual channel and datatype instead of hardcoded
> ones.
>
> get_frame_desc() works per stream, but as we don't support multiple
> streams yet, we will just always use stream 0.
>
> If the source doesn't support get_frame_desc(), fall back to the
> previous method of always capturing virtual channel 0 and any datatype.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/platform/ti-vpe/cal-camerarx.c | 26 +++++++++++
> drivers/media/platform/ti-vpe/cal.c | 49 +++++++++++++++++++-
> drivers/media/platform/ti-vpe/cal.h | 3 ++
> 3 files changed, 76 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/ti-vpe/cal-camerarx.c b/drivers/media/platform/ti-vpe/cal-camerarx.c
> index a4b783e038b5..36103f5af6e9 100644
> --- a/drivers/media/platform/ti-vpe/cal-camerarx.c
> +++ b/drivers/media/platform/ti-vpe/cal-camerarx.c
> @@ -583,6 +583,32 @@ static int cal_camerarx_parse_dt(struct cal_camerarx *phy)
> return ret;
> }
>
> +int cal_camerarx_get_remote_frame_desc(struct cal_camerarx *phy,
> + struct v4l2_mbus_frame_desc *fd)
> +{
> + struct media_pad *pad;
> + int ret;
> +
> + if (!phy->source)
> + return -ENODEV;
> +
> + pad = media_entity_remote_pad(&phy->pads[CAL_CAMERARX_PAD_SINK]);
> + if (!pad)
> + return -ENODEV;
> +
> + ret = v4l2_subdev_call(phy->source, pad, get_frame_desc, pad->index,
> + fd);
> + if (ret)
> + return ret;
> +
> + if (fd->type != V4L2_MBUS_FRAME_DESC_TYPE_CSI2) {
> + dev_err(phy->cal->dev, "Frame desc do not describe CSI-2 link");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> /* ------------------------------------------------------------------
> * V4L2 Subdev Operations
> * ------------------------------------------------------------------
> diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
> index fcc81024ae18..7975bb449acd 100644
> --- a/drivers/media/platform/ti-vpe/cal.c
> +++ b/drivers/media/platform/ti-vpe/cal.c
> @@ -469,10 +469,56 @@ static bool cal_ctx_wr_dma_stopped(struct cal_ctx *ctx)
> return stopped;
> }
>
> +static int
> +cal_get_remote_frame_desc_entry(struct cal_camerarx *phy, u32 stream,
As this isn't a camerarx function, would it be better to pass the
cal_ctx pointer instead ?
> + struct v4l2_mbus_frame_desc_entry *entry)
> +{
> + struct v4l2_mbus_frame_desc fd;
> + unsigned int i;
> + int ret;
> +
> + ret = cal_camerarx_get_remote_frame_desc(phy, &fd);
> + if (ret) {
> + if (ret != -ENOIOCTLCMD)
> + dev_err(phy->cal->dev,
> + "Failed to get remote frame desc: %d\n", ret);
Should we drop this message as the caller also prints one ?
> + return ret;
> + }
> +
> + for (i = 0; i < fd.num_entries; i++) {
> + if (stream == fd.entry[i].stream) {
> + *entry = fd.entry[i];
> + return 0;
> + }
> + }
> +
> + return -ENODEV;
> +}
> +
> int cal_ctx_prepare(struct cal_ctx *ctx)
> {
> + struct v4l2_mbus_frame_desc_entry entry;
> int ret;
>
> + ret = cal_get_remote_frame_desc_entry(ctx->phy, ctx->stream, &entry);
> +
> + if (ret == -ENOIOCTLCMD) {
> + ctx->vc = 0;
> + ctx->datatype = CAL_CSI2_CTX_DT_ANY;
I'd have moved this after the !ret case, but that's very personal.
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> + } else if (!ret) {
> + ctx_dbg(2, ctx, "Framedesc: stream %u, len %u, vc %u, dt %#x\n",
> + entry.stream,
> + entry.length,
> + entry.bus.csi2.vc,
> + entry.bus.csi2.dt);
> +
> + ctx->vc = entry.bus.csi2.vc;
> + ctx->datatype = entry.bus.csi2.dt;
> + } else {
> + ctx_err(ctx, "Failed to get remote frame desc: %d\n", ret);
> + return ret;
> + }
> +
> ctx->use_pix_proc = !ctx->fmtinfo->meta;
>
> if (ctx->use_pix_proc) {
> @@ -925,8 +971,7 @@ static struct cal_ctx *cal_ctx_create(struct cal_dev *cal, int inst)
> ctx->dma_ctx = inst;
> ctx->csi2_ctx = inst;
> ctx->cport = inst;
> - ctx->vc = 0;
> - ctx->datatype = CAL_CSI2_CTX_DT_ANY;
> + ctx->stream = 0;
>
> ret = cal_ctx_v4l2_init(ctx);
> if (ret)
> diff --git a/drivers/media/platform/ti-vpe/cal.h b/drivers/media/platform/ti-vpe/cal.h
> index 29b865d1a238..3aea444f8bf8 100644
> --- a/drivers/media/platform/ti-vpe/cal.h
> +++ b/drivers/media/platform/ti-vpe/cal.h
> @@ -245,6 +245,7 @@ struct cal_ctx {
> u8 pix_proc;
> u8 vc;
> u8 datatype;
> + u32 stream;
>
> bool use_pix_proc;
> };
> @@ -318,6 +319,8 @@ const struct cal_format_info *cal_format_by_code(u32 code);
>
> void cal_quickdump_regs(struct cal_dev *cal);
>
> +int cal_camerarx_get_remote_frame_desc(struct cal_camerarx *phy,
> + struct v4l2_mbus_frame_desc *fd);
> void cal_camerarx_disable(struct cal_camerarx *phy);
> void cal_camerarx_i913_errata(struct cal_camerarx *phy);
> struct cal_camerarx *cal_camerarx_create(struct cal_dev *cal,
--
Regards,
Laurent Pinchart
