Re: [PATCH v3 79/79] media: hantro: document the usage of pm_runtime_get_sync()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Em Wed, 28 Apr 2021 08:27:42 +0200
Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> escreveu:

> Em Tue, 27 Apr 2021 12:18:32 -0300
> Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx> escreveu:
> 
> > On Tue, 2021-04-27 at 16:08 +0100, Robin Murphy wrote:  
> > > On 2021-04-27 11:27, Mauro Carvalho Chehab wrote:    
> > > > Despite other *_get()/*_put() functions, where usage count is
> > > > incremented only if not errors, the pm_runtime_get_sync() has
> > > > a different behavior, incrementing the counter *even* on
> > > > errors.
> > > > 
> > > > That's an error prone behavior, as people often forget to
> > > > decrement the usage counter.
> > > > 
> > > > However, the hantro driver depends on this behavior, as it
> > > > will decrement the usage_count unconditionally at the m2m
> > > > job finish time, which makes sense.
> > > > 
> > > > So, intead of using the pm_runtime_resume_and_get() that
> > > > would decrement the counter on error, keep the current
> > > > API, but add a documentation explaining the rationale for
> > > > keep using pm_runtime_get_sync().
> > > > 
> > > > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
> > > > ---
> > > >   drivers/staging/media/hantro/hantro_drv.c | 7 +++++++
> > > >   1 file changed, 7 insertions(+)
> > > > 
> > > > diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
> > > > index 595e82a82728..96f940c1c85c 100644
> > > > --- a/drivers/staging/media/hantro/hantro_drv.c
> > > > +++ b/drivers/staging/media/hantro/hantro_drv.c
> > > > @@ -155,6 +155,13 @@ static void device_run(void *priv)
> > > >         ret = clk_bulk_enable(ctx->dev->variant->num_clocks, ctx->dev->clocks);
> > > >         if (ret)
> > > >                 goto err_cancel_job;    
> > > 
> > > ..except this can also cause the same pm_runtime_put_autosuspend() call 
> > > without even reaching the "matching" get below, so rather than some kind 
> > > of cleverness it seems more like it's just broken :/
> > >     
> > 
> > Indeed, I was trying to find time to cook a quick patch, but kept
> > getting preempted.
> > 
> > Feel free to submit a fix for this, otherwise, I'll try to find
> > time later this week.  
> 
> What about doing this instead:
> 
> diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
> index 595e82a82728..67de6b15236d 100644
> --- a/drivers/staging/media/hantro/hantro_drv.c
> +++ b/drivers/staging/media/hantro/hantro_drv.c
> @@ -56,14 +56,12 @@ dma_addr_t hantro_get_ref(struct hantro_ctx *ctx, u64 ts)
>  	return hantro_get_dec_buf_addr(ctx, buf);
>  }
>  
> -static void hantro_job_finish(struct hantro_dev *vpu,
> -			      struct hantro_ctx *ctx,
> -			      enum vb2_buffer_state result)
> +static void hantro_job_finish_no_pm(struct hantro_dev *vpu,
> +				    struct hantro_ctx *ctx,
> +				    enum vb2_buffer_state result)
>  {
>  	struct vb2_v4l2_buffer *src, *dst;
>  
> -	pm_runtime_mark_last_busy(vpu->dev);
> -	pm_runtime_put_autosuspend(vpu->dev);
>  	clk_bulk_disable(vpu->variant->num_clocks, vpu->clocks);
>  
>  	src = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
> @@ -81,6 +79,16 @@ static void hantro_job_finish(struct hantro_dev *vpu,
>  					 result);
>  }
>  
> +static void hantro_job_finish(struct hantro_dev *vpu,
> +			      struct hantro_ctx *ctx,
> +			      enum vb2_buffer_state result)
> +{
> +	pm_runtime_mark_last_busy(vpu->dev);
> +	pm_runtime_put_autosuspend(vpu->dev);
> +
> +	hantro_job_finish_no_pm(vpu, ctx, result);
> +}
> +
>  void hantro_irq_done(struct hantro_dev *vpu,
>  		     enum vb2_buffer_state result)
>  {
> @@ -152,12 +160,13 @@ static void device_run(void *priv)
>  	src = hantro_get_src_buf(ctx);
>  	dst = hantro_get_dst_buf(ctx);
>  
> +	ret = pm_runtime_resume_and_get(ctx->dev->dev);
> +	if (ret < 0)
> +		goto err_cancel_job;
> +
>  	ret = clk_bulk_enable(ctx->dev->variant->num_clocks, ctx->dev->clocks);
>  	if (ret)
>  		goto err_cancel_job;
> -	ret = pm_runtime_get_sync(ctx->dev->dev);
> -	if (ret < 0)
> -		goto err_cancel_job;
>  
>  	v4l2_m2m_buf_copy_metadata(src, dst, true);
>  
> @@ -165,7 +174,7 @@ static void device_run(void *priv)
>  	return;
>  
>  err_cancel_job:
> -	hantro_job_finish(ctx->dev, ctx, VB2_BUF_STATE_ERROR);
> +	hantro_job_finish_no_pm(ctx->dev, ctx, VB2_BUF_STATE_ERROR);
>  }
>  
>  static struct v4l2_m2m_ops vpu_m2m_ops = {
> 
> Thanks,
> Mauro

Actually, the order at the finish logic should change as well.
Maybe like this:

<snip>
static void hantro_job_finish_no_pm(struct hantro_dev *vpu,
				    struct hantro_ctx *ctx,
				    enum vb2_buffer_state result)
{
	struct vb2_v4l2_buffer *src, *dst;

	src = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
	dst = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);

	if (WARN_ON(!src))
		return;
	if (WARN_ON(!dst))
		return;

	src->sequence = ctx->sequence_out++;
	dst->sequence = ctx->sequence_cap++;

	v4l2_m2m_buf_done_and_job_finish(ctx->dev->m2m_dev, ctx->fh.m2m_ctx,
					 result);
}

static void hantro_job_finish(struct hantro_dev *vpu,
			      struct hantro_ctx *ctx,
			      enum vb2_buffer_state result)
{

	hantro_job_finish_no_pm(vpu, ctx, result);

	clk_bulk_disable(vpu->variant->num_clocks, vpu->clocks);

	pm_runtime_mark_last_busy(vpu->dev);
	pm_runtime_put_autosuspend(vpu->dev);
}

static void device_run(void *priv)
{
	struct hantro_ctx *ctx = priv;
	struct vb2_v4l2_buffer *src, *dst;
	int ret;

	src = hantro_get_src_buf(ctx);
	dst = hantro_get_dst_buf(ctx);

	ret = pm_runtime_resume_and_get(ctx->dev->dev);
	if (ret < 0)
		goto err_cancel_job;

	ret = clk_bulk_enable(ctx->dev->variant->num_clocks, ctx->dev->clocks);
	if (ret)
		goto err_cancel_job;

	v4l2_m2m_buf_copy_metadata(src, dst, true);

	ctx->codec_ops->run(ctx);
	return;

err_cancel_job:
	hantro_job_finish_no_pm(ctx->dev, ctx, VB2_BUF_STATE_ERROR);
}
</snip>


Thanks,
Mauro




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux