Re: [PATCH 27/28] media: ti-vpe: cal: remove cal_camerarx->fmtinfo

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 18/04/2021 16:24, Laurent Pinchart wrote:
Hi Tomi,

Thank you for the patch.

On Mon, Apr 12, 2021 at 02:34:56PM +0300, Tomi Valkeinen wrote:
struct cal_camerarx has fmtinfo field which is used to point to the
current active input format. The only place where the field is used is
cal_camerarx_get_ext_link_freq().

With multiple streams the whole concept of single input format is not
valid anymore, so lets remove the field by looking up the format in
cal_camerarx_get_ext_link_freq(), making it easier to handle the
multistream-case in the following patches.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
---
  drivers/media/platform/ti-vpe/cal-camerarx.c | 12 ++++++++----
  drivers/media/platform/ti-vpe/cal.h          |  1 -
  2 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/ti-vpe/cal-camerarx.c b/drivers/media/platform/ti-vpe/cal-camerarx.c
index 25f4692d210e..efe6513d69e8 100644
--- a/drivers/media/platform/ti-vpe/cal-camerarx.c
+++ b/drivers/media/platform/ti-vpe/cal-camerarx.c
@@ -49,8 +49,15 @@ static s64 cal_camerarx_get_ext_link_freq(struct cal_camerarx *phy)
  {
  	struct v4l2_fwnode_bus_mipi_csi2 *mipi_csi2 = &phy->endpoint.bus.mipi_csi2;
  	u32 num_lanes = mipi_csi2->num_data_lanes;
-	u32 bpp = phy->fmtinfo->bpp;
+	u32 bpp;
  	s64 freq;
+	const struct cal_format_info *fmtinfo;

I'd declare this after num_lanes as I like the reverse xmas tree order.

+
+	fmtinfo = cal_format_by_code(phy->formats[CAL_CAMERARX_PAD_SINK].code);
+	if (!fmtinfo)
+		return -EINVAL;
+
+	bpp = fmtinfo->bpp;

I wonder if we'll end up dropping this, as falling back to
V4L2_CID_PIXEL_RATE in v4l2_get_link_freq() makes less sense when using
multiplexed streams. Something to worry about later.

You're right, it goes behind an if in an unposted patch:

if (cal_streams_api) {
	bpp = 0;
} else {
	const struct cal_format_info *fmtinfo;

	fmtinfo = cal_format_by_code(phy->formats[CAL_CAMERARX_PAD_SINK].code);
	if (!fmtinfo)
		return -EINVAL;

	bpp = fmtinfo->bpp;
}

and calling v4l2_get_link_freq with mul == 0 (bpp) will result in ENOENT if
V4L2_CID_LINK_FREQ is not available.

 Tomi



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux