From: dillon min <dillon.minfei@xxxxxxxxx> This patchset aims to add kernel support on DaSheng COM-8XX SBC board optimize ov2659 driver to handle xvclk on/off at proper stage to save power changes based on master branch, since commit id: 89698becf06d341a700913c3d89ce2a914af69a2 The DaSheng Com-9xx is and ARM based signle board computer (SBC) featuring: - i.MX6Q - 2GiB LPDDR3 DRAM - 8GiB eMMC 5.0 FLASH - 4MiB SPI Flash - USB 2.0 Host/Device - Multiple multi-protocol RS232/RS485 Serial ports - microSD socket - 5V DC power input - HDMI1.4a,1080p@60 - RGMIIx1 Gigabit Ethernet - CSI0x1, connect with ov2659 --- v3: - optimize commit message for patch v3 ov2659 part - move 'imx6q-ds.dtb' after 'imx6q-dms-ba16.dtb' to follow the alphabetical order (arch/arm/boot/dts/Makefile) - move 'ds,imx6q-sbc' after 'dmo,imx6q-edmqmx6' to follow the alphabetical order. (Documentation/devicetree/bindings/arm/fsl.yaml) - move v2 patch 4 to v3 patch 1 - add 'Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>' for [PATCH v3 1/4] - v2 link: https://lore.kernel.org/linux-arm-kernel/1618383117-17179-1-git-send-email-dillon.minfei@xxxxxxxxx/T/#md2dc86ac665ed7f10cffe4909825b97608805d3f v2: - add "[PATCH v2 4/4] dt-bindings: add dasheng vendor prefix" to fix checkpatch.pl warning. dillon min (4): dt-bindings: add dasheng vendor prefix dt-bindings: arm: imx: Add i.mx6q DaSheng COM-9XX SBC arm: dts: imx: Add i.mx6q DaSheng COM-9XX SBC board support media: i2c: ov2659: Use clk_{prepare_enable,disable_unprepare}() to set xvclk on/off Documentation/devicetree/bindings/arm/fsl.yaml | 1 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-ds.dts | 17 + arch/arm/boot/dts/imx6qdl-ds.dtsi | 465 +++++++++++++++++++++ drivers/media/i2c/ov2659.c | 24 +- 6 files changed, 504 insertions(+), 6 deletions(-) create mode 100644 arch/arm/boot/dts/imx6q-ds.dts create mode 100644 arch/arm/boot/dts/imx6qdl-ds.dtsi -- 2.7.4
