The mt8192 iommu support 0~16GB iova. We separate it to four banks: 0~4G; 4G~8G; 8G~12G; 12G~16G. The "dma-ranges" could be used to adjust the bank we locate. If we don't set this property. The default range always is 0~4G. Here we don't have actual bus/parent concept here. And the iova requirement is for our HW. Thus put the property in our node. Signed-off-by: Irui Wang <irui.wang@xxxxxxxxxxxx> --- Documentation/devicetree/bindings/media/mediatek-vcodec.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt index 06db6837cefd..b7801e3c354a 100644 --- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt @@ -22,6 +22,8 @@ Required properties: - iommus : should point to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details. +- dma-ranges : describes how the physical address space of the IOMMU maps + to memory. One of the two following nodes: - mediatek,vpu : the node of the video processor unit, if using VPU. - mediatek,scp : the node of the SCP unit, if using SCP. -- 2.25.1
