From: wengjianfeng <wengjianfeng@xxxxxxxxxx>
change 'purpous' to 'purpose'.
change 'frequecy' to 'frequency'.
remove redundant words struct and enum.
Signed-off-by: wengjianfeng <wengjianfeng@xxxxxxxxxx>
---
drivers/media/dvb-frontends/drx39xyj/drxj.h | 35 +++++++++++++++--------------
1 file changed, 18 insertions(+), 17 deletions(-)
diff --git a/drivers/media/dvb-frontends/drx39xyj/drxj.h b/drivers/media/dvb-frontends/drx39xyj/drxj.h
index d62412f..232b3b0 100644
--- a/drivers/media/dvb-frontends/drx39xyj/drxj.h
+++ b/drivers/media/dvb-frontends/drx39xyj/drxj.h
@@ -75,9 +75,9 @@
u16 result_len;
/*< result length in byte */
u16 *parameter;
- /*< General purpous param */
+ /*< General purpose param */
u16 *result;
- /*< General purpous param */};
+ /*< General purpose param */};
/*============================================================================*/
/*============================================================================*/
@@ -131,7 +131,7 @@
DRXJ_CFG_MAX /* dummy, never to be used */};
/*
-* /struct enum drxj_cfg_smart_ant_io * smart antenna i/o.
+* /enum drxj_cfg_smart_ant_io * smart antenna i/o.
*/
enum drxj_cfg_smart_ant_io {
DRXJ_SMT_ANT_OUTPUT = 0,
@@ -139,7 +139,7 @@ enum drxj_cfg_smart_ant_io {
};
/*
-* /struct struct drxj_cfg_smart_ant * Set smart antenna.
+* /struct drxj_cfg_smart_ant * Set smart antenna.
*/
struct drxj_cfg_smart_ant {
enum drxj_cfg_smart_ant_io io;
@@ -159,7 +159,7 @@ struct drxj_agc_status {
/* DRXJ_CFG_AGC_RF, DRXJ_CFG_AGC_IF */
/*
-* /struct enum drxj_agc_ctrl_mode * Available AGCs modes in the DRXJ.
+* /enum drxj_agc_ctrl_mode * Available AGCs modes in the DRXJ.
*/
enum drxj_agc_ctrl_mode {
DRX_AGC_CTRL_AUTO = 0,
@@ -167,7 +167,7 @@ struct drxj_agc_status {
DRX_AGC_CTRL_OFF};
/*
-* /struct struct drxj_cfg_agc * Generic interface for all AGCs present on the DRXJ.
+* /struct drxj_cfg_agc * Generic interface for all AGCs present on the DRXJ.
*/
struct drxj_cfg_agc {
enum drx_standard standard; /* standard for which these settings apply */
@@ -183,7 +183,7 @@ struct drxj_agc_status {
/* DRXJ_CFG_PRE_SAW */
/*
-* /struct struct drxj_cfg_pre_saw * Interface to configure pre SAW sense.
+* /struct drxj_cfg_pre_saw * Interface to configure pre SAW sense.
*/
struct drxj_cfg_pre_saw {
enum drx_standard standard; /* standard to which these settings apply */
@@ -193,7 +193,7 @@ struct drxj_agc_status {
/* DRXJ_CFG_AFE_GAIN */
/*
-* /struct struct drxj_cfg_afe_gain * Interface to configure gain of AFE (LNA + PGA).
+* /struct drxj_cfg_afe_gain * Interface to configure gain of AFE (LNA + PGA).
*/
struct drxj_cfg_afe_gain {
enum drx_standard standard; /* standard to which these settings apply */
@@ -220,14 +220,14 @@ struct drxj_agc_status {
};
/*
-* /struct struct drxj_cfg_vsb_misc * symbol error rate
+* /struct drxj_cfg_vsb_misc * symbol error rate
*/
struct drxj_cfg_vsb_misc {
u32 symb_error;
/*< symbol error rate sps */};
/*
-* /enum enum drxj_mpeg_output_clock_rate * Mpeg output clock rate.
+* /enum drxj_mpeg_output_clock_rate * Mpeg output clock rate.
*
*/
enum drxj_mpeg_start_width {
@@ -235,7 +235,7 @@ struct drxj_agc_status {
DRXJ_MPEG_START_WIDTH_8CLKCYC};
/*
-* /enum enum drxj_mpeg_output_clock_rate * Mpeg output clock rate.
+* /enum drxj_mpeg_output_clock_rate * Mpeg output clock rate.
*
*/
enum drxj_mpeg_output_clock_rate {
@@ -261,7 +261,7 @@ struct drxj_agc_status {
enum drxj_mpeg_start_width mpeg_start_width; /*< set MPEG output start width */};
/*
-* /enum enum drxj_xtal_freq * Supported external crystal reference frequency.
+* /enum drxj_xtal_freq * Supported external crystal reference frequency.
*/
enum drxj_xtal_freq {
DRXJ_XTAL_FREQ_RSVD,
@@ -270,14 +270,15 @@ struct drxj_agc_status {
DRXJ_XTAL_FREQ_4MHZ};
/*
-* /enum enum drxj_xtal_freq * Supported external crystal reference frequency.
+* /enum drxj_xtal_freq * Supported external crystal reference frequency.
*/
enum drxji2c_speed {
DRXJ_I2C_SPEED_400KBPS,
DRXJ_I2C_SPEED_100KBPS};
/*
-* /struct struct drxj_cfg_hw_cfg * Get hw configuration, such as crystal reference frequency, I2C speed, etc...
+* /struct drxj_cfg_hw_cfg * Get hw configuration, such as crystal
+* reference frequency, I2C speed, etc...
*/
struct drxj_cfg_hw_cfg {
enum drxj_xtal_freq xtal_freq;
@@ -364,7 +365,7 @@ struct drxj_cfg_oob_misc {
DRXJ_SIF_ATTENUATION_9DB};
/*
-* /struct struct drxj_cfg_atv_output * SIF attenuation setting.
+* /struct drxj_cfg_atv_output * SIF attenuation setting.
*
*/
struct drxj_cfg_atv_output {
@@ -453,10 +454,10 @@ struct drxj_cfg_atv_output {
enum drxuio_mode uio_gpio_mode; /*< current mode of ASEL pin */
enum drxuio_mode uio_irqn_mode; /*< current mode of IRQN pin */
- /* IQM fs frequecy shift and inversion */
+ /* IQM fs frequency shift and inversion */
u32 iqm_fs_rate_ofs; /*< frequency shifter setting after setchannel */
bool pos_image; /*< True: positive image */
- /* IQM RC frequecy shift */
+ /* IQM RC frequency shift */
u32 iqm_rc_rate_ofs; /*< frequency shifter setting after setchannel */
/* ATV configuration */
--
1.9.1
