Re: [PATCH 11/16] dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/04/21 04:24PM, Péter Ujfalusi wrote:
> Hi Pratyush,
> 
> On 3/30/21 8:33 PM, Pratyush Yadav wrote:
> > The CSI2RX subsystem uses PSI-L DMA to transfer frames to memory. It can
> > have up to 32 threads but the current driver only supports using one. So
> > add an entry for that one thread.
> 
> If you are absolutely sure that the other threads are not going to be
> used, then:

The opposite in fact. I do expect other threads to be used in the 
future. But the current driver can only use one so I figured it is 
better to add just the thread that is currently needed and then I can 
always add the rest later.

Why does this have to be a one-and-done deal? Is there anything wrong 
with adding the other threads when the driver can actually use them?

> Acked-by: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
> 
> but I would consider adding the other threads if there is a chance that
> the cs2rx will need to support it in the future.
> 
> > Signed-off-by: Pratyush Yadav <p.yadav@xxxxxx>
> > ---
> >  drivers/dma/ti/k3-psil-j721e.c | 10 ++++++++++
> >  1 file changed, 10 insertions(+)
> > 
> > diff --git a/drivers/dma/ti/k3-psil-j721e.c b/drivers/dma/ti/k3-psil-j721e.c
> > index 7580870ed746..19ffa31e6dc6 100644
> > --- a/drivers/dma/ti/k3-psil-j721e.c
> > +++ b/drivers/dma/ti/k3-psil-j721e.c
> > @@ -58,6 +58,14 @@
> >  		},					\
> >  	}
> >  
> > +#define PSIL_CSI2RX(x)					\
> > +	{						\
> > +		.thread_id = x,				\
> > +		.ep_config = {				\
> > +			.ep_type = PSIL_EP_NATIVE,	\
> > +		},					\
> > +	}
> > +
> >  /* PSI-L source thread IDs, used for RX (DMA_DEV_TO_MEM) */
> >  static struct psil_ep j721e_src_ep_map[] = {
> >  	/* SA2UL */
> > @@ -138,6 +146,8 @@ static struct psil_ep j721e_src_ep_map[] = {
> >  	PSIL_PDMA_XY_PKT(0x4707),
> >  	PSIL_PDMA_XY_PKT(0x4708),
> >  	PSIL_PDMA_XY_PKT(0x4709),
> > +	/* CSI2RX */
> > +	PSIL_CSI2RX(0x4940),
> >  	/* CPSW9 */
> >  	PSIL_ETHERNET(0x4a00),
> >  	/* CPSW0 */
> > 
> 
> -- 
> Péter

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux