2010/5/7 Владимир Чернышев <volch5@xxxxxxxxx>: > Hello. > > I try to plug Leadtek WinFast TV USB II (LR6021 Rev. C) to my Ubuntu > 10.04 (2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 > i686 GNU/Linux with all latest security and updates ). First I try > card=8 - no results, then I try card=28 (because in Windows it seems > like Leadtek WinFast TV USB II Deluxe) - TV works fine, tvtime scans > all available channels, but no sound in any audio standards > (/dev/mixer:line1 is ok with other sources). If I start tuner in > Windows, make hard reset, boot Ubuntu and start tvtime then audio > works fine at all channels while tuner is powered on. So I think > em28xx doesn't execute some initializing sequence for turn on audio. > > With latest version from http://linuxtv.org/hg/v4l-dvb my tuner works > only if i change SAA7115_COMPOSITE4 to SAA7115_COMPOSITE2 in > EM28XX_VMUX_TELEVISION section for Leadtek WinFast TV USB II Deluxe in > em28xx-cards.c and only video too. /dev/radio detected but not work > too. > > Any tips, recommendations? I don't want use Windows to tuner init only :) > > The peace of dmesg when I don't set card: > > em28xx #0: found i2c device @ 0x30 [???] > em28xx #0: found i2c device @ 0x3e [???] > em28xx #0: found i2c device @ 0x4a [saa7113h] > em28xx #0: found i2c device @ 0x86 [tda9887] > em28xx #0: found i2c device @ 0xb0 [tda9874] > em28xx #0: found i2c device @ 0xc2 [tuner (analog)] > em28xx #0: Board i2c devicelist hash is 0x81bb00dc > > dmesg with "original" (srcversion: AC6C6B6C3CB530BED33DFD3) em28xx > > em28xx: New device @ 480 Mbps (eb1a:2820, interface 0, class 0) > em28xx #0: chip ID is em2820 (or em2710) > em28xx #0: board has no eeprom > em28xx #0: Identified as Leadtek Winfast USB II Deluxe (card=28) > em28xx #0: > em28xx #0: The support for this board weren't valid yet. > em28xx #0: Please send a report of having this working > em28xx #0: not to V4L mailing list (and/or to other addresses) > saa7115 2-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0) > tuner 2-0043: chip found @ 0x86 (em28xx #0) > tda9887 2-0043: creating new instance > tda9887 2-0043: tda988[5/6/7] found > tuner 2-0061: chip found @ 0xc2 (em28xx #0) > tuner-simple 2-0061: creating new instance > tuner-simple 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) > em28xx #0: Config register raw data: 0x00 > em28xx #0: v4l2 driver version 0.1.2 > em28xx #0: V4L2 video device registered as /dev/video0 > usbcore: registered new interface driver em28xx > em28xx driver loaded > > dmesg with latest (srcversion: 7B6A05D4D518CB79FF69F9D) em28xx (with > minor change sad above). > > em28xx: New device @ 480 Mbps (eb1a:2820, interface 0, class 0) > em28xx #0: chip ID is em2820 (or em2710) > em28xx #0: board has no eeprom > input: i2c IR (i2c IR (EM2820 Winfast as /devices/virtual/irrcv/irrcv0/input7 > irrcv0: i2c IR (i2c IR (EM2820 Winfast as /devices/virtual/irrcv/irrcv0 > ir-kbd-i2c: i2c IR (i2c IR (EM2820 Winfast detected at > i2c-2/2-001f/ir0 [em28xx #0] > em28xx #0: Identified as Leadtek Winfast USB II Deluxe (card=28) > em28xx #0: > em28xx #0: The support for this board weren't valid yet. > em28xx #0: Please send a report of having this working > em28xx #0: not to V4L mailing list (and/or to other addresses) > saa7115 2-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0) > tvaudio 2-0058: found tda9874a. > tvaudio 2-0058: tda9874h/a found @ 0xb0 (em28xx #0) > tuner 2-0000: chip found @ 0x0 (em28xx #0) > tuner 2-0043: chip found @ 0x86 (em28xx #0) > tda9887 2-0043: creating new instance > tda9887 2-0043: tda988[5/6/7] found > tuner 2-0061: chip found @ 0xc2 (em28xx #0) > tuner-simple 2-0000: unable to probe Alps TSBE1, proceeding anyway. > tuner-simple 2-0000: creating new instance > tuner-simple 2-0000: type set to 10 (Alps TSBE1) > tuner-simple 2-0061: creating new instance > tuner-simple 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) > em28xx #0: Config register raw data: 0x00 > em28xx #0: v4l2 driver version 0.1.2 > em28xx #0: Registered radio device as radio0 > em28xx #0: V4L2 video device registered as video0 > usbcore: registered new interface driver em28xx > em28xx driver loaded > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Hi, the main problem (I think) is that your box doesn't support audio over usb. So when you use the "card=28" option, it doesn't turn on the audio output connector. Your box has a Em2800 chip, where the "Deluxe" version uses a Em2820. I'll take a look at the code when I comes home, maybe I can figure something out. Your box is supposed to be supported but maybe some regression in the codes has happend. /Magnus -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
