On 3/23/21 8:29 PM, Xiaofeng Cao wrote:
> change 'vodeo' to 'video'
> change 'nevery' to 'never'
> change 'is' to 'it'
> change 'connevted' to 'connected'
> change 'swichers' to 'switchers'
> change 'strucure' to 'structure'
> change 'unblanced' to 'unbalanced'
> change 'fonctionality' to 'functionality'
>
> Signed-off-by: Xiaofeng Cao <caoxiaofeng@xxxxxxxxxx>
LGTM. Thanks.
Acked-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
> ---
> v2: resume space and change 'USED' to 'USE'
> drivers/media/pci/bt8xx/bttv-cards.c | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/media/pci/bt8xx/bttv-cards.c b/drivers/media/pci/bt8xx/bttv-cards.c
> index ca20b806e82d..c2b5ab287dd7 100644
> --- a/drivers/media/pci/bt8xx/bttv-cards.c
> +++ b/drivers/media/pci/bt8xx/bttv-cards.c
> @@ -2011,7 +2011,7 @@ struct tvcard bttv_tvcards[] = {
> /* .audio_inputs= 0, */
> .svhs = 9,
> .gpiomask = 0x00,
> - .gpiomask2 = 0x03, /* used for external vodeo mux */
> + .gpiomask2 = 0x03, /* used for external video mux */
> .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
> .muxsel_hook = phytec_muxsel,
> .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
> @@ -2025,7 +2025,7 @@ struct tvcard bttv_tvcards[] = {
> /* .audio_inputs= 0, */
> .svhs = 9,
> .gpiomask = 0x00,
> - .gpiomask2 = 0x03, /* used for external vodeo mux */
> + .gpiomask2 = 0x03, /* used for external video mux */
> .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
> .muxsel_hook = phytec_muxsel,
> .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
> @@ -2180,8 +2180,8 @@ struct tvcard bttv_tvcards[] = {
> [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
> /*Eric DEBIEF <debief@xxxxxxxxxxx>*/
> /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
> - /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
> - /*0x79 in bttv.h*/
> + /*adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration*/
> + /*structure and #define BTTV_BOARD_PICOLO_TETRA_CHIP 0x79 in bttv.h*/
> .name = "Euresys Picolo Tetra",
> .video_inputs = 4,
> /* .audio_inputs= 0, */
> @@ -2506,7 +2506,7 @@ struct tvcard bttv_tvcards[] = {
> one external BNC composite input (mux 2)
> three internal composite inputs (unknown muxes)
> an 18-bit stereo A/D (CS5331A), which has:
> - one external stereo unblanced (RCA) audio connection
> + one external stereo unbalanced (RCA) audio connection
> one (or 3?) internal stereo balanced (XLR) audio connection
> input is selected via gpio to a 14052B mux
> (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
> @@ -3924,7 +3924,7 @@ static void osprey_eeprom(struct bttv *btv, const u8 ee[256])
> u32 serial = 0;
> int cardid = -1;
>
> - /* This code will nevery actually get called in this case.... */
> + /* This code will never actually get called in this case.... */
> if (btv->c.type == BTTV_BOARD_UNKNOWN) {
> /* this might be an antique... check for MMAC label in eeprom */
> if (!strncmp(ee, "MMAC", 4)) {
> @@ -4086,7 +4086,7 @@ static void avermedia_eeprom(struct bttv *btv)
> /*
> * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880
> * analog demod, which is not I2C controlled like the newer and more common
> - * TDA9887 series. Instead is has two tri-state input pins, S0 and S1,
> + * TDA9887 series. Instead it has two tri-state input pins, S0 and S1,
> * that control the IF for the video and audio. Apparently, bttv GPIO
> * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I
> * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
> @@ -4144,7 +4144,7 @@ static void init_PXC200(struct bttv *btv)
> int tmp;
> u32 val;
>
> - /* Initialise GPIO-connevted stuff */
> + /* Initialise GPIO-connected stuff */
> gpio_inout(0xffffff, (1<<13));
> gpio_write(0);
> udelay(3);
> @@ -4580,7 +4580,7 @@ static void xguard_muxsel(struct bttv *btv, unsigned int input)
> }
> static void picolo_tetra_init(struct bttv *btv)
> {
> - /*This is the video input redirection fonctionality : I DID NOT USED IT. */
> + /*This is the video input redirection functionality : I DID NOT USE IT. */
> btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
> btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
> }
> @@ -4598,7 +4598,7 @@ static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
> * ivc120_muxsel [Added by Alan Garfield <alan@xxxxxxxxxxxxx>]
> *
> * The IVC120G security card has 4 i2c controlled TDA8540 matrix
> - * swichers to provide 16 channels to MUX0. The TDA8540's have
> + * switchers to provide 16 channels to MUX0. The TDA8540's have
> * 4 independent outputs and as such the IVC120G also has the
> * optional "Monitor Out" bus. This allows the card to be looking
> * at one input while the monitor is looking at another.
>
--
~Randy
