There's no reason to allocate dynamically the 'serializer' field in
the driver structure.
Embed the field and adjust all its users in the driver.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
drivers/media/i2c/rdacm20.c | 40 ++++++++++++++++---------------------
1 file changed, 17 insertions(+), 23 deletions(-)
diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c
index 554fd3b3ec3d..7bdcfafa6c10 100644
--- a/drivers/media/i2c/rdacm20.c
+++ b/drivers/media/i2c/rdacm20.c
@@ -312,7 +312,7 @@ static const struct ov10635_reg {
struct rdacm20_device {
struct device *dev;
- struct max9271_device *serializer;
+ struct max9271_device serializer;
struct i2c_client *sensor;
struct v4l2_subdev sd;
struct media_pad pad;
@@ -399,7 +399,7 @@ static int rdacm20_s_stream(struct v4l2_subdev *sd, int enable)
{
struct rdacm20_device *dev = sd_to_rdacm20(sd);
- return max9271_set_serial_link(dev->serializer, enable);
+ return max9271_set_serial_link(&dev->serializer, enable);
}
static int rdacm20_enum_mbus_code(struct v4l2_subdev *sd,
@@ -445,35 +445,35 @@ static int rdacm20_init(struct v4l2_subdev *sd, unsigned int val)
* Ensure that we have a good link configuration before attempting to
* identify the device.
*/
- max9271_configure_i2c(dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
- MAX9271_I2CSLVTO_1024US |
- MAX9271_I2CMSTBT_105KBPS);
+ max9271_configure_i2c(&dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
+ MAX9271_I2CSLVTO_1024US |
+ MAX9271_I2CMSTBT_105KBPS);
- max9271_configure_gmsl_link(dev->serializer);
+ max9271_configure_gmsl_link(&dev->serializer);
- ret = max9271_verify_id(dev->serializer);
+ ret = max9271_verify_id(&dev->serializer);
if (ret < 0)
return ret;
- ret = max9271_set_address(dev->serializer, dev->addrs[0]);
+ ret = max9271_set_address(&dev->serializer, dev->addrs[0]);
if (ret < 0)
return ret;
- dev->serializer->client->addr = dev->addrs[0];
+ dev->serializer.client->addr = dev->addrs[0];
/*
* Reset the sensor by cycling the OV10635 reset signal connected to the
* MAX9271 GPIO1 and verify communication with the OV10635.
*/
- ret = max9271_enable_gpios(dev->serializer, MAX9271_GPIO1OUT);
+ ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT);
if (ret)
return ret;
- ret = max9271_clear_gpios(dev->serializer, MAX9271_GPIO1OUT);
+ ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT);
if (ret)
return ret;
usleep_range(10000, 15000);
- ret = max9271_set_gpios(dev->serializer, MAX9271_GPIO1OUT);
+ ret = max9271_set_gpios(&dev->serializer, MAX9271_GPIO1OUT);
if (ret)
return ret;
usleep_range(10000, 15000);
@@ -558,11 +558,11 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
int ret;
/* Verify communication with the MAX9271: ping to wakeup. */
- dev->serializer->client->addr = MAX9271_DEFAULT_ADDR;
- max9271_wake_up(dev->serializer);
+ dev->serializer.client->addr = MAX9271_DEFAULT_ADDR;
+ max9271_wake_up(&dev->serializer);
/* Serial link disabled during config as it needs a valid pixel clock. */
- ret = max9271_set_serial_link(dev->serializer, false);
+ ret = max9271_set_serial_link(&dev->serializer, false);
if (ret)
return ret;
@@ -572,7 +572,7 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
* This should be compensated by increasing the reverse channel
* amplitude on the remote deserializer side.
*/
- return max9271_set_high_threshold(dev->serializer, true);
+ return max9271_set_high_threshold(&dev->serializer, true);
}
static int rdacm20_probe(struct i2c_client *client)
@@ -585,13 +585,7 @@ static int rdacm20_probe(struct i2c_client *client)
if (!dev)
return -ENOMEM;
dev->dev = &client->dev;
-
- dev->serializer = devm_kzalloc(&client->dev, sizeof(*dev->serializer),
- GFP_KERNEL);
- if (!dev->serializer)
- return -ENOMEM;
-
- dev->serializer->client = client;
+ dev->serializer.client = client;
ret = of_property_read_u32_array(client->dev.of_node, "reg",
dev->addrs, 2);
--
2.30.0
