Check the return value of the max9271_write() function in the
max9271 library driver.
While at it, modify an existing condition to be made identical
to other checks.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
drivers/media/i2c/max9271.c | 30 +++++++++++++++++++++++-------
1 file changed, 23 insertions(+), 7 deletions(-)
diff --git a/drivers/media/i2c/max9271.c b/drivers/media/i2c/max9271.c
index c495582dcff6..2c7dc7fb9846 100644
--- a/drivers/media/i2c/max9271.c
+++ b/drivers/media/i2c/max9271.c
@@ -106,7 +106,10 @@ int max9271_set_serial_link(struct max9271_device *dev, bool enable)
* Short delays here appear to show bit-errors in the writes following.
* Therefore a conservative delay seems best here.
*/
- max9271_write(dev, 0x04, val);
+ ret = max9271_write(dev, 0x04, val);
+ if (ret < 0)
+ return ret;
+
usleep_range(5000, 8000);
return 0;
@@ -118,7 +121,7 @@ int max9271_configure_i2c(struct max9271_device *dev, u8 i2c_config)
int ret;
ret = max9271_write(dev, 0x0d, i2c_config);
- if (ret)
+ if (ret < 0)
return ret;
/* The delay required after an I2C bus configuration change is not
@@ -143,7 +146,10 @@ int max9271_set_high_threshold(struct max9271_device *dev, bool enable)
* Enable or disable reverse channel high threshold to increase
* immunity to power supply noise.
*/
- max9271_write(dev, 0x08, enable ? ret | BIT(0) : ret & ~BIT(0));
+ ret = max9271_write(dev, 0x08, enable ? ret | BIT(0) : ret & ~BIT(0));
+ if (ret < 0)
+ return ret;
+
usleep_range(2000, 2500);
return 0;
@@ -152,6 +158,8 @@ EXPORT_SYMBOL_GPL(max9271_set_high_threshold);
int max9271_configure_gmsl_link(struct max9271_device *dev)
{
+ int ret;
+
/*
* Configure the GMSL link:
*
@@ -162,16 +170,24 @@ int max9271_configure_gmsl_link(struct max9271_device *dev)
*
* TODO: Make the GMSL link configuration parametric.
*/
- max9271_write(dev, 0x07, MAX9271_DBL | MAX9271_HVEN |
- MAX9271_EDC_1BIT_PARITY);
+ ret = max9271_write(dev, 0x07, MAX9271_DBL | MAX9271_HVEN |
+ MAX9271_EDC_1BIT_PARITY);
+ if (ret < 0)
+ return ret;
+
usleep_range(5000, 8000);
/*
* Adjust spread spectrum to +4% and auto-detect pixel clock
* and serial link rate.
*/
- max9271_write(dev, 0x02, MAX9271_SPREAD_SPECT_4 | MAX9271_R02_RES |
- MAX9271_PCLK_AUTODETECT | MAX9271_SERIAL_AUTODETECT);
+ ret = max9271_write(dev, 0x02,
+ MAX9271_SPREAD_SPECT_4 | MAX9271_R02_RES |
+ MAX9271_PCLK_AUTODETECT |
+ MAX9271_SERIAL_AUTODETECT);
+ if (ret < 0)
+ return ret;
+
usleep_range(5000, 8000);
return 0;
--
2.30.0
